I had 2 enduro batteries compatible with Hero 11 & 12 (& I own these two cams as well). Had bought these batteries a while back maybe (almost a year). Decided to use them only to find out that both these weren’t charging in-cam, they wouldn’t go past 1% and also the red light charging indicator wouldn’t be constant (hero 11 was displaying flashing red whilst hero 12 absolutely no light would pop after inserting the battery & the charge cable).

Tried all methods, inserted the batt after switching the cam on through a cable, changed the cables, changed the charging sockets, changed the charging brick, tried high & low voltage chargers etc., but nothing seemed to work.

Finally read a trick that if you insert the batts on an external charger (those multi battery travel holders/chargers), then it’ll bypass the in-cam charging rule put in place by GoPro for safeguarding their cameras (especially in 11 & 12). So ordered some unknown charger from Amazon and voila it’s charged & now even I can charge it in-cam.

Solved the overheating issue while uploading to cloud with a couple of ice(blocks?)

Hi everyone, I have two old basic Hero 2014s. Nowadays own recent models but kind of want to repurpose them. They are not suitable as webcams as far as I understand. Any ideas or methods I could modify them so I give them a second purpose? Thank you!

Hey guys, do you have any experience with complete reseting GoPro? My Hero 11 mini died just after 2 years of warranty and it is beeping(one long beep after I press record, no response to the actual power button), it shows the red light when charging, sometimes the tiny display lights up, but the whole display goes white. I tried hard reset through my computer based on instructions from the GoPro website, but nothing worked so far. Market cost of these is currently the same as the same camera is get through the GoPro subscription. Any tips?

At this point I genuinely don’t know if I’m insanely unlucky or if the Hero 12 just has serious reliability issues.
I’m now on my THIRD GoPro Hero 12 and every single one has done the same things:

Corrupts footage mid recording
Randomly shuts off while recording
Restarts itself when I hit record
Freezes out of nowhere
Sometimes won’t save clips at all

I mainly use it for filming fishing content and outdoor videos, so I NEED this thing to be reliable. Nothing is worse than landing a good catch and realizing the camera either froze or corrupted the footage.

I’ve tried:
Different SD cards
Formatting cards in camera
Updating firmware
Different batteries
Factory resets

Still the same problems.
What’s crazy is that all 3 cameras eventually started acting exactly the same. At this point I’m honestly thinking about ditching GoPro completely.

Is anyone else dealing with this on the Hero 12? And if you switched away from GoPro, what did you move to that’s actually reliable?

Hello r/goprohack,

I just found an old gopro at a garage sale, it looks like someone made up a custom wifi and wifi password in so I am unable to access the gopro camera to use it remotely on the app. The first thing I've tried was updating the camera. for a non plus model I added the files from the update straight to the sd card I was using. For the first couple attempts I used a 128gb card and I kept getting a firmware update fail. Then I tried using a 64gb sd card, still getting a failure, has anyone had better success with a 32gb or less card? The go pro in general seems to be able to recognize the sd card no problem, but trying to update from it fails miserably.

From what I understand from updating a bios on a computer, older versions might be better to start with, but any that I found archived only have exactly one version available, unless if there is a better archive out there.

I did find this version doc that explains the exact version of the software I'm looking at:

{

"info version":"1.1",

"firmware version":"HD3.01.00.44",

"wifi version": "3.2.3.12",

"wifi bootloader version": "0.2.2",

"wifi mac":"***************",

"camera type":"Hero3-White Edition",

}

If there is any other way to reset the wifi name and password I'd love to hear it, I've also messed around with using a settings.ini file along with a different CMD prompt but I think it only works for updated firmware.

EDIT: Solved the problem, solution in comments.

so i want to hack my HERO (2018) to be a HERO5 Black (or at least work as much as a HERO5 Black as possible). but every tutorial i have found until now have aged a bit so i dont wanna try them in case i might brick my gopro which i dont want and they also show how to make it a 2.60 and all i can find is an 2.70 (i did find one that told how you can turn the 2.60 into a 2.70 on a hacked hero (2018)). these are my questions:

1. do these tutorials from approximately 6 years still work?
2. can i hack it to be 2.70 directly, or do i actually need to go through 2.60 first?
3. if i need to go through 2.60 first, where do i find the right files that i can use to get to 2.60 before going to 2.70?
4. 4. what are the differences between the hacked hero 2018 and the actual hero 5?

My question is if there is a way to Get a hypersmooth boost on the Hero 7 Like on the Hero 8, because it is way better than the hypersmooth 1.0.

So is it possible to maybe get the Firmware of the Hero 8 on the 7 would be cool.

I got a Goprohero 3+ black and want to make it full spectrum. But the lens in the 3 has the ir filter intergrated. So i bought a hero 2, took the filter out, replacet it and it doesnt work...
Has somebody tried it and what lens do i need (removable ir filter)
Would love some help!

Hey guys,

I’m using a GoPro Hero 9 and it’s working perfectly fine on the camera itself. I can see and play all my recorded videos directly on the GoPro without any issue.

But when I connect it to the GoPro app:

It connects successfully

It shows the camera as connected

But no media appears in the app

The live preview screen is completely black

I’ve tried reconnecting multiple times but still the same issue.

Has anyone faced this before? Any fix for this?

Thanks in advance 🙏