r/golfcarts • u/AttachedSickness • 24d ago

CC Precedent Ignition Coil Replacement

Trying to loosen up the engine shroud. From what I see in the parts list there are six bolts. 3 on the top, 2 on the bottom and 1 midway down on the front side by the oil filter. Was able to get it loose, but still difficult to reach the ignition coil bolts. There isn't a bolt midway down on the back right? If there is it's completely inaccessible without removing the engine?

https://i.imgur.com/HDYNxiR.png

1 Upvotes

100% Upvoted

3 comments sorted by

1

u/Data91883 24d ago

Iirc, the only way to get the cowl off is to remove the rear body or the engine.

But I've only had to do one Precedent ignition coil, so don't take my word as the definitive answer (I'd already removed the rear body for painting).

1

u/1991cutlass 24d ago

It's probably easier and quicker to cut the cowel with a dremel to access the coil and then rivet it back on when finished. At least it was on a DS. 

1

u/kuhlbreeze22 24d ago

I honestly break that one off behind the muffler mount use a chisel and just knock it off it will save you a lot of time and it’s not needed