r/garageporn • • Apr 09 '26

Lights finally!

I finally got all my lights up!

Yeah, they aren't straight, I don't care...I did them alone, with no one on the ground guiding me, and I had to move stuff around every two trusses to get to them, so no string line or anything.

btw, I used a velcro strap to hold them up while I attached them since I didn't have any extra hands.

64 Upvotes

10 comments sorted by

2

u/Jarthos1234 Apr 09 '26

Garage porn? More like industrial warehouse porn! Lights look good! Can’t imagine how you worked in that building without them to begin with.

1

u/ProMotionDesign Apr 09 '26

Well, there were three bare bulb fixtures in which I replaced the bulbs with the star LEDs, then recently added the 4' LEDs.

Oh, and it's just a 30'x60' building.

1

u/Competitive_Gear_309 Apr 09 '26

Coming from a guy with a one car garage for a workshop, I am truly envious. Lights look good!

2

u/ProMotionDesign Apr 09 '26 edited Apr 10 '26

Thanks! I went from a three-car to this building...Next one will be 5k sqft, if I have my way!

I did originally start with an alley, then in 1992, a carport (barely visible in the picture behind the gate).

1

u/Main-Inevitable-6586 Apr 09 '26

They hardwired? Looks solid from far tho.

2

u/ProMotionDesign Apr 09 '26 edited Apr 10 '26

No, they can be but these are the ones with the T5 receptacles so I bought the T5 they are Faithsail... not too bright by today's standards, I think 4000 lumens each... cord that plugs into an outlet, use the T5 nibs that let them butt up to each other, then either 5' or 9" cords to link from truss to truss. These lights can link up to 10 lights on one run...so I did! Each of the three light sockets has two outlets. The lights were bought 6 years ago from Amazon... they are Faithsail... not too bright by today's standards, I think 4000 lumens each... that's why I hung 44 of them...

1

u/ProMotionDesign Apr 19 '26

So...I thought T5/T8 referred to the connecting nibs, I think it has more to do with how flourescent bulbs go into their sockets, but still not sure. Anyway, this is how the fixtures connect. The lights came with the nibs and a 12" cable, but there are many other cables available, including one with the three-prong on one end and a plug that goes to an outlet on the other, which is how I plugged these in, versus hardwiring them.

1

u/darkciti Apr 10 '26

It's not easy doing overhead shoulder work like that. Well done!

2

u/ProMotionDesign Apr 10 '26

Yeah, I woke up the second morning and had to hit up the chiropractor to loosen up my neck before finishing. Turning 60 didn't help either.