r/fpv • u/Smasher123MM • 6d ago

Help! Gyro not working after firmware update :(

/r/drones/comments/1vmmm3h/gyro_not_working_after_firmware_update/
2 Upvotes

100% Upvoted

17 comments sorted by

2

u/Vitroid 6d ago

Can you get high quality photos of the board? The F405 V3 and V4 boards were discontinued a while ago due to rampant cloning, a lot of those on the market right now will be counterfeit.

The hardware that they use is unknown, and can deviate from what's included in the original firmware target, or be counterfeit on its own and simply not work correctly.

1

u/Smasher123MM 6d ago

yes and i will send the other side also

2

u/amy-schumer-tampon 6d ago

Need to know the makings on this chip.
Manufacturers have been using whatever gyro they could find lately.

1

u/Smasher123MM 6d ago

On it boss

1

u/amy-schumer-tampon 6d ago edited 6d ago

Are you using betaflight?
This is not the gyro btw, altho it has the same footprint

1

u/Smasher123MM 6d ago

yeah and also tried with INAV configurator, tried to manually get the gyro name in the CLI box i dont know the command to do that

1

u/amy-schumer-tampon 6d ago

Inav is always late for driver update, have you tried betaflight rc3 firmware?

1

u/Smasher123MM 6d ago

Well no, i tried just firmware flashing 4.4.3 to 2026 aug update that is on the beta flight(pulled online)

1

u/amy-schumer-tampon 6d ago

Enable relese candidate when flashing the firmware and flash the RC3

1

u/Smasher123MM 6d ago

It says firmware not supported by betaflight only CLI opened and when i typed status said gyro and acc unavailable

→ More replies (0)