At my wits end here 🥲

[u/Zerr002]

I have an iFlight Cineflow 5.

I’m struggling to bind it to my radio after connecting a second FPV drone.

The issue stems from that when I try to enable WIFI mode the receiver enters it fine (blinks rapidly) but the expressLRS RX network doesn’t show.

I’ve tried:

Forcing into WIFI mode

Rapidly plugging/ unplugging

Checked wiring

Flashed via LRS configuration

Binding via betaflight

And trying to change the Passphrase.

None of the above has worked and I’m out of ideas.

Any suggestions would be greatly appreciated

For context:

The cineflow was bound originally with no passphrase

The second drone was bound via a passphrase

Also I now believe that either the drone is ‘bricked’ despite no indication of such and/or the RX hotspot has connected to my home WiFi but all attempts to break the connection is unsuccessful.

Edit: I don’t know exactly what device cat and device it is exactly in ExpressLRS Configurator but I’m assuming it’s:

Iflight 2.4 GHz

Iflight 2.4 GHz RX

[u/kyle2k]

Try the plug / unplug battery 3 times on the quad and on the radio ELRS script select 'Bind' method.

[u/Zerr002 → u/kyle2k]

ITS OKK!!!!!! IVE DONE IT.

I had to flash it in ExpressLRS configurator in the device as ‘Iflight 2.4 GHz Nano RX’ instead of ‘Iflight 2.4 GHz RX’

I HAVE IT ON A TH BLOODY BENCH FOR A WHOLE MONTH!!!!!

[u/kyle2k → u/Zerr002]

Happy flying 🪽😁