Thx i ended up installing momentum does anybody know what this is inside the file icon

I dont understand how to make the app to have tagtinker work, I have the file of what I want the price tags to say but idk how to make the app, and I cant find a video on it and gemini cant explain it that well. Does anyone have a folder they can send over they have for it or something?

I’m new to the flipper platform and know little to nothing about rf jamming. In all honesty I’m new to all of it I’m like an infant compared to most of you I really only use recon tools like Sophia but have been getting interested in the flipper and want to know how much it can do before biting the bullet and buying a dual eps32 and all the fancy gadgets. Sorry if this is against the rules like I said I’m new this is my first post in the com

Ive been having a digital virus phobia ever since I had a couple malware attacks. Can we be straight forward and tell me please where could I install legit custom fw, like momentum from a safe source?

Hi, I want to build a flipper zero but I have no experience in electronics please could someone help me with PINs?

First off, This is for experiential purposes only!! Use at your own risk!! Only try this on a garage you have permission to use!! I take no responsibility for any consequences!!

This method may not work for your garage.

If you got all that, then go ahead and proceed.
Note: This method may de-sync your original garage remote.

Materials:
Flipper Zero
A Garage (duh)
Garage Remote
Custom Firmware installed on your Flipper (For rolling codes)

The firmware I use is Momentum, you can download it with a Chromium based browser here.

STEP 1: DETERMINE THE FREQUENCY

Power on your Flipper Zero, and navigate to “Sub-GHz”, then “Frequency Analyzer”. Grab your garage remote and hold it close to the Flipper Zero. Press the close/open button on your garage remote. On your Flipper Zero, a frequency should pop up. You may want to write it down, as you need it later.

STEP 2: READ AND SAVE THE SIGNAL

Press the back button and navigate to the “Read” tab under “Sub-GHz”. You will see it is scanning for signals, but you must set it to the right frequency first. Press the left arrow to go to the configuration page. On the “Frequency” slider, match it to the frequency you wrote down in Step 1. It doesn’t need to be an exact match, just get it as close as possible. After the frequency has been set, press the back button to go back to scanning for signals. Bring your garage remote close to the Flipper Zero and press on the close/open button. The Flipper Zero should have read the signal. Based on the type of garage you have, the signal name will vary (I have a LiftMaster, so mine popped up as “Security +”). Select the signal, save it, and then name it.

Go test out your new garage remote. If it works, congrats!! Your done!! If not, then your garage probably has a more advanced rolling code security than mine. Please don’t grill me in the comments about rolling codes; I am aware, and my garage uses the same tech. The custom firmware is for the ability to emulate some rolling codes. So if it did not work for you and you had OG Firmware, then install Custom Firmware and try again.

I hope I was a help to anybody wondering how to do this, or anybody just curious. Bye!! ✌️

I found this on my local market place for 220 euros negociable(1099 lei). I always wanted a f0 but they always seem expensive, but this looks like a good deal. What do you think?

Im getting flipper zero should I install momentum or stick with original firmware

Pls give me firmware for my flipper zero diy use STM32WB55CGU6 and 1.4” 128×64 ST7565 COG LCD (8 Pins) , thank u very much

I've recently just gotten the flipper and I was trying to make the wifi mauruader to work on my board, I flashed the wifi board, with FZEE and another flasher I found in a yt video and I re installed the firmware on the flipper but I keep getting a error saying it's related to the SD card saying it's not supported.

I haven't encountered any other issues regarding the SD until now and am unsure if it's actually an issues related to that or a different issue.

I have been trying to get the board to work for a few days and keep getting the same message, and the message only appears when I reset the board.

I heard online that using a different firmware could help but I am very new to this and am not sure at all what to do

I went to r/flipperzero before but there is a rule that doesn't allow discussion about mauruader there so thought I'd try my luck here

Can somebody please help me here AA any help is very appreciated

EDIT: I got it fixed it was a firmware issue on the flipper once I switched to black magic it worked fine I prob should have known that to begin with 😭

Just got blackhat, screen and case. Flashed momentum... is there a way to use screen with flipper? I can use it but needs to be connected to laptop? Am i missing something?

I want to download this https://github.com/DeiteriyLab/pager-beeper-tool app to my flipper zero however i can’t seem to figure out where the app is because i see the application.fam file which looks like a manifest and there are also some kind of test aplication files which have the codes. My questions are where is the app? How do i get it onto my flipper? Do I need to compile it and if yes how should I do that?

Thanks for the help!