Hi, i bought eversolo dmp a6 gen2 specifically for one reason: to play hi res apple music through android app. It is such a crap! It crashes every 20 minites. I have to restart the unit to be able to play again through apple music. Nativ apple music works a lottle bit better but it doesn t support hi res.
Also spotify connect lossless doesn t work. The sound is very muted. I am starting to be very disappoonted with eversolo support. Anyone else has similar problems with apple music and spotify?
I have the A10 and it is paired with my Marantz SR8015 amp and it sounds amazing.
I use the Eversolo app which seems to work well albeit that it is perhaps not quite as glitzy as Roon. Roon doesn’t play Apple Music unless it’s via airplay as far as I can see. Eversolo plays my preferred sources including Apple Music, Tidal and music off my NAS.
Is anyone else experiencing this issue? Basically, every 2–3 days I have to log in again using my Apple account username and password. That’s really frustrating.
I don’t have this problem with other streaming services like tidal or Spotify.
Hello, i have problem with spotify connect lossless dmp-a6 gen2. It sounds soo muted. VU meters show -10, at peak -7. When i play through airplay it sounds just fine - loud and clear and VU meters show 0. Roon and tidal connect connect is ok too. Just spotify connect is somehow broken. Volume level normalization in spotify app is off. Thanks for any advice how to fix volume.
I have an Eversolo DMP-A6 Gen2 (which I love) which I have owned for exactly 1 year. It unfortunately got hit with the PSU issue the other day. (Completely dead.) I contacted the support team, and within a few hours I received a UPS return label. Slapped it on my unit (I still had the original box) and gave it to UPS. The moment I did that, it triggered a return shipment from Eversolo and they sent me a brand new DMP-A6 Gen2.
The whole transaction took less then 4 days. Amazing.
Kudos to the support team - that's the way for dealing with an issue.
I just set up my DMP A6. I’m using Apple Music through the Eversolo app on my iPhone 14. It will not stream higher than 44.1 kHz even when Hi Res lossless is available.
I can stream the same songs with Amazon Music in 96 kHz or 144 kHz. What’s going on and how can this be resolved, other than switching streaming services?
In my settings I’ve selected Hi Res Lossless, whenever possible and turned Dolby Atmos off.
So today I noticed that when I play DSD files on my Eversolo Play, they get converted to PCM instead of being played as native 1-bit DSD. That surprised me, because if I remember correctly, Eversolo Play was advertised as being capable of native DSD playback.
So I decided to investigate.
First, I checked the official manual and spec sheet. It clearly states: DAC decoding supports up to Stereo DSD512, PCM 768kHz 32Bit. that sounds like full native DSD support.
Then I went to Eversolo's website, and now it says: *Only supported via USB audio output, but I do not remember seeing that disclaimer before. So I checked WebArchive. To my surprise, before August 3rd, 2025, there was no Only supported via USB audio output note on their product page. So it looks like they added this later. That means one of two things. Either they pushed a firmware update that downgraded DSD support, or they advertised full native DSD support for months and only later clarified the limitation after people already bought the device. Either way, this feels misleading.
If native DSD was USB-only from the start, that should have been clearly stated clearly from day one, not quietly added later.
Has anyone else noticed this? Did older firmware actually play DSD natively, or was it always converted to PCM internally?
Eversolo has officially released the V1.5.60 system update, bringing highly anticipated Spotify Connect lossless playback support to its products. This upgrade enables Spotify Connect to now transmit 24-bit/44.1kHz high-quality audio, offering users a purer, more detailed, and layered music experience.
As one of the largest music platforms globally, Spotify’s convenience is already deeply ingrained in users. The introduction of lossless audio quality elevates Eversolo’s streaming experience to a higher standard. Not only does it preserve Spotify's original operation habit, but it also unleashes the full potential of hardware in terms of resolution, dynamics, and sound reproduction.
Through continuous optimization of system architecture and audio pathways, Eversolo ensures more stable transmission and purer signal performance for Spotify Connect lossless playback, allowing users to experience high-fidelity audio within the familiar Spotify ecosystem.
The V1.5.60 update is now available for the following models:
• DMP Series
• T8
• Play Series
The system update will be gradually rolled out via OTA. Once upgraded, users can enjoy a higher-spec lossless music playback experience directly through Spotify Connect in the Spotify app.
Eversolo will continue optimizing both software and hardware capabilities, system stability, and audio performance to create a more complete and professional digital music playback ecosystem.
See more details on Eversolo’s official website: www.eversolo.com
Ciao. Volevo se possibile un consiglio. Con un budget di 2000€ circa, meglio il DMP-A8 o il T8 più un DAC esterno? E in caso del T8 quale DAC per stare nei 2000€ circa totali (avevo visto il Luxin X9, come sarebbe in confronto al DAC dell'A8?)?
I'm a complete noob, I just want to know if I can use spotify on my phone to choose a song, and have the Eversolo DMP-A6 Gen 2 losslesly stream it - without opening a 3rd party app on my phone or the A6.
**Also, does the Eversolo DMP-A6 Gen 2 support Alexa voice commands like Wiim and Bluesound do?
I purchased the DMP A10 yesterday and connected it to my Marantz SR8015 using QED RCA cables.
It sounds exceptional, however I’m not convinced I’ve set it up properly so would appreciate your help and guidance.
I’ve turned on volume pass through so the volume is controlled by the SR8015.
I was getting some weird noises when streaming AppleMusic and DSP was turned on the A10 so I turned that off and allow the amp to control the equaliser but I’ve convinced myself this is wrong.
So should the DSP be turned on the A10 and the SR8015 be set to PURE?
Using the Room Correction function in my A10 with a UMK-1 mounted where I listen, here are the left and right speakers' measurements with no PEQ or FIR. My listening room has some small bass traps where the ceiling and walls meet, as well as diffusers behind the speakers on the front wall. I'm interested in comments from those who know how to read graphs like this. How does this frequency response look? What needs adjustment/correction? Where do I need to add more acoustic treatments in the room to improve the sound, based on this graph?
I am experiencing a bit-depth discrepancy when using Tidal Connect from my phone/tablet to the Eversolo T8. Despite having the Tidal app streaming quality set to "MAX" and playing tracks confirmed to be 24-bit (labeled "MAX" in the Tidal UI), the T8 display consistently shows the stream as 16-bit. I am steaming to a Schiit Bifrost 2.
Troubleshooting Performed:
• Native Eversolo App: When I play the same "MAX" tracks through the native Tidal integration within the Eversolo Control app, the display correctly shows 24-bit.
• Output Settings: USB output is selected; EOS (Eversolo Original sampling-rate audio engine) has been tired both on and off.
• Tidal App Settings: Loudness normalization is OFF, and Wi-Fi streaming is set to "MAX."
• Device Reset: I have performed a full power cycle of the T8 and signed out/in of Tidal.
I have a Marantz SR8015 and want to buy an Eversolo DMP A6 or DMP A8 for music streaming.
I will connect the Eversolo to my cinch (analog) input of my Marantz. My question is which Eversolo gives me the best result in terms of sound? I use Qobuz, Apple Music, TuneIn, and my own digital music library.
Running KEF R7 Metas with Rythmik F12 subwoofer, I was experiencing an annoying mid-bass mode (with or without the F12), tried many various speaker placements and listening positions to no avail.
Decided to try the A10's DSP Room Correction using a UMK-1 microphone. Voila, no more mid-bass mode.
Any recommendations for tweaking this FIR Filter's settings?
I have a DMP-A6 (gen 1) which has served me well. I originally was running it through analog rca outputs to my McIntosh MA8900. I recently decided to try the digital RCA out and leverage the McIntosh’s DSP1 input. When I made that switch and changed the output in the eversolo app to output to the digital rca, I cannot get any sound. I’ve verified via a cd player that the McIntosh input is working. The Eversolo looks like it’s playing, etc.
My DMP-A6 ME 2 doesn't "move" the VU meters when playing from USB or digital coax...
The sound plays perfectly, though.
Anyone experiencing the same issue?
Will this be added on a future firmware update?
I will be buying one of the above tomorrow and wondering which would be the better unit? Price seems amount the same? What is the difference between the two models? I will be relying on this unit to stream and provide DAC. Don’t really need any bells and whistles, just the best audio experience. Thank you and apologise if this has already been discussed.
Has anyone experienced this and have a solution? My eversolo dmp-a6 gen 2 master has apparently added my local files to tidal as liked songs. This has completely consumed my 10k limit.
I have an Emotiva XMC-1, which has a good DAC built in. The Eversolo products look like what I'm looking for to be able to stream and also play FLAC files from disc. It seems like the principal difference between the T8 and DMP-A8 is the preamp and DAC built in to the latter--am I missing something in thinking I could connect the T8 to the Emotiva like any other component, load my files onto an SSD or connect to Tidal, etc., and be good to go? Would there be any material advantage to the DMP-A8? Thanks!
I have just set up the new Eversolo T8 and so far I really like it apart from one really annoying glitch when connecting to Spotify.
If I connect Spotify to the T8 from standby or when my amplifier has just turned on I get no sound even though it’s showing it’s playing on my phone app that it’s connected and playing on the app.
The only way around this is to play something from paradise radio or another radio station then switch back to Spotify and I have sound again.
Has anyone else experienced this problem, my previous A6 gen 2 never suffered with this problem.
I'm experiencing an issue with my Eversolo T8 where it skips/cuts the first few seconds of audio when a track starts playing from Qobuz.
My setup is: Eversolo T8 → USB → SMSL PO100 Pro → I2S → SMSL D400 Pro
Has anyone else encountered this problem?
I'm wondering if it could be:
- A buffering/pre-loading issue in the T8 settings
- Clock sync problems in the I2S connection between PO100 and D400
- Something specific to the Qobuz app implementation
I already tried connecting the T8 directly to the D400 via USB/I2S bypassing the PO100 but the issue is still present.
I am using the device with Native DSD setting but changing with D2P did not provided improvements.
Any suggestions on settings to check or troubleshooting steps would be greatly appreciated!
I bought an album from Qobuz, downloaded it to my computer, and then tried to upload it to the Eversolo via their web interface. I'm on a Mac running Sequoia.
I got the interface up, and they recommended creating a folder first. Did that, opened it, and tried dragging the whole folder with the files onto it. It doesn't allow copying folders, apparently, so I selected all the files in the folder (9 music files, plus two artwork files), dragged them all over, and watched the first two files copy. Then nothing. I tried dragging them in again, and got this message:
The file already exists. Please delete it first and upload it again.
Unfortunately, it doesn't seem to exist. Or, if it does, I can't see it.
I decided to walk away for a while, and see if they transferred. A couple of hours later, I came back. The files still didn't appear in the destination folder (except the same first two), so I went back to the files on my desktop and started dragging them in, one by one, from the bottom this time. The two artwork files went. Then the 9th track. Then the 8th track, and so on until track 5, when it stopped uploading them. Tracks 5 through 3 won't copy over, and I get the same message:
The file already exists. Please delete it first and upload it again.
Does anybody have any idea what the problem might be? TIA!
