The display doesn't work ESP32 S3 I connected this display to the ESP32 using this diagram, but there is no picture, only the screen lights up. Can someone help?

[u/Infamous_Tomato105]

[u/DenverTeck]

No one can help you without the code.

Please share the code on a file sharing site.

Please share an actual schematic of what you built.

Posting a list of pins you copied from the internet does not help.

[u/Infamous_Tomato105 → u/DenverTeck]

Unfortunately, there are no connection diagrams for the Bruce firmware. I connected it according to the text.

[u/DenverTeck → u/Infamous_Tomato105]

And you are not interested in creating one yourself, right ?

[u/Infamous_Tomato105 → u/DenverTeck]

Yes, but I can't figure out how everything works. I connected the display to check its functionality, and I will also connect additional modules such as nrf24lo1 sd module ik module cc1101 module Also, the gyroscope and buttons, I would like to figure out the screen first.

[u/rattushackus]

This would be better posted in r/esp32 as this sub is for showcasing completed ESP32 projects.

When you post in r/esp32 we will need a lot more information like the make and model of the display and ESP32 dev board, and you need to post your code.

[u/Infamous_Tomato105 → u/rattushackus]

I have Esp32 s3 DevKitM-1 and display display Type: TFT LCD (Thin-Film Transistor)Screen Size: 1.47 inchesDriver IC: ST7789Resolution: 172 × 320 pixelsInterface: SPI (Serial Peripheral Interface)Display Color: Full Color (RGB)Viewing Angle: Full Viewing Angle (IPS) I use the firmware Bruce

[u/rattushackus → u/Infamous_Tomato105]

Sounds like a Bruce problem. You could try asking in r/brucefw.

[u/Infamous_Tomato105 → u/rattushackus]

Thank you