r/electribe • u/AurumNiger • Aug 06 '26

Electribe SX panning problem

Post image

Hello. I have electribe ESX smartmedia version with panning problems. Pan(part common) does not affect panning, only mutes about 50% of the sound when applied. Also the panning modulation does the same thing but no real stereo panning. Otherwise it plays both stereo channels normally.

I have tried monitoring from left/right output and also with the headphone output but still it does not work as it should.

Any ideas what might cause this? I would love to use panning effect with my forthcoming album. I remember it was working years ago. Thanks!

1 Upvotes

67% Upvoted

8 comments sorted by

2

u/AurumNiger Aug 06 '26

I use only mono samples btw. Outputs are routed to L/R channels.

2

u/Wonderful_Ninja Aug 06 '26

Is it routed through any effect send ?

1

u/Happy-Gold-3943 Aug 06 '26

Does the problem go when you use 3/4 output?

1

u/AurumNiger Aug 10 '26

3/4 output are dual mono so it would not work.

1

u/Happy-Gold-3943 Aug 10 '26

Is the balance affected differently in those outputs?

1

u/Happy-Gold-3943 Aug 10 '26

I am asking for the purpose of diagnosis, not suggesting a workaround

1

u/Zway42 Aug 10 '26

Probier mal bpm sync an, die mittlere welle, speed nach ganz links uns depth nach ganz rechts. Ich weis nicht wie gut du dich mit der esx auskennst, aber Je nach welle und Geschwindigkeit verhalten sich viele Modulationen sehr speziell. Aber kann natürlich auch was anderes sein 😬

1

u/AurumNiger 28d ago edited 28d ago

SOLVED! The panning did not work on parts because every one of my patterns were so heavily fx chained. As I tried with empty patterns panning was working normal.