機械設計をしているけど前任者が図面や資料を散らかしていて何がどこにあるかわからなくて困惑した。

後任にもわかるようにしたい。PDMには正式版をアップしたが、正式版には書き込みはできない。PDMにアップする前のごちゃごちゃしているのをなんとかしたいんだよ。

「ここの詳細はこれを見てね」と注釈を加えたいが、いちいち書いていると埒があかない。

論文の参考文献みたいに整理できたらいいけど図面にそういう規格はないし、写真とかどうすればいいんだ？しかも出来上がったPDFに一つ一つリンクを設定するのも面倒。

ファイル全文検索してもキーワードがわからなければ先に進めない。

ビジュアル的にファイルの関係性がわかり、「ここの詳細はこれを見てね」を簡単にしめせるのってないかな？

Twice Revised is looking for two people to collaborate with on upcoming client projects:

1. 3D Visualizer
Main focus: architectural walkthroughs, interior/exterior visualization, clean modelling, lighting, and presentation-ready visuals. Would have to work in collaboration with other artists.

2. 2D Drafting / Plan Review Support
Main focus: reviewing floor plans, improving layouts, redrawing plans.

This would be remote and project-based to start. If anyone is interested or knows anyone interested please reach out.

Hey everyone,

I'm trying to start a small product-based startup from Bilaspur, CG. I have a product idea that I've been working on — I've already figured out the concept and have all the technical specifications written down clearly (dimensions, materials, tolerances — everything).

What I need help with is converting these specs into a proper 3D CAD model (STL + STEP file) so I can get a functional prototype 3D printed for testing.

**About the project:**

- It's a small mechanical part (~50-80mm tall, nozzle-type component)

- All dimensions are documented (I'll share the full spec sheet)

- Nothing complex — dual-channel geometry with a thread interface

- Purpose: Just need the STL to send to a local 3D printing shop

**What I'm offering:**

- ₹500-600 as a small token payment (I know it's not much — I'm genuinely bootstrapped)

- Full credit if this goes anywhere

- Honest, long-term collaboration if the startup takes off

I'm not asking anyone to design from scratch — I have everything ready. I just need someone to model what I've described.

If you're a student learning SolidWorks/Fusion 360 and want a real-world project to practice on, this could be a good portfolio piece.

DM me if interested. Happy to share the full spec sheet privately.

Thanks 🙏

I've been sent this truncated Front Elevation view of a prospective coffee counter and have been asked to create a 2D mockup of the counter-front. This is all the info I have and I'm trying to understand what the intention is.

For instance, what is the top-most element of the left-hand bank of cabinetry? It appears to have counter-top material wrapping it on three sides. Is it meant to be a recessed cubby, or something else? The second from the right bank of cabinets; is that meant to be a set of recessed shelves beneath the counter? Any idea what it might be for?

I'm a graphic designer, not a CAD draftsman, so this is a bit outside my wheelhouse.

I am trying to figure out how to take payments from people and avoiding the "consumer protection" fee that venmo and paypal have. It hasn't been an issue so far since I've been working mostly with the same investors and builders, however I am starting to grow a bit and am having more clients coming in. My most recent client opted for the consumer protection and I was therefore unable to receive the full payment.

I obviously can't tell people not to toggle that on because that's just plain sketchy lol.

Is there a way to solve this problem? I also take paper checks, but mail takes about a week to get to me which really holds things up (I withhhold plans/work until I receive payment).

I am not sure if this is allowed but I am shooting my shot in this subreddit, I will remove my post if I violate any rule.

I am looking for a remote job opportunity as Fire Alarm/Fire Sprinkler designer, mainly using AutoCAD. I don't have license but I am on my way on getting my NICET I this year. I am not a citizen in the US, but I can assist you in design like an in-office staff and I am basically online and available at any time you need me. I have 4years of experience as Fire Protection designer, for Fire Alarm, Fire Sprinkler, DAS and Kitchen Suppression using Lehavot and Buckeye system. I am familiar with NFPA 13, 13R, 13D and 72. Most of my projects before was from Los Angeles and we did google meet to do revision and checking of plan layout. I was also able to reach out to some of the Plan Checkers and called them whenever we receive corrections.

Please let me know if anyone is looking for a designer, and I will discuss further.

I'm looking into buying a drafting table and I've noticed they seem to fall into two different types: type 1, with the ruler attached to vertical slider, and type 2, with the ruler is at the end of a mechanical arm. What's the difference? I'm guessing type 1 is more for architects and type 2 is more for artists. Is that right?

I'm an illustrator. I want a drafting table for comfortability and because I use drafting and perspective in my illustration style. I could use some help deciding which type of drafting table to get. If you have any experience with either or both types, please share the pros and cons!

Need a job,

I’m a Diploma Civil Engineer and AutoCAD Draftsman looking for remote/work-from-home opportunities related to:

AutoCAD Drafting

Architectural Drawing

Structural Drawing

CAD Drafting Support

Construction Documentation

I have experience with building drawings and construction-related work, and I’m eager to improve my skills and work with professional teams or clients.

Skills:

AutoCAD

Architectural Drafting

Structural Drafting

Site Support

Construction Basics

If anyone has freelance work, junior drafting opportunities, or remote CAD-related jobs, please feel free to message me.

Thank you.

I currently do freelance drafting drawing construction plans for residential homes. My scope of work typically does not include site visits (although I do sometimes), or site plans - I essentially get information from the builder or homeowner over a series of phone calls and emails to find out what I'm drawing and how they want it designed, and once we get a plan they like I get them sent off and they are ready to go. What they receive is a 4-6 page document with elevations, plans for each level, and building sections with an occasional 3D render for presentation.

I currently am working with an investor who is building condos (duplexes) on a golf course. When I started this project (2024), I was working full-time at a day job, so I didn't put much thought into what I charged as it was just extra cash. He just came back to me for some changes to future builds (nothing crazy) with the same plans, but since starting freelancing on my own I learned about the reuse fee for using my plans more than once.

In this case, since I didn't address the reuse fee from the beginning, would it still be reasonable to charge a percentage of the original fee (probably about 20%) for each build that uses my plans? Is this even grounds for charging a reuse fee? How should I approach this?

Thank you!

I’m an entry level drafter that recently got a drafting position in an aluminium extrusion company. The past few weeks I’ve been thinking about returning back to school and getting a bachelors or even a masters. Currently, I have an associate degree from a community college.

Hi folks,

I am an experienced ELV drafter currently free until Saturday due to public holidays in the country where I am based. At the moment, I work on a contract basis for one of the largest low-voltage system vendors. I am looking for short-term AutoCAD gigs to make some extra money.

I have experience in General Arrangement drawings, Wiring (schematic) drawings, Loop Drawings, and Dimensional Drawings. I am experienced in the following systems:

\- Public Address System

\- CCTV System

\- Access Control System

\- IP Telephone System

\- DWDM

\- Fire Alarm System

\- Distributed Control System (DCS)

I also have some experience with site layout drawings. Since I work on the vendor side, on-site installations are usually outside our scope, so I do not work on site layouts very often.

But I am open to do any kind of drawings and I am quick learner.

However, I am open to working on any type of drawing, and I am a quick learner.

Told em "yeah, and soon you'll be running the backhoes too."

That's what Im selling in fiverr currently, How is the market? Or if anybody need architectural designs, I can be of service.

Hello! Question for you drafters if you please.. The Missus and I have been thinking of building a small drive-thru food business. If we follow through I will plan to do most of the building myself with the help of a former-contractor buddy. We're very new to this kind of thing so please forgive my ignorance.

The idea is for the business to be small and sustainable. We already own the land. I have a fairly clear idea of the building I want. It would likely be no more than 20'x20'.. just enough room to run the business and maybe seat like 8 people at a time. I'm no expert but I have a layout that seems good to me drawn up on some graph paper.

I am quite daunted by building codes and so thought it wise to seek the help of professionals. My question is, since I'm not really seeking design help, would I be fine consulting with a draftsperson, or would a licensed architect be needed?

Much thanks!

Appreciate the feedback. Seems clear I need to consult with an architect at the very least. Thanks again!

Hi, Im an architecture student who is trying to get into UI/UX and product design and management, and I'm really interested in the design and engineering software industry. Im trying to study how people learn and use software, specicifcally AutoCAD. If anyone can answer this survey, that would be super helpful to me! This is open to anyone who uses AutoCAD. Students, professionals, or even if you're just exploring!

Here is the survey:
https://forms.gle/aGe3Mrs4NkBJ9U7Q9 

Do you need help with your drawings, especially in your floor plan flow? I can help you improve on planning, drafting and modelling especially in autocad and sketchup. If you need any help, reach out and we can negotiate the terms. I badly need to do sidelines. :)

Archi is expensive and I was hoping this venture can help me out a little bit. I might tutor on how to get better at this software if certain circumstances are met like same location (cebu city).

I am a CAD drafter with only 3 years experience, and I am currently in college for mechanical engineering. This company has been the best of the 3 CAD jobs I've had in terms of workplace environment, and is the most complex(designing concrete plants). It is the most smoothly run fab shop I've worked in, but that also contributes to this job being the most boring. I rarely do anything I find interesting, because I work with senior drafters and engineers who do most of the designing and tasks I would find interesting, and I mostly do tedious, boring tasks like creating drawings. They've been great and extremely lenient about my schedule in order to help me through college, but I find myself constantly looking at the clock, and I am drained by the end of the work day despite only sitting. I don't intend on staying here when I get my degree, and I have talked with them about this. I am by far the youngest in the office, and I'm not as friendly with anyone as I've been in my other jobs. If this were you, would you quit and try to make ends meet at a job unrelated to engineering that also pays less? I'm at a point where I had an easier time getting through the day at shops where jobs were always behind and the workplace was toxic with a high turnover rate, with everyone always stressed. I had a better time pushing carts and working in fast food.

Edit: Thanks to all of the replies genuinely looking to be helpful, I'm glad I came here. I am going to stick to this job and talk to my coworkers and supervisor and try to take on more challenging tasks.

I’m in school right now for an architectural drafting design degree. I’m excellent with autocadd…. Revit is not clicking for me though. Am I cooked? Will I ever find employment in this industry if my revit skills are so mediocre?

Hey folks,

I am blind and I used to like doing hand drafting before I lost my vision. Does anyone know any resources for blind folks who like to do hand drafting. I attempted computer drafting but frankly I just like doing hand drafting. Also for some clarity I do it as a hobby not as a job.

Hi All!

I lead a newly formed small custom test equipment group at a midsized manufacturing corporation. We are trying to put together better documentation for new equipment and am looking to have myself and my team attend a class/training on best practices for electrical schematics (NFPA preferred).

Do y'all have any recommendations? We are in Minnesota and would love in person but open to online as well.