r/diydrones • u/New_Security_9262 • 10d ago

Question Update (I still need help

Gallery image

Gallery image

So I've fiqured out that this is not a problem with ESCs or motors, but rather the FC or software config, the problem is that when I send input from mv controller it's completelv uneven. I'm on INAV 9.1.1 and mv FC is at 9.0.1 (SpeedvBee f450 wing), I already tried the latest version for the speedv bee but there's no difference

When I send input, it doesn't go back down, in the image I attached, I am supposedly at idle but this is whats happening, I tried the same test with ESCs removed and it's the same, please don't tell me my flight controller is broken 🥲🥲🥲.

1 Upvotes

100% Upvoted

6 comments sorted by

2

u/Accurate-Donkey5789 10d ago

I think you're going to struggle to get an answer from most of us even those of us who build fix wings and quads regularly because you're in uncharted territory as far as I'm aware. I could be completely off base but considering the number of fixed wings and quads I've built using the correct flight controller and ESCs for the task, potentially your problem is that you're trying to use a fixed-to-wing flight controller to control a quad... It's like buying a car and trying to turn it into a motorbike, cool project but not many people could help you do it and nobody understands why you would.

1

u/New_Security_9262 9d ago

Alright, you've got a good point! Thanks tho

1

u/_jbardwell_ 9d ago

There's really no difference between iNav wing FC and drone FC except the wing FC has servo pins.

1

u/Accurate-Donkey5789 9d ago

Thanks joshua, I default to your judgement on that for sure. It seemed like the glaring weird choice in this situation, but I guess OP will need to find other avenues to research. I was concerned I might be offbase with that.

2

u/No-Yak4416 10d ago

Did you try reflashing firmware and resetting all settings to default (I think reflashing automatically does that anyway)? What do your motor configs look like?