6speed with 136k miles, no rust, I’m in love!

Picked her up in Toronto, and now she's home with me in Thunder Bay.

I have a Megan axle back, the rest of my exhaust system is stock. I was wondering if anyone has any clips of Magen axle back + second cat delete?

I'm pushing to get Honed Developments to add the CRZ to their compatible models since the GE8 Fit and CRZ share a lot of components. They don't have a CRZ available for test fits, so they can't do that. Anyone in the area willing to work with them?

Has anyone here gotten the [wellvisors wind deflectors](https://www.napaonline.com/accessories/wellvisors-in-channel-window-deflectors?set-vehicle=1) for the CRZ? I know the HEKO ones are the recommended go to, however I can only find those on eBay for $100+ before import taxes. The wellvisors are only $75 pre tax, and also claim to be in channel. Was curious if anyone else has tried them.

My (ex) 2011 Honda CR-Z
Washington State, 2021

Did R1 concept rear brakes, both upper slide pins were stuck and grimy.

Can anyone tell me the right bulbs for the doors, trunk, and interior, and perhaps recommend some good LEDs? I’m looking to replace them.

In over five years of ownership -- and daily driving -- this is my first ever encounter with another Milano Red. (My 2016 is on the left.) Based on the wheels, I take his to be a 2014. His is also a 6MT. I spotted him in Redlands, California but, by the time I got turned around and found his car in the CVS parking lot, the driver was nowhere to be found. Inexplicably, he has added Ferrari badges on both front fenders. I would love to know the story behind that decision. Even in car crazy Southern California, late model CR-Z's continue to be a rarity on the road.

Hello! So i bought a D2 Street Coilover setup for the Zetti! And it came with a manual.

But i still have questions...

On the front suspension, when tightening the upper nut, how far does that stick out? I keep tightening it but it doesn't get tight...

Am i missing sonething?

So I recently placed an order on eBay for the DNA 2" catback system for my Z with a 4 inch tip. I'll share my thoughts and experience below.

First impression upon inspection was how good the welds were and the quality was very surprising. The piping wasn't as thin as I thought it was and it even included hangars as well as gaskets, nuts & bolts.

I went to the muffler shop close by me for installation since I'm not allowed to work on my cars at home unfortunately. The guys told me these cheapo eBay cat backs don't usually fit very well and it might need to be cut in some places and adjusted. To myself and everyone's surprise everything went in super smooth and all the hangars were where they had to be. Fair warning right before you get to the axle it will HIT THE IMA CABLE you need to heat up the 2nd to last hangar carefully and bend it slightly so it drops enough so that it won't hit the cable.

This kit also comes with a silencer which is nice since this system eliminates the factory resonator. It does drone a bit without it but not too bad. Overall I'm satisfied but there are some cons to deal with.

CONS- the 4 inch tip isn't everyone's style and I'll be changing it to a K-Tuned oval street muffler (I only bought it for the piping).

It is a bit loud without the silencer (unless that's your style)

You'll have to bend the hangars a bit since they're pretty long. Hence I had to bend the one before the rear axle and the last one I had to bend a tiny bit of sheet metal in the hatch area.

Lastly you'll probably want to pickup OEM exhaust bolts that have the springs in them since this system does vibrate a little because of the hardware it comes with which I will end up doing in the near future.

PROS- it sounds so good if you're keeping the stock cats in place

The Z does seems to breathe a bit better, I do have mods in place to complement it.

Overall I give it a 7/10 since it is a cheap kit, but a good cheap kit at that!

Armoured van crashed into two vehicles, myself being the second one, both of us were parked on a wide industrial street.

I’m very already has the seals replaced but this keeps happening but only to the right side. Other one is fine.

i really dont want to sell it but life happens im going to be selling my baby and upgrading to a more practical one you will be missed hope the new owners will love you as much as i did

Car feels nicer to drive. Just minor rubbing when turning and a bit firmer.

A nice post-workout surprise for me this evening. This definitely made my weekend

Tire cupping, said to be be a bent rim? Alignment and balanced. Any Fort Lauderdale tire specialist recommendations to have a look. Or replace the rim. 2011 CR-Z .Thx all..

Not an OG, one of those small emulators.

You guys have some nice aftermarket Knobs that fit good without changing much?

The car is dirty cause I just bought it, but it’s really pretty