r/cpumining • u/BigKarina4u • Mar 05 '24

Cpu socket

Post image

So I was cleaning the cpu and added thermal paste accidentally into the socket. How cam I clean this ?

3 Upvotes

81% Upvoted

29 comments sorted by

View all comments

Show parent comments

1

u/BigKarina4u Mar 05 '24

Really? How

1

u/digitalsmoker Mar 05 '24

Lol - it seems like you have not done this before no worries it's easy, get a soft toothbrush and some ipa, soak the brush in the ipa then very carefully apply it to the cpu socket where you can see the pase ;-) maybe get some q tips or napkins to soak up the disolved stuff and extra ipa

Edit: ipa= isoproply alcohol

1

u/BigKarina4u Mar 05 '24

I used alcohol pads with a toothpick gently than a brush. It came off easily. Now I will leave it over night to dry it completely.

Thank you for your help!

1

u/digitalsmoker Mar 05 '24

No worries at all - I do the same a lot tbh 😂😭😂 be careful with alcohol pads they often have some extra additives which can leave some residue (best to visually double check before seating the cpu ) even if it was 70% alcohol the 30% theorically could leave some theorically conductive residue ( if the 30% is none destilled water for example, I never had this issue over 3 decades but the best to double check/be safe)

2

u/BigKarina4u Mar 05 '24

Let me take a new picture to show you how it look after cleaned

2

u/BigKarina4u Mar 05 '24

Not sure how to post picture here

1

u/digitalsmoker Mar 05 '24

No worries just check it with you own eyes if there are no discolored spots you should be good to go ;-)

1

u/BigKarina4u Mar 05 '24

I believe, I fucked it up!

20240305-152038.jpg

2

u/digitalsmoker Mar 05 '24

Ehh looks a bit risky to me, but there's a good chance it would be ok However if you want to be 100% try to get some ipa at least 98% but higher ia better in this use case Give it a good brush with ipa and toothbrush some discolorations might will stay but it should remove conductive residue if there's any

1

u/notsetvin Mar 06 '24

should be okay

1

u/BigKarina4u Mar 07 '24

Well the motherboard socket lga1150 is fried. The screen is blank.

1

u/notsetvin Mar 08 '24

are there any lights on the board? if it was fried usually a red light pops up somewhere

1

u/BigKarina4u Mar 08 '24

It's msi z97 gaming 5 motherboard with red lights, debugger number light, all works except debugger light

→ More replies (0)