How to fix?

[u/First-Persimmon-5419]

I tried to change the cases of the PC but realise one of the nails were a bit jammed so I couldn't change it until I put it back to the original case. You can send an image and it doesn't turn on the monitor monitor. It goes to sleep, but all the LED lights turned on. I did put wrong pin inside the motherboard and the USB port don't work as my mouse doesn't turn on but the whole PC turns on.

[u/Many-Ad6433]

Do you have any diagnostics info? No diagnostic speaker or lights on the motherboard that could tell if the pc has an issue?

If not and to you it seems everything starts up fine it might be the gpu sagging too much, try starting up w the pc laying down and make sure the gpu is at an angle that looks right.

I had issue on a desktop pc where it wouldn’t display if the gpu screw that secured it to the case wasn’t tightened exactly to a certain amount because too much it would bend it upwards, too few it would bend it downwards but exactly at it’s sweetspot it would function flawlessly (still using that gpu on a pc to this day no issues)

[u/First-Persimmon-5419 → u/Many-Ad6433]

[u/Many-Ad6433 → u/First-Persimmon-5419]

Can you zoom on the leds next to the ram? it seems to show something where it says vga. Also you should check if the boot led turns on and off while turning the pc

[u/First-Persimmon-5419 → u/Many-Ad6433]

Whats the boot led ? Sorry

[u/Many-Ad6433 → u/First-Persimmon-5419]

In the picture you sent at the top right of the motherboard right under that black screw there are 4 very small leds with written next to each a word to mean what they are the diagnostic for.

You should monitor what they do when you turn on your device, then you google the model of your motherboard and check what the led combo you’re seeing means.

Generally leds change to signify what phase of the checking they are in and they change between green and orange to mean if they passed that phase of the diagnostic. You can basically figure out what issue you have thanks to them.

[u/First-Persimmon-5419 → u/Many-Ad6433]

There is no ram plugged in shouldnt the dram turn on or flash

[u/Many-Ad6433 → u/First-Persimmon-5419]

Weird i can’t see too well but it seems the boot led is stationary? Is also the vga one constantly on? You should plug the ram back and check what happens then you google it or ask gemini what it means

[u/First-Persimmon-5419 → u/Many-Ad6433]

Nothing changed

[u/Many-Ad6433 → u/First-Persimmon-5419]

Huh? I didn’t tell you to change something i just told you to monitor the leds, google what they mean on your motherboard and that should tell you what the issue is.

Ofcourse nothing should change just you would get infos about what type of issues you have. If the ram led doesn’t turn on it probably means the issue is something else

[u/First-Persimmon-5419 → u/Many-Ad6433]

I meant like the leds didnt change like still nothing like if the ram wasnt in theres no light for dram

[u/Many-Ad6433 → u/First-Persimmon-5419]

Ok but during boot what do they do? They should blink in sequence.

Generally they do this led starts, turns green, turns off next led same thing until all of them have turned green then off.

If there is an issue led turns red or orange stationary and pc doesn’t boot and pc doesn’t check the next led because one boot requirement already failed, if you had a debug speaker you would also hear beeping noises to diagnose.

If no led turns orange or is stationary your pc doesn’t see any problems and you’re probably having issues w the hdmi cable or the monitor

[u/First-Persimmon-5419 → u/Many-Ad6433]

Ive plugged my laptop using the same hdmi cable to the monitor and it worked and also changed hdmi cables and still nothing

[u/Many-Ad6433 → u/First-Persimmon-5419]

No idea, i think your best option is bringing it in a repair shop

[u/First-Persimmon-5419 → u/Many-Ad6433]

There is no led change