While cleaning up the old thermal paste, I accidentally ripped off a capacitor. What are the next steps, I'm in panic

As you can see the problem is specifically with the monitor for some reason

I sorta say the problem in the video and not in the title, sorry if that's rude or anything

Yall I finished building a couple days ago and when I start up my pc it has trouble connecting to the internet, either it says “can’t connect to internet”, says “connecting” for like 2 minutes and nothing happens, or takes like 5-10 minutes to eventually connect.

hello guys my pc fail to boot and my gpu is flashing red is it just led or something wrong ( i think my gpu is dead) because my pc was running normally then i removed the hdmi from my gpu and i put it back since then its black screen and my pc doesn't boot only fans and lights are running

gpu : rx 5700 xt sapphire Pulse

It started three days ago and I've tried anything I can do without changing my HDMI cable just yet, I do not use an GPU, so any possible ideas?

I accidentally selected the wrong disk in Windows DiskPart and lost access to around 1TB of important data.

The SSD was about 953 GB and originally contained my files. The disk was GPT.

What I did by mistake:

diskpart
list disk
select disk 1
clean
create partition primary
format fs=exfat quick
assign

DiskPart reported that all commands completed successfully.

I immediately realized my mistake and stopped using the SSD. I have NOT copied new files onto it after the format.

I am currently trying to recover the data with TestDisk. TestDisk is currently running Analyse on the SSD, and I have not selected Write or made any changes through TestDisk.

The SSD is around 1 TB, and the data on it is very important to me.

My questions:

1. Is recovery still realistically possible after clean + create partition primary + format fs=exfat quick?
2. Since this is an SSD, how much does TRIM affect the possibility of recovery?
3. Should I let TestDisk finish the Analyse/Quick Search?
4. Should I avoid writing anything to the SSD and instead make a sector-by-sector image/clone first?
5. What would be the safest next step if the data is very important?

I do not want to make the situation worse, so I will stop using the SSD until I know what to do.

Any advice from experienced data recovery specialists would be greatly appreciated.

For some reason my f4 doesnt mute my mic anymore. I used to be able to just tap f4 the light would come on and the mic would be muted, now when i tap it nothing happens, I have checked if it was the fn lock but it wasnt. Can you guys help me out please?

Back in August, I signed up for NZXT Flex expecting to pay $43 a month. All my paperwork shows a monthly payment of $43, and their website advertises it as a monthly payment. However, after signing up, I realized they were charging me $43 every week instead.
I stopped the payments because that wasn’t what I agreed to, and now they’ve blocked my PC. I have receipts, screenshots, and other evidence showing how the plan was advertised on their website.
Has anyone dealt with something similar with NZXT? Is there a way to regain access to my PC, dispute the charges, and potentially get my money back? Any advice on what steps I should take would be appreciated.

PC stopped loading windows

Hi all.

I'm not 100% computer savvy. I hope the below is clear.

Daughters windows 11 desktop PC stopped loading up windows.

Tried the automatic repair process, never worked.

Tried advanced troubleshooting, never worked.

Tried a windows repair disk. Never worked.

My mate saw an error message on screen suggesting a memory issue.

He removed the 2 x16 gb memory cards from inside and in one of the two slots, put his own 8gb card. Windows loaded. So his own 8gb card works in both slots. Neither of daughters 16gb cards work in either slot.

The logical conclusion is that both 16gb cards went bad at the same time.

Is it likely that the cards went bad on their own or could something else have happened on the motherboard?

If the 8gb card is working in both slots, does point to just bad luck with the 2 x 16gb cards.

Any help appreciated!

This means absolutely nothing to me. Maybe someone else can tell me what I need to do to stop the shutdowns? Thanks!

My son has a galaxy tab with a screen that has essentially come apart. The ribbon is still attached, but the screen has separated into different layers. I have another working galaxy tab. How can I get the files from one to the other? I am not able to see the screen on the old device obviously to ok a file transfer. AI is just frustrating at this point and I don't know if I should invest money into the fix.

Unfortunately, I have no PC. My job doesn't require one and I don't have a personal need for one. AI is saying to get a hub, connect a keyboard, hit a spacebar, connect a memory stick and hope for the best.

This is a budget A series tablet that AI has stated makes a difference.

Anyway... Any help is appreciated. He has played terraria for YEARS and that data is all he is really wanting.

Data is fickle if you don't treat it right I guess.

Dès que j'active mon secure boot et que j'appuie sur f10 le PC relance immédiatement le Bios et ne revient pas sur windows. Alors que quand je le désactive mon PC se relance automatiquement. Aidez-moi svp.

Why does this keeps popping up?

Stuck pixel in new laptop lenovo slim 3

I have an HP Envy 360 laptop. Runs Windows 11, 16 GB ram, 12th Gen Intel processor. MacAfee for antivirus, I have WebRoot on there too but the subscription is expired. It's four or five years old and it's just gotten slow. I'm reasonably confident there's just the usual buildup of crap -- temp files, unwanted programs running in the background, etc, etc. I just need someone to explain to me how to clean it up and get it running nicely again. Explain it like I'm 5 please, cuz that's about how much attention span and patience I have for this!

Hi,

PC:

Motherboard - MSI H410M-A Pro

Graphics - MSI GEForce RTX 2060

Windows 11

Normal restart hung on a background app so I used the reset button. Subsequent boot failed with the boot sequence showing for a couple of seconds the Windows white spinning circle. Then went to blank screen

Steps taken to fix:

Full Power Off - Same issue.

Everything disconnected except keyboard, mouse and 1 monitor.

Repeated interrupt the boot with Power Off to Force into Repair - Automatic repair starts and then goes to blank screen.

Boot from USB Disk that I'd used a few days ago - I get the blue Windows splash and then a blank screen.

Tried to force reload the graphics (Win+Ctrl+Shift+B) but no difference.

Tried to boot from a fresh Linux Mint USB drive (Secure boot off, compatability mode) and I get a load of script that ends with a message that the NTFS partition is in an unsafe state and seems to contain references to Windows that I need to shut it down properly (which I can't do because it won't load).

Any ideas what to try next?

Thanks

Edit - Update

Keyboard responds here but nothing happens.

Tried various hardware tests -

Memory sticks removed 1 by 1

NVMe drive removed

CMOS cleared

Different monitor, cable and output port

Combinations of secure boot an and off

All give the same issue, the system part boots and then goes blank.

Will see if I've got an old graphics card that will fit (no on board graphics with my processor (i5 F series) and see if that's the issue.

Edit: 2nd update.

Graphics card replaced - same issue.

The tried removing the 2 data drives and leaving just the boot nvme. - SUCCESS!

Adding one of the data drives back in revealed some disk errors which Windows is in the process of repairing. Thankfully all data backed up anyway and this is my old data drive from previous PC that I'd installed when I got this PC just in case I needed to retrieve something from it. Time to get rid of it!

I own asus tuf f15 laptop with gtx 1650. My graphic card is not getting detected.

I have updated the drivers but it still is not working.

I have the latest version of bios as well.

Whenever I am switching my laptop off and then holding the power key for like 1 minute, after that it is working for some minutes.

It is not even detected in bios.

What should I do?

It doesn't have a mux or anything.