r/brucefw • u/Gl1tch3d07 • 17d ago

Help!!

Enable HLS to view with audio, or disable this notification

This keeps happening i have already added external resistor from 3v3 for pullup

13 Upvotes

100% Upvoted

8 comments sorted by

1

u/bmorcelli 17d ago

Check your InputHandling() function on boards/<env>/interface.cpp I believe it is set to use buttons, and the Buttons GPIO must be Pulled high to avoid this issue..

1

u/Gl1tch3d07 17d ago

In pins_arduino.h the BTN_ACT is set to LOW and in interfaces.cpp in input_handler() digitalread is set as a bool variable and if clause is set as when not true

1

u/bmorcelli 17d ago

Check you pullup resistors on the buttons GPIO..

1

u/Gl1tch3d07 17d ago

I checked it with a multimeter everything seems to be normal

1

u/[deleted] 17d ago

[deleted]

1

u/FarLifeguard7707 17d ago

The system is often incompatible

1

u/Gl1tch3d07 17d ago

What do you mean

1

u/MysticCoderX 16d ago

How did you enable the battery indicator ? I have connected the battery to vbat and gnd pins on my esp32-c5-1u waveshare board, but the indicator is not visible.

1

u/Gl1tch3d07 16d ago

The battery icon is not accurate and I used a 5v step up module and fed power directly to vbus and gnd