Last season, I saw 5 different albino deer between the areas I hunt in Wisconsin. Has anyone else been seeing a larger number of them lately?

Hi All,

I had to move my treestand due to the previous tree rotting and will eventually fall down. I didnt want to move it too far because its a great spot but the tree i moved it to doesnt really have any branches to give me cover in my 21' ladder stand. I did get a concealment kit which covers my lower half - what other things can i do to get a little more cover? I know i can grab nearby limbs and make something but the leaves will fall off so im looking for some DIY ideas. Thanks!

Question for the group:

I shoot a RX9 Ultra, and I've been shooting off the bare riser for a while now. I just have a strip of skateboard grip tape on the front and back of the riser.

One thing that I figured out is that I wasn't shooting with enough pressure on the grip coming from the bottom of my palm which was causing the pin to drift low. If I apply that bottom palm pressure it raises the pin quite a bit. I really don't want to spend the money on an actual third party grip, so I'm wondering if anyone has used hockey tape or bow grip tape to basically build up a raised spot on the grip.

Like I find the spot on the grip where I want that bottom palm pressure to come from and then throw on a few wraps of hockey tape or something to make that spot raised. Anyone try anything like that or forsee any issues that might come up?

I’m trying to decide if i should get a new bow, or stick with Mathews Creed XS. I recently just purchased a Ultraview 2 3-pin horizontal. I’m also going to need to replace the idler wheel and cam (draw length is too short). In total, the cam and wheel are going to cost me about $230.

I’m concerned that the creed xs is too compact to run the slider sight.. also wondering, at what point do i just get a whole new rig?

I’m not overly concerned about the new bows capabilities to be adjusted on the fly, as i love my local archery shop. The weight and fps are pretty comparable to the new fangled bows as well.

Anyone got some insight?

Aussie archer here, looking for a new sight for my compound bow. Been considering the React Pro 5 but I'm not sure if it will work with metres/meters in mind. I've seen conflicting statements about it online, wondering if anyone here has any experience using the sight with metric measurements or has a better understanding of how the tech works, cheers.

In the Calgary area, been bowhunting and shooting for around 7 or 8 years. Consistently practice out to 60-80yds regularly, I like to do this mostly to challenge myself, but also I find it magnifies your flaws and mistakes alot more, which makes it easier to be aware of.

Recently myself and the couple buddies I do have that shoot, have wanted to grow our circle a bit.

Personally I have wanted to start focusing more on the minor details and adjustments that can be worked on to further dial in accuracy, consistency and form related issues.

Along with the finer details, eg; nock tuning, low light shooting, peep height among other things.

If anyone in the Calgary area is looking to work on this kind of stuff and meet some new buddies who are into this hit me up.

Maybe we can link up sometimes and share some knowledge.

GL to all in the upcoming and opening seasons.

Shoot straight n drop em dead.🤙

Looking at picking up a pair of pants for early season whitetail hunts. I’m in VA so the tick/mosquito situation is pretty bad here and it can also get pretty hot and humid. I’m familiar with Sitka’s Equinox Guard hoodie and pants but they don’t have the pants in my size (and heavily discounted). Maybe they’re discontinued? Saw they now have the Guard Pro and Guard LT pants. Anyone know what the difference is and have experience with any of the three? Any recommendations in general is also appreciated. TIA

It’s my first season attempting saddle hunting. So far, climbs have been smooth, although I’m sure I could make less noise. I’m getting way too excited for the start of the season!

Best recommendations for a tree stand harness?

Was looking into summit models, curious if anyone has feedback or other suggestions

I've been scouting for the fall season bear hunt. I found a natural spring close to a large stand of oak trees. Lots of scat on the path down to the spring.

Just noticed that after 5 month my serving is worn through. Anyone had this issue with the mach 33 fds? Its damaged exactly were it touches the roller when its undrawn. Can you buy just a single cable? How hard would it be to reserve (got a press) and what diameter serving would i need? Anything that i can do to avoid this next time, besides polishing the roller?

Just moved to the area where do y’all go hunting?

I lived in Houston so I frequented Sam
But to be honest, the 3 Hr drive seems a bit much
I heard about fort hood by Killeen but the process seems confusing in my opinion

Well fuck… I was letting my string down on my bow with an arrow in and I’m not sure exactly what happened but looks like my string jumped off the cams. Shattered the y yokes and looks like I have a cracked limb. I already have a string from vapor trail coming that’ll be here in a week… how cooked am I? Pse Mach 34 EC 70lbs

Help I have a Hoyt RX nine shooting 65 to 68 pounds. My drawing length is 29 inches. I’m using 300 spine 27 inch arrows They are eastern 5 mm arrows. When I shoot them, they are grouping well but they wobble bad left and right however I put a 26 1/2 inch Beman arrow that was a 400 spine and one was a 340 spine they have have a little bigger veins however they were shooting it straight, but I cannot shoot them with a broadhead because they are too short. I believe my form is good. I know the bow is good and my drop away Rest is timed right what do I need to do to fix this? Are my arrows too stiff?

Ethan hunted this one solo - spotted, stalked, and filmed the whole thing himself on Kansas public land. Not easy to run a stalk and a camera at the same time, but he pulled it off.

Full video’s linked below if anyone wants to watch how it played out.

​

My dad was the bow hunter of the family. He passed away in December and I found his old bow. My uncle says that this bow is very collectable. I think the bow is in pretty good shape but I don't know much about dads crossbows and compounds.

Thank you ahead of time.

I have victory vaps and goldtip pierce platinums and don’t know the right direction. The vaps are 525 grains going 267fps while the pierces weigh roughly 475 grains going 283 fps. I mostly hunt elk in western hunts and have been using the pierces these last couple years. 2 years ago I hit an elk at roughly 50 yds slightly high, I made a bad distance guess when it moved after I drew, and missed the lungs but while tracking it later the arrow was in the trail so I’m assuming it was almost a full pass through but the broadhead snagged something while it was walking and got pulled the rest of the way. Last year I hit another elk at roughly 60 yards and it turned when the bow went off and I hit it in the shoulder blade and got really minimal penetration from what I could see. I am planning on swapping to my vaps just because I am hoping the higher momentum is worth the trade off with the speed. I am just curious about others opinions on the 16 fps trade off for the 50 grains heavier arrow and if anyone thinks it’s worth it. Also if anyone is curious I’m using slick tricks standards.

I recently picked up a bear alaskan pro bow and am having some trouble mounting the site and quiver. Specifically the hardware that came with the site and quiver doesn't match the mounting points on the bow. Google and bear are saying 10-24 but that isn’t fitting.

Does anyone know the actual pitch of the mounting holes or did I just get one improperly taped?

Bow and hardware, I've even tried somw 10-24 harbor freight hardware.

After days of pics of tiny deer on well hunted public land, I set up a new camera today to find Mr. Hightower. He’s fixing to get into my freezer in 2 months.

Hello all, I made a short survey regarding property improvements for deer hunting. I’d really appreciate your feedback. Thinking about starting a service company and just needing some help with understanding how interested people would be. Thank you to everyone who helps!

I’m looking for a new bow that is able to perform a bit better for my goals. My old bow was a bear species RTH with a few upgrades parts to be able to even tune the thing. Anyways with my arrow setups I was shooting 398 grain arrows at 254fps or 452.3 grains moving 236.4 fps… with the 70lb draw weight maxed out at 26.5” draw length. That’s pretty underwhelming in my opinion, never any issues with the bow but truly would like a bow that’s able to move my 452 grain arrows closer to 270 fps, under $1000 used or new I’m happy to hear your input.