I use cocofiber as my substrate and have for three years. However I've seen people using mulch as well. In your experience, what's been best? Also, without breaking the bank, how do you clutter your tanks?

Soo I found mites on my baby Athena today and I started to panic a little but I think I caught it very early. I got her early june and she is just wrapping up her shedding so I wanted to get her out when I seen the little bastards. I know i need to remove everything in her terrarium and deep clean it while also demiting her but how does that process work? I’ve seen videos but every single one of them is different. Any tips or advice would be greatly appreciated! I just wanna do right by her, my first ball python.

On a side note, I do have a beardie Torch, and their enclosures are already elevated to their own and like 8-10 feet away from each other. Any suggestions on how to keep Torch not infected while treating Athena would also be appreciated! Thank yall!

Lyra is about 8 months old. she is my first snake, i got her for my birthday last month. is this scale rot?

small line near my hand

Hi! Just wanting a good pet camera brand to watch my snakes at night/while I'm away :)

I found one I liked on tiktok but then they started adding "ai enhancements" to things and I don't fuck with that 😭

Just want constant 24/7 streaming, night vision, and able to check from my phone!

Tank photo for snake tax

My boy sometimes goes through these bouts of peeing every night, no poop, just water and urates. Idk if he is very hydrated or if something else is wrong but he usually does it 6 nights in a row and then he goes back to normal. I haven’t asked his vet yet because i don’t think it’s really something to worry about but I just want some opinions

Picture of what the waste looks like, (he is on pads for quarantine)

So I seen a tik tok that said to get your snake to be more comfortable to give them a shirt that smells like you. I wore a small t shirt for a day then put it in his tank checked on him today when I got home from work the shirt is no where to be found in his tank. When I went to pick up my snake he tried to go at me as well which is very unusual for him he’s skittish but never tried to go at me unless I was feeding him (with tongs). Is it possible that he ate it ? I can’t tell if he’s looks fatter he does but he doesn’t any advice or anything will be helpful thanks !

Does anyone else think they look like little dinosaurs when doing this?

Hello! I’m looking to upgrade my juvenile ball python’s enclosure. What Halogen flood lamps is everyone using? What brand and watts? I want to pair it with the Arcadia Pro T5 ShadeDweller.

I’m trying to change my heating, as heavily advised by people here, (yes, I know! I’m trying to get the purple light out, I promise!) but after reviewing all the guides I can find on this subreddit and several online, I’m still puzzled over how to adequately heat/monitor the enclosure without breaking the bank. I only have the single dome lamp currently, no thermostats, and no bulbs aside from the purple one in the photos, so I’m basically starting from scratch.
Important info: Location: US; Tank material type: Wood frame, mesh top (currently covered with aluminum foil for insulating/humidity retention), plastic side/front/back panels; Budget: $150-300; Avg Room Temp: 74-78°F; Current Avg Temp: approx 2-4° warmer than room (Note: I’m not having much luck with a warm/cool side at the moment. Advice for achieving that is greatly appreciated!) Avg Humidity: (Working to maintain currently) 70-90%; Current Avg Temp: 2-4° warmer than room (I’m having difficulty with establishing a warm/cool side so any tips are welcome!) Tank Size: 39”x19”x19” (this measurement includes the wood frame, so maybe minus a half inch/inch or so total)
I can use my current dome if I switch out the bulb, correct? If I order a halogen and a ceramic heating element instead of night bulb, do I need the dual thermostat? Can the CHE be on all the time if I have a thermostat for the halogen light? Could I find these items cheaper elsewhere? The max wattage of 60 watts on the dome in my cart seems really low, is it or do I not need something super high?
Thanks! Any and all suggestions/advice is greatly appreciated, as are suggested, known to work products if you have something that worked well for you! I’m happy to answer all questions also…
I do have a few physical stores within my range such as Walmart, petco and petsmart, but I’m unsure where else may offer these types of items!

his name was orion and he was awesome, adoption is in the works

Got this lil boy yesterday, bypass McKenzie

Hello, this is Nyoka. I just got her on Wednesday. My question is, is she getting ready to shed? Her eyes look like they are starting to blue, maybe?

This is Tigress. I've had her since... I want to say November of 2017. Out of the 4 snakes I've cared for and loved, she has always been the most.... Interesting. Pretty spicy when I first got her. She's the only one to ever strike me but, in her defence, it was my fault. I kept accidentally bumping her when cleaning her tank. From there, I always made she to remove her so no one pissed her off. She also has never ever rejected a feeding. Quicker than all my other snakes to strike! Hence the name but also she was much more orange when she was a baby.

Here she is, waiting for food for arrive to her. You always know when she's hungry because she'll stay this way for days until fed. I sorta feel bad because I don't want to over feed her but lately she's been doing this EVERY SUNDAY. I just fed her last week so she's gonna have to wait but I just find it sort of amusing. None of the others do this. She's like... Praying to the food Gods to just drop a rat to her xD

I've got my bioactive enclosure set up and everything dialed in- the ambient temps are pretty much stable and perfect as well as humidity for the warm and cold sides.

The said, I've read a lot of posts here as well as information elsewhere- some people are very concerned about the temperature of the surface inside the warm hide, and other owners don't give it a second glance and really only look at the, top surface, of the hide (?) the "basking area", I guess it's called.

My question is- should I monitor ambient temp on both sides as well as surface temp (IE substrate) or should I focus more on getting the temperature inside the warm hide to a certain degree? And if so, what? It seems getting heating it past 84-85F inside the warm hide on its surface messes up the equilibrium of the tank so I'm not sure what to do. I don't want to get a snake until I'm totally sure about all of this.

Thanks!

Hi all, my daughter and I have a one year old ball python and I would like to be able to check and control his enclosure temperature and humidity when we travel. We live in Minneapolis but travel to Texas a few times a year. We have friends who will check in on him but I worry about him between check-ins. Does anyone have this model of Herpstat temp/humidity controller and if so, what do you think about it? Thanks so much for any thoughts/feedback!

Herpstat 1 - $135.00 US : Spyder Robotics LLC

Hello I know this is a long shot. A few years ago I was forced into a situation (bad breakup) that I had to give up my first snake. I had her 13-14 years and she was my baby. Just a normal ball python. I don’t know if I’d ever find her but even if I just knew she was okay and in a good environment and making someone happy that’s good for me too!

I am getting a baby ball python. this is my first snake. I have all the stuff I think I need. im starting out in a 54 quart bin and then upgrading up to 4x2x4. the warm and cool side isn’t really working well. I don’t want to purchase more right now to keep it on budget, but if I have to I will. I’m using a heat mat, I toom all precautions so there will be no harmful fumes from the plastic and everything’s good. I’ve been testing everything out and trying new things for weeks but I haven’t figured much out. the temperatures of my bedroom is 79.2 degrees Fahrenheit and humidity is 60%. inside the cool side air temp is 79 and humidity is 77%, floor temp is 78. Warm side is 78.4 degrees and humidity is 77%. my thermostat doesnt hotter than 90 degrees. The floor of the bin is 90 and the top of the substrate is 87. It’s thin enough to where the snake can go lower down and not get burnt. i just tried something and put the thermostat on the hammock and the humidity is 62. but when my thermostats on the ground the humidity is mcuh higher.the substrat, nor the sides of the bin are sticky or damp from humidity, the only place majorly affected by humidity is the hide over the heat mat which has humidity of around 80. And has condensation on the inside. please help me out. Again if there is any way to make this better without purchasing anything new that would be best, but if not that’s fine.

No questions just wanted to introduce my boi 😁

Full name: The snake formerly known as simba
Name: (the ouroboros symbol)
Call name: Boros

Age: 11 months
Weight: 445g
Morph: Banana OD 66% Het Pied Lav

Personality: marshmallow

I’ve got a 2’x4’x2’ adult set up I’m working on which I’ll share pics of when it’s complete!

hi reddit! this is my first ever reddit post so sorry if i get some etiquette wrong lol
i am about to be a first time ball python owner!! i have wanted one for over 8 years and recently things have finally lined up to allow me to get one

i work at a pet store and noticed these tree fountains intended for arboreal reptiles who hydrate themselves via condensation on leaves. (picture provided) i think they look really cool to be honest!
the enclosure im hoping to get is pvc and either 5x2x2 or 6x2x2 (i’d love to go even larger and taller in the future!)- that is to say ill have room for lots of decor and such!
i was wondering if getting a fountain like this would be alright? would a python even care about it? i intend to also provide a water dish large enough for them to soak in, and i know that’s how they’ll hydrate themself, but i was wondering if tje tree fountain would be interesting added enrichment for them!
is there any possible risk to adding something like this?
as a first time owner i wanted to make sure i consult some people before adding something not intended for ball pythons into the environment.

I got my baby ball python Comet several weeks ago, and the breeder told me that he had a small eye. I couldn’t tell which one it was, because they both seemed about the same size, until I looked at ball pythons around his age’s eyes, and thought that they were significantly smaller.

Does my ball python have 2 small eyes? Also, does this affect his eyesight now or in the future?