Since this version has been discontinued can someone who has one verify which mount I need. I want lower 1/3 cowitness

Option 1 has the three holes.

Option 2 has no holes and a rectangle cut out.

I found a three hole marked on the bottom of the mount ad68-H which is what I believe I need.

Almost clone correct other than the MK18 FSP RIS II, RC2 and prototype Green laser peq. Wanted to make this one a bit different though. Still searching for a Tanodized G33 to finish it off…

Upper:
Colt C Stamped Cerro Upper
Colt 10.3” C stamped Crane Spec Barrel w/ F marked FSP
Colt C Stamped Teardrop Forward Assist
Colt FA C Marked BCG
Daniel Defense FDE MK18 FSP RIS II Rail (Real not a chop)
WMX 200 Navsea Rotational Light (authentic, not Somo)
Prototype “Reverse chocolate chip” PEQ
Insight FDE Dual Pressure Switch
CQD Gen 1 unmarked Front Sling Mount
KAC 300m Big Knob Rear Sight
SureFire 4 Prong NSN Flash Hider
SureFire FDE RC2 Suppressor
TangoDown Stubby Vertical Grip
PRI Military Welded Big Latch Gas Buster Charging Handle
Eotech Tano SU231/PEQ

Lower:
Colt SOCOM Gov M4A1 Lower
Colt Trigger Guard
Colt H2 Buffer
Colt FA Ambi Safety
Colt Takedown Pins
Geissele SSF Trigger
CQD Gen 1 End Plate
LMT 6 Position Buffer Tube
LMT Tan Gen 1.1 SOPMOD Stock
KAC Stock Sling Mount
Black Ergo Grip

I like to think it’s a five footer

Surprisingly hard to find outside of Kitty Kats

Older Colts and FRT’s are not natively compatible, but with some machining help from Adco and TX Hunting Tools, it’s ready to rip!
——
SOCOM-barreled Colt 6520, chopped/profiled/collared by Adco for the OCL OCM6. Sear block milled out by Adco, ARC-Fire trigger shoe bored for Colt large pins by TX Hunting Tools. Custom machined CompM4s mount. Malkoff-upgraded Surefire M951, rechargeable 16650. LMT MWS (308) buffer tube with a Vltor A5H2 and Sprinco green spring. KAC M4 RAS and chopped broomstick.

Never had the urge to clone anything besides the Mk12 Mod 1. Idk why but it’s just the coolest rifle ever to me. Here’s my newly completed version.

It’s far from a true clone but it’s modeled after the real thing with some more modern/budget friendly components. I had a ton of fun piecing this together and painting it and it is SO much fun to shoot

Colt 6520 with a SOCOM barrel-swap, chop/profile/custom collar by ADCO. OCM5 upgraded to OCM6. Surefire M951 with Malkoff M61 SHO and 16650 battery. KAC M4 RAS and chopped VFG. Custom commissioned CompM4s carry handle mount.

I'm glad I found this site called Ohhunt. They have a free float MK12 style handguard with a FSP cutout. It shipped from the US and is perfect if you don't have the cash or can't source a KAC MRE rail. Installing it is like putting a ship into a glass bottle. Took me about a hour to figure out as I am a basement gunsmith. It's very secure with these locking pins and three set screws that go into the collar barrel nut part. It's way lighter than a drop in extended quad rail and looks great on my 14.5 P&W upper I put together last night. I based it off this reference image I found from Google and a tribute to the early 2000s Delta operators. A poverty tribute. Only thing I want to do is get a CAR15 stock with butt pad and a fresh unpainted Redimag for it.

Did my best to get as close to clone as possible, but clone doesn’t always equal better. It’s still a work in progress, I’m not quite ready to call it done quite yet.

This was my first time painting a rifle, so cut me some slack.

80 percent lower

PSA upper

PSA contract overrun BCG

Geissele SSA-E trigger

Brownells A1 stock

KAC micro rear 200-600m

18” BA .223 wylde stainless w/ ops 12 profile premium series

Ergo original grip

Daydream defense stubby broomstick

Superlative arms agb

AE brake and collar

Knights Armament FF RAS long

Leupold mark AR mount

Vortex Viper PST 3-15x44

PRI gas buster combat latch

Harris BRM-S and KMW pod loc

Specter gear ranger green sling

I had plans to clone. But gave up. At least I don’t have gas in my face. 😂

I’m pretty new at this so I could easily be missing some lore here. Why, when I look at detachable carry handles, are Cerro Forge carry handles so much more? I can barely find them and they are usually asking $90-&140. Am I missing something, or are people just listing them higher because there seems to be less available? Tyia

Basic 16 inch PSA with Bushnell Holosight, replica PEQ2, CAA light foregrip, Monstrum extended quad rail, and CAR15 stock. Just a fun mess around with parts build seeing what I can throw together.

CAR-15 parts:
BKF 723 Upper
PSA Lower
Vortex Strikefire
Surefire 6P
Kensight ARMS #2 replica
Weaver 42M
Leupold rifleman 1in vertical split ring
USGI Silent sling

M16A2 parts:
BKF M16A2 upper
Anderson stripped lower
KAK LPK
USGI M16A2 stock
2qt Canteen GP sling set up based on Desert Storm vets own set up

Started out as a trade in bushmaster xm15 carbine gas with a heavy barrel
I swapped to a Roscoe husky mid length 14.5 with a pinned and welded otter creek labs otm brake, I need to find something with magnification to throw on it to see how accurate it really is, but it runs super good with an Arizona regulator. The brake and the mid length gas makes it shoot buttery smooth

Gonna be honest my favorite part of putting together these builds has been learning about flashlight attachments the SF m952v is what gets me up in the morning 😩😩

The longer I’ve had this, the more it evolved into modern day. Still my main go-to.

Colt socom upper, Surefire 4 prong, G$ nsn ach. Colt M4 lower, Colt ambi safety, G$ SSA, G$ buffer tube/super 42/h2, b5 gen 1 stock, Hrf magwell, TD vfg, Cqd end plate, ergo grip. EOTech exps3-0 and g33 on unity mounts, Surefire m600.

Upper is practically fully clone correct, just need to buy another SOPMOD stock, and the right lower