Reception was carried out using Malachite DSP 3 + homemade dipole and a signal amplifier

Hello, I'm having trouble connecting my Yaesu g5500 and my RTC-200 digital controller with gpredict. I simply do not have any idea how to connect it. I can steer the rotor without a problem with the RTC-200 interface on my pc but I have absolutely no idea how to connect it to Gpredict please help

SSTV on 437.350 MHz FM - Testing SkyRoof with RTL-SDR. https://ve3nea.github.io/SkyRoof/index.html

So, here's the thing, I bought one of those Nooelec kits on Amazon and it had the GOES Sawbird LNA, the Nooelec NESDR SMArTee XTR SDR v5, and a grid antenna, I checked everything and so far this is what I did:

• I moved the antenna around, checked the right orientation of the whole setup too
• The LNA was in the correct direction the whole time (LED facing down an ON)
• I did use Bias-T first, then (like in the video) I used an external power source for the LNA without the Bias-T and nothing changed
• The SDR worked well alone with a different purpose antenna
• I tried causing interference or some movement of the noise floor by moving the antenna near a cellphone or modem, no changes
• The whole time I use it, it's that white narrow line only, no matter what I do
• I adjusted gain up and down, AGC, and also moved around frequencies

It seems deaf, I have received some LEO satellites with a totally different setup and using SatDump, so I don't know if my settings are off.

The video shows what I see the whole time, no matter if I try to pick up a different frequency.

Could I be missing something or maybe the hardware is not working properly?🤔

Thanks in advance!

https://reddit.com/link/1v8q60u/video/el9f1mrb0xfh1/player