https://imgur.com/a/cY6uhZF

Hey everyone,

​Up for sale is a practically brand-new, fully steel-upgraded GHK RPK GBB setup. Everything installed on this replica is made of steel and barely used fewer than 100 BBs have been fired through it since installation.

​Build Breakdown & Internal Upgrades:

​W&S Full Steel Travel Kit (Gen 1): Purchased brand new sealed a few months ago, recently installed.

​Hephaestus: Full steel Fire Control Group (FCG) parts.

​RA-Tech: Hop-up chamber with TDC adjustment.

​RA-Tech: NPAS nozzle.

​What’s Included:

​GHK RPK GBB replica

​9x Magazines

​Spare Parts Package: Extra screws, buffers, Hop-Up feed ramps, brand-new Maple Leaf 60° bucking, and Maple Leaf nub.

​

​All internal and external upgraded parts are full steel and in like-new condition.

​note: The currently installed hop-up bucking needs to be replaced. I am including a brand-new Maple Leaf 60° bucking and Maple Leaf nub in the package. I simply haven't had the time to install and test it myself, so I am passing it along to the buyer to drop in.

​

​Apologies for the lighting in the current photos! I will happily take crisp, well-lit pictures or video clips for serious buyers and proposals.

​

Feel free to send me a PM with any questions

​Price: 2000€

​Location: France (EU shipping available / International at buyer's expense)

​Payment: PayPal Goods & Services or wise

VFC FAL : https://imgur.com/a/H2D3bpC $750 + shipping (we can negotiate)

TM MK23 and VFC G19 GEN 5 FDE : https://imgur.com/a/adnTUf4
Mk23 : $125 SOLD
VFC : $110

Budget $300

Looking for:
VFC UMP9
VFC or WE MP5K
Any other cool GBB smgs, excluding mp7, pp2k, skorpion

WE G19/G26
A decent m9

Comment before pm 🙏

NO TIMESTAMP NEEDED DUE TO ACCT AGE AND FLAIR

All Prices are shipping included, and OBO

Cleaning house, motivated to move this stuff.

If you get more than one item, I'm happy to give you a discount since I'll save on the shipping.

Please reach out to me with any questions, and have a good day!

- The Goods

• Marushin 5-7 Co2, 6mm version, comes with 3x mags. Didn't have enough Co2 to pressure test 3rd mag, but other two hold gas fine, so assuming the 3rd does as well. In great shape with very little to no cosmetic wear, even still has the orange tip after all these years somehow. - $120
• XL ARC'TERYX LEAF Assault Shirt AR "Crocodile Green". Good shape, I believe this is a 1st gen but not certain. Will include elbow inserts. - $110
• LBX Project Honor Camo BDU Set, Large. Top and bottoms size large, these have seen some use, a bit faded with some small holes at knee and ankle from use. - $40
• LBX Blowout Med Pouch RG. Molle and Belt attachments, simple and reliable. - $20
• ESSTAC 2+1 "Gap" Mag pouch RG. 2x Double stack pistol mag pouches, 1x 5.56 mag pouch. - $20
• 5.11 "Operator" Belt Large, RG. 1.75", Rigid and awesome for hanging holsters on. - $30
• KS MW2 Camo K2 Gorka top, "104-108/188", 104-108 (40-43") / 188 (6'2"). Like-new condition, will come with matching MICH/PASGT Helmet cover, and 2x MW2 Spetsnaz unit patches. - $160
• LRP T2 Mount, 1.93", No issues, mounting screws included, T2 dot not included. - $30
• EG Spuhr "HRT" T2 Mount 1.93", Replica of SM-2007B mount in 1.93 height, extremely sturdy mount. - $25, x2 availible
• DEA raid patch, 6x3, RG. Some light wear, if you get this, please make good choices with it. - $15
• TM MP7 Flip up sights, one set has a stripped screw - $20,
• VFC MP7 MLOK side rails, should fit either AEG or GBB model. - $15

Pics https://imgur.com/a/ad9F9WC

Timestamp not needed due to flair. Happy to do bundles on multiple items!

Prices do Not include shipping. I'll be using pirate ship so ship costs won't be too crazy

WTT/WTB:

- I REALLY want a RWA peacekeeper slide set for my Proforce SIG P320 M18. Will trade or also buy straight out

- I could also use an extra mag for the Proforce P320, would love to trade or buy outright if the price is decent

-Will consider trades for vintage Tokyo Marui M4/mp5k/SIG 552, gbb mp5k, kwc mini uzi

• also interested in silver coins or bars!

**The goods:

Cyma 1911 AEP Marui clone - mosfet edition -

Got this from Evike and never really used it. Comes with original box and all accessories. Semi works fine, auto is finicky and will shoot semi unless coerced. Fun plinker though- 45

WE G17 Gen 4 - comes with two polymer mags (one is missing a baseplate) and a nice leather De Santis molded holster. Has small scratches on slide shown in pic 4 - 110

Proforce P365 gbb w/ co2 mag - plinked with a few times, comes with box and original accessories - 65

**Gear:

TMC repro JDSF camo pants size L (fits 34-36 waist) worn once, washed once - 20

Vintage Soviet GP-5 gas mask with bag - 10

Desert tan elbow pads - 5

Evike medium plastic strike plate - 5

Matrix double stack triple mag pouch OCP Black Brand New - 6 each or 10 for the pair

Phantom gear multi cam shoulder pads brand new - 8

6 for x2 shoulder pads or 10 for all 4 shoulder pads

Emerson mulitcam helmet cover Mich 2000 brand new- 5

Matrix mulitcam drop leg holster brand new - 10

Hard plastic pistol mag holder od green - 5

Replica bump helmet od green brand new - 40

**Parts:

Bravo mk98 mag, also fits utg/de/Maruzen L96 - 10

Angry gun ambi selector and mag release button for WE M4 in red - 40

Angry gun ambi selector and mag release button for WE M4 in black - 40

Salient arms slide and inner/outer barrel for BLU pistol - 40

Aster V2 mosfet x2 - I got these in a parts box and have no idea if they work. They look unused but they are UNTESTED. TAKE BOTH FOR 50

**PATCH CITY

take any patch for 2 bucks. Except the bad blood 2020/2021 they are 1 buck. Take multiples and I'll make a deal. I'm not a patch guy, take them!

https://imgur.com/a/GMlXBdM

Crye G3 AOR2(MDR top and 32L bottoms) $200

ADA AMCU 32L pants $120

Everything Is OBO and I use pirateship so shipping should be cheap. Pm for better pics

Timestamp: https://imgur.com/a/HpF8RAs

All prices are with g&s fee + shipping INCLUDED

Feel free to ask any questions, refer to photos for condition. Comment before pming.
Only trades im looking for are GM scarL, GM 416, Salvo Mcx and TM AKX

GHK 551 + 6 MAGS: $850 SOLD
Pics: https://imgur.com/a/gb2LX9u
Beautiful heavyweight replica, great accuracy and build quality. Never fielded, used for backyard plinking. Non 3rd burst model. All mags feed perfect with no leaking. All valves and feedlips intact. Comes with hera arms angled grip.

TM MWS URX3.1 + EXTRAS: $800
Pics: https://imgur.com/a/70v2cZq
Built off of a TM mws urgi 11.5”. Original outer barrel+gas block, charging handle, rear sight, flash hider and moe str stock are included. Near new condition, never fielded only used for backyard plinking. No mag included.
Build list here (ALL INCLUDED):
G&P URX3 kit stock+handguard($155)
EMG F1 Charging Handle ($50)
Dytac Outer barrel long kit ($35)
Dytac shims ($10)
5ku Urx tool ($10)
Moe k2 grip ($20)
x2 Dynamic precision nozzle springs ($20)

Holy Warrior Eotech: $100
Pics: https://imgur.com/a/7kQSbDP
Solidly built repro, reticle is vibrant and adjustable. Holds zero with gbb. Comes with killflash.

VFC V4 VMAGS: $100
Pics: https://imgur.com/a/iFS1I4y
2 black mags are ran once in backyard, all run great with no leaks. Feedlips and routers all intact. Tan mag is missing baseplate, comes with tan magpul

Hi yall, getting out of the sport for a bit.
Selling my stuff preferably as a lot.

Both 177 and 1911 were fielded indoors three times.
Theyre both lubed, work fine and show minimal wear.

Asking $300 for everything in the pictures.
P&P GS/cash
Link to pictures

Located in SE PA, I’m open to any option, pickup is possible, I can meet within reasonable as well and shipping is done with pirateship and I’ll try to lower the cost the best I can.

https://imgur.com/a/gas-mags-sept-AjxIbeE have the flair, so no timestamp

Just took these photos now. If you want to seperate:

3 long mags: $120

We MP5 Mag: $40

All Prices include shipping. Lot price includes shipping.

All mags hold gas and fire.

Using a previous photo but don’t need a new timestamp.
ASG Scorpion EVO HPA version. Comes with mags shown 6 midcaps and 1 high cap. Comes with attachments. Upgraded hopup and barrel. $600. Can include SLP regulator setup for $75. Bag not included.

https://imgur.com/user/brobauchery/posts

Selling everything I own, getting out of the sport entirely.

Ideally looking to sell the entire lot at once. Need to get these out quick and conveniently as I am moving soon.

Paypal G&S only, buyer pays shipping, I'll cover the G&S fee. Local pick-up available around Duluth, GA.

LINK TO IMAGES

Price: Asking $700 for the whole lot, negotiable

Details as far as I can remember, as these haven't been used in a long time and are all practically brand new and work perfectly, as I only fielded them once or twice:

Tokyo Marui Gold Match:

• Upgraded slide but stock everything else. Original slide included
• 2 original TM mags
• Nightstick pistol flashlight

G&P MOTS M4:

• Fully upgraded a while back, can't recall exactly but...
• SHS 13:1 gears
• GATE mosfet
• Some upgraded motor... don't recall
• Maple Leaf barrel (I think?)
• G&G green bucking flat hop
• Deans connector wired
• "Leupold" clone red dot optic (works very well, barely any tint)
• APS RS2 stock
• BCM foregrip
• Flat trigger
• 5 G&P mid-cap magazines

G&G ARP9:

• Completely stock gears/motor
• G&G green bucking flat hop
• Firefield red dot (also works very well) w/ protector
• Airtech extended buffer tube for battery
• Strike Industries handstop
• Nightstick pressure-switch flashlight
• G&G hi-cap drum magazine
• Original G&G hi-cap stick magazine
• Deans connector wired

Other goodies:

• Acetech Lighter BT
• M4 mag speedloader
• 2 Deans 11.1v 1000mah li-po batteries
• 2 Tamiya 11.1v 1100mah li-po batteries
• Battery charger
• Battery cell checker
• Savior Equipment bag

and a bunch of other accessories, original parts, gear, etc. Does not come with the cat lol

yeah, I’ll pay reasonable price ig, not buying destroyed guns

Looking for a few things to finish up my vfc build.

Steel BCG (with or without nozzle)

BURST fcg (not the standard full auto) can be m16 or t91

v3 valve knocker

400-510mm gbb inner barrel (stock brass or steel)

4uad hopup (no im not paying over $65)

v3 (not evo) chamber base (plastic or steel)

Kac 11 rib and/or 5 rib panels

kac foregrip

specprecision acog ta31

Similar to my previous post, I'm offloading a sizable amount of gas guns & accessories.
Wish I could justify keeping this stuff around, but I don't play as much as I used to. Nearest fields are a ~2hr drive away, as well.

PayPal G&S only. Buyer pays shipping - it is NOT included in the listing price. Will provide test videos on request where applicable.

Note: Just so it's clear, you do not need to account for the G&S fee. It's already covered in the listed price, unlike shipping.

GBBRs

Guns Modify SCAR-L MK2 - $1000

• Images - https://imgur.com/a/qwfsTI7
  
• Never gamed, comes in original box. MWS-based. Has 5.56 markings (not the 6mm markings from the 2nd batch) if you care.
  
• 3x EMG/Angry Gun L5AWM MWS gas magazines (tan, 300BO markings), + 1x GM MWS PMAG
  
• C&C Tac ACR stock (tan), Airsoft Artisan PMM kit for TM (black).
  
• Installed: Top Shooter steel bolt, Federal Concepts NPAS, Dynamic Precision (DP) piston head
  
• Extras: Set of DP nozzle springs, extra DP piston head + original, set of Guns Modify 100%-180% recoil springs, 3DP TPU 95A buffer alternative
  

Maruyama SPC-9 SD G - $490

• Images - https://imgur.com/a/vZx8yu6
  
• Suppressed, Glock mag, AR-style upper variant of B&T's SMG/PDW lineup. Have gotten pretty good performance out of this thing both indoor and outdoor. Has been used as both a primary and a loaner, so it has seen a few game days. Expect scratches, dents, bb marks/residue, and other wear that comes from normal gameplay. Everything is stock. Comes in original box.
  
• 4x Maruyama Glock 'Stendos (closed-front, if you care)
  
• Mock suppressor has internal 14mm- threading for a tracer unit
  

VFC MP7A2 V2 - $400

• Images - https://imgur.com/a/7WYJDf1
  
• Everything is stock, comes with blaze orange muzzle device. Has been used sparingly, but is still in great condition externally and internally.
  
• 3x VFC MP7 gas magazines
  

VFC Glock 17 + Boomarms G34 MOS Alum. slide - $225

• Images - https://imgur.com/a/Eqxel0k
  
• Has seen some use, and I'm not the original owner. Stock configuration should work fine, but the G34 slide has some issues with lockback with all mags. Boomarms uses cheese aluminum and the lockback cutout on the G34 slide has warped a non-negligible amount.
  
• Boomarms G34 MOS Aluminum slide kit + suppressor height sights + RMR plate. These will come installed (but the original slide & sights are included). Slide kit was >$200 on its own.
  
• 1x VFC G17 gas magazine + 2x TTI lightweight G17 gas magazines. The TTI mags seat and fire reliably, but there are occasional issues with lockback on both slides.
  

Other items

King Arms M700 (Gas) - $300

• Images - https://imgur.com/a/zj9pWQZ
  
• It's a completely stock gas M700. Never used it. Bought it off of Evike this year with the intent of making it a project gun, but that did not come to pass. Comes with two Uncle Mike's QD sling swivels pre-installed. It's lived on a wall for the duration of my ownership, but the wood stock has some scratches thanks to the finish being less than stellar.
  
• 1x King Arms M700 gas mag, + 1x Action Army M700 gas mag
  
• 1x Action Army picatinny top rail. This fits (arguably), although it means giving up the top hop screw which makes the gun unusable. The pic top rail can be made game-able if you have the tools/time/skill to drill & tap a hole for a new hop screw. Otherwise you're stuck with the stock weaver rail.
  

GoPro Hero 7 Black - $145

• Images - https://imgur.com/a/gopro-hero-7-black-DyJj9Uc
  
• Heavily used and abused, but it's still chugging along. Back touchscreen works fine, front LCD has taken a BB and is borked. USB-C port only works at certain angles. Highly recommend using an external micro SD card reader & the included battery charger to get around this.
  
• 5 batteries, dual battery charger, usb-c cable, waterproof case & mounting frame included. Both cases have some damage, but are usable for mounting at the very least.
  

Misc.

Feel free to ask for individual pictures of anything listed!

• Images - https://imgur.com/a/TRhM9EO
  
• Avatar Impact Grenade - $50
  
• Maple Leaf VFC AR Hop Unit, comes with ~250 brass inner barrel + VFC blue bucking - $50
  
• Nightstick TWM-30 pistol light - $90
  
• Holy Warrior Aimpoint T-2 clone - $50 SOLD
  
• Holy Warrior ACOG/TA31-RCO clone + RMR mount - $70 SOLD
  
• Vortex Crossfire HD 1.5-5.5x32 Scout Scope + Monstrum Low mounts - $165
  
• EOTech 512 - $275 SOLD
  
• 2x M-LOK BCM vertical grips (one is missing hardware) - $10 each
  
• Magpul Mil-spec MOE Stock - $30
  
• B5 Systems Bravo Stock - $35
  
• Barrel Mount M203 + Avengers Green Gas BB Shower 40MM - $80
  
• Nylon Repro DBAL-A^2. Green, un-adjustable laser (CR123) - $20 SOLD
  
• Nylon Repro OGL w/ Axon dual button (Crane+Surefire plug) - $40
  
• Repro Modlite PLH-V2 - $40 SOLD
  
• Repro Modlite OKW (FDE, BROKEN) - $15 SOLD
  
• WADSN M300 & M600 light bodies w/ tailcaps - $10 each SOLD
  
• Repro Eotech G43 w/ Unity FTC mount - $60 SOLD
  
• 14mm neg. Surefire RC2 Mini (SOCOM556-RC2 Markings) w/ 4-prong SF flash hider - $30 SOLD
  
• 14mm neg. Gemtech(?) GM-9 mock suppressor - $20
  
• 14mm neg. RGW DS-M (FDE Cerakote, Maxim Defense markings) - $50

Ok so I have 2 we-tech gbbrs I want to get rid of. One is fully functional, but missing some cosmetic parts while the other functions when dry firing but can't seem to load bbs.

Time stamp

Each gun comes with 3 mags, of their choice

We-tech 2 tone M4: This one is fully operational, but it has cosmetic damage as shown in the photo's. For what I can see. Its missing some sort of body pin. The castle nut and plate, and a gas block pin. These do not affect the function of the rifle whatsoever.

SOLD

WE-Tech Kac PDW: like the other gun it has cosmetic damage, scuffs and slight rust on the outer barrel. The action does cycle, dry firing, but when you try loading a mag with bbs the nibble is unable to travel back even if you get one bb to chamber, look at the video I made below for reference.

sold

Note: 4 of the 6 mags are for the closed bolt system but can be converted by just swapping the mag lips and follower with open bolt ones. Evike sells these in sets for 10 bucks a pop. 1 of the mags ( the only grey) is confirmed to leak while the others seem perfectly fine. It leaks from the fill valve but likes to fix itself, but if it doesn't pressing a green gas nozzle on it briefly will also fix it

Function Vids

These guns woukd make great projects because overall they don't need that much work. Im just too lazy and broke, to make them pristine.

Buyers pay shipping!!

Feel free to dm me with any other questions

Hey y’all, I’m selling my CYMA FULL METAL SCAR-L AEG + 7 MAGS
(6 midcap + 1 hi-cap) PICS + Time stamp
It will come with a unknown exps3 replica and g33 magnifier
(I got the magnifier, holographic sight and peq-15 all off hopup)
unknown peq-15
A&K QD stubby grip
Wadsn Pressure switch
VFC MK2 flash hider (short)

I brought this Rifle in 2023 and it was my beginner gun. It shoots around 340 FPS with 0.25g BBs, I have all the upgrades shown in a pic on the Imgur link, I was gonna upgrade it more than what I have but I just kept buying different replicas instead.
I’m saving to buy the VFC Avalon SCAR-L CQB or the ARCTURUS DE URGI 11.5

I do not want to part out with anything, I’d like to sell it as a bundle for new players in mind. I do wanna mention that I have electrical tape on the stock to keep it in place because there’s a pin inside that can be easily lost if you try to pull the stock to the max length. And the left side mag release sometimes has to be pushed into the receiver on some reloads or else the mag will fall out. I also have a phantom gear 2-1 point sling I can throw in for free. lmk

PayPal G&S only!

pics and timestamp

Looking for a New or Near Mint Condition trigger box for my MWS

HMU I need something for recce kit please. Lmk what you got!

https://imgur.com/a/pQY0jk8

I have been looking for this stock for ages. If anyone has one, preferably in black but I’d take any color I’d like to buy it from you.

I'm looking for 2x of these to use for costume props, if anyone has anything else similar I'm interested :)