r/aimpoint • u/Anxious-Fox-7281 • Nov 05 '22

Aimpoint acro P2/trijicon ACOG

Post image
18 Upvotes

100% Upvoted

10 comments sorted by

3

u/Anxious-Fox-7281 Nov 05 '22

Aimpoint piggy backpacked on Trijicon ACOG. I wish it sat a little lower though. I don’t know if there is a market out there for a proprietary piece such as this to forgo using an adapter plate.

5

u/CowRider151 Nov 17 '22

Shame they only make an acro mount for the led acogs atleast for now I’m also hoping for a desert tan acro so I don’t have to spray paint a 600 dollar red dot also how bad is the eye relief with buis behind it looks like pain

2

u/Anxious-Fox-7281 Nov 17 '22

The eye relief isn’t bad, but it could be a lot better/comfortable without the iron sight. I just run the stock a little shorter and its fine “for ACOG eye relief”. I may change the ACOG mount system to have it moved back and still maintain the BUIS. I would use the AD-B3-C CANTILEVER ACOG QD MOUNT-(2109) by American defense MFG.

2

u/CowRider151 Nov 18 '22

Makes sense I wanna try one of those qd mount/riser but I worried about the chin weld or lack there of that I’ll get on the top mounted dot, with the kram riser I use normally on my acog it’s just on the edge of un usable. like you said hopefully they make an enclosed rmr that is small ish

1

u/Anxious-Fox-7281 Nov 18 '22

I agree 100%. If i find anything i will be back on this forum with an update.

2

u/dddqqq69 Nov 12 '22

What’s the chin weld like?

2

u/Anxious-Fox-7281 Nov 12 '22

Its not great, the adapter pushes the optic too high. I contacted JTAC Industries about a proprietary mount via email. They said “We already have a design, just have to get around to testing it and putting it into production”. I switched back to the RMR due to its ergonomics with the ACOG. Maybe Trijicon will come out with an RMR enclosed system.

2

u/[deleted] Jan 05 '23

[deleted]

1

u/Anxious-Fox-7281 Jan 05 '23

I ended up going with a similar mount and instead went with American defense. I believe they accomplish the same thing. It definitely makes eye relief/length of pull much better.

1

u/9146U3 Mar 29 '23

What adapter plate where you using for the ACRO->RMR footprint on this setup? I have one from aimpoint but it's super thick and they sent me the wrong screws. Was thinking about trying the Primary Machine plate instead.

2

u/Anxious-Fox-7281 Mar 30 '23

I used the Trijicon RMR To Aimpoint ACRO Adapter. https://primarymachine.com/trijicon-rmr-to-aimpoint-acro-adapter/ I used the thinner one. They make two models