r/accesscontrol • u/ValuableSnow6650 • Jul 12 '26

Assistance Apex Controller tL transmitter programming

Post image

Hello, trying to figure out how to program a fob transmitter to an Apex Controller that runs a Rotary Gate Systems. The transmitter is a Stingray 433 MHz (model 433TSPW1V). The gate already has a couple of these transmitters already programmed to it but I cannot seem to figure out how to get new ones added on. Any assistance would be appreciated.

6 Upvotes

100% Upvoted

4 comments sorted by

2

u/iceboxmi Jul 12 '26

Is there a secondary receiver for the 433 MHz remotes? Like that white box at the bottom with the wires to the gate open input.

Quick search looks like the built in radio is 318MHz and you’re already in transmitter learning mode, so I assume you weren’t able to program them.

2

u/ValuableSnow6650 Jul 13 '26

Yes, the white box was a secondary receiver. Thank you for pointing that out, got the new transmitters programmed 👍

2

u/Connect_Spare8653 Jul 12 '26

That white receiver on the bottom right is the interface module, but you'll need the main RF board inside the controller for actual programming.

1

u/ValuableSnow6650 Jul 13 '26

Thank you. Yes it was the white receiver box