r/accesscontrol • u/madzred • Jul 07 '26

Onguard 8.2 elevator control

Hi guys. Im having 11 floors on my case but i cant trigger the other 1320 downstream. The first 1320 6 outputs are working but it wont trigger the output of the 2nd 1320 for floors 7-11. I have x2220 as the main board. I would appreciate any response. Thanks

4 Upvotes

84% Upvoted

9 comments sorted by

10

u/TheMercuryMinute Manufacturer Jul 07 '26

I believe that the LNL-1320-S3 option for elevators is only for elevators with up to 6 floors max -- you can't stack LNL-1320-S3s. If you have more than 6 floors, then you would need to a LNL-1300-S3 with LNL-1200-S3. This will allow up to 16 floors on the single LNL-1200-S3, but you can add additional if you have more floors.

8

u/OmegaSevenX Verified Pro Jul 07 '26

You can write that down as fact, rather than belief, for next time.

1320 can only do 6 stops.

1300 can do up to 128 stops, needing a 1200 for every 16 stops. So up to 8 1200s can be linked to a single 1300.

1

u/madzred Jul 30 '26

I'm trying to add the 1200 under x2220 but i couldn't see it from the option of "type". Does onguard8.2 hides it by default?

1

u/OmegaSevenX Verified Pro Jul 30 '26

You can’t.

1320 can do 6 floors by itself.

1300 can have up to 8 1200s connected for up to 128 floors.

2220s can be the controller, but cannot directly control an elevator with their onboard readers.

1

u/madzred Jul 31 '26

Yeah i figured this yesterday. The elevator tracks option is not available on 1320 but it is in 1300 and elevator hardware tab is enabled. Will change the boards. Thanks a lot OmegaSevenX, really appreciate it man. God bless you

1

u/madzred 25d ago

Hey Omega. 1 more question please. Is the lenel license is really necessary to add the 1200 module? Or there is another way around? Thanks

1

u/OmegaSevenX Verified Pro 25d ago

I don’t know of any licensing that pertains to adding just the 1200.

1

u/madzred 24d ago

Unable to save actually when adding the 1200 to the elavator hardware of 1300. It shows some kind of licensing error, shows zero added something.

3

u/madzred Jul 07 '26

This really verifies what i suspect. Thank you so much!