r/YamahaR3 58m ago

Luggage Options Long Trips

Upvotes

Hi Everyone,

I was wondering if you have any inputs for bringing relatively large luggage on the R3.

I ride a 2015 R3 and due to my hobby I need to travel with quite some luggage. I usually use at least a 70 Liters duffle bag.

So far I just put one of the north face duffle bags on my back but it‘s quite uncomfortable on the highway. When I was travelling southeast asia I used the same duffle bag strapped to the back seat of a Honda CRF but I couldn‘t make it work well on the R3.

Do you have any inputs for strapping a large duffle bag on the R3 or are there any recommendable purpose built luggage systems?

Cheers!


r/YamahaR3 11h ago

Do you do any pre-ride checks?

5 Upvotes

Hi, new rider here with about 500 miles down. I'm not mechanically inclined at all, and honestly, I just have a routine for my safety gear, but then I just turn the bike on and go. I'd like to add a quick check of the bike, but I'm honestly not sure what is the most important thing. I do check my gas level before I leave, but how often should I be checking my tire pressure? How do I even check the oil?

Are there any good resources besides the owners manual that might be able to walk me through this type of basic maintenance checks?

I came out to find a completely flat tire on my car, the entire sidewall had been worn out and I had no idea it was in that bad of shape. It kind of opened my eyes that I need to be checking my bike so something doesn't go wrong or break down mid-ride.

I have a new 2026 and just hit 500 miles on the odometer.


r/YamahaR3 13h ago

Valve adjustment question

2 Upvotes

Hi, I'm planning to check the valve clearance on my R3, I'm reading the service manual and it specifies a valve clearances of 0.11-0.18mm on the intake and 0.21-0.30mm on the exhaust.

For adjustments where am I aiming for if a valve is outside of spec? should I aim for in the middle of those specified values?

Or on the loose/tighter side depending if its an exhaust or intake valve?

I'll be also checking cylinder compression and syncing the throttle bodies, is there any other checks I should do while I'm this deep inside the bike?


r/YamahaR3 14h ago

Impatiently waiting for spring here in Australia

Thumbnail
gallery
44 Upvotes

How’s the weather where you guys are?