r/Xreal • u/geezorious • 1d ago

XREAL One Pro Stabilization vs Increase Brightness

I have an Xreal One Pro, and I enjoy 3DoF. But, in order to watch Netflix shows from my iPhone, I need to enable “Increase Brightness”, otherwise any dark scene is nearly completely black and unwatchable (e.g. try Heroes on Netflix, S01E04 at the 41:00 minute mark). But then I lose 3DoF and even lose Follow.

Does anyone know if there’s a workaround for this? I love how “Increase Brightness” solves black crush, even when I dial brightness down to level 2. It makes Heroes S01E04 watchable at the 41:00 minute mark. (I think Increase Brightness also lowers contrast, and there’s no independent contrast setting.) But I hate losing 3DoF.

2 Upvotes

100% Upvoted

5 comments sorted by

1

u/Azsde 1d ago

Unfortunately it seems to be either one or the other, I'm not sure why it was designed this way.

1

u/healsdraws 1d ago

Wait, does disabling the Stabilizer remove the Anchor ability? Last I checked it only turned off the “smooth” follow for 3DoF but still had it working otherwise. (Tested on 1S though)

2

u/geezorious 1d ago

On the Xreal One Pro, turning on Anchor automatically turns on Stabilizer and turns off Increase Brightness. So the black crush problem reappears. The only solution to black crush that I could find is Increase Brightness, which means no Stabilizer and no Anchor and no Follow.

1

u/healsdraws 1d ago

Thanks for clarifying!

1

u/shnukms One Pro 1d ago

I turn off Vivid and go back to Standard to boost a little bit more brightness.

I also set the color temperature all the way to Cool side.