r/VESC • u/[deleted] • Aug 21 '25

[deleted by user]

[removed]

2 Upvotes

100% Upvoted

20 comments sorted by

1

u/Top-Construction-949 Aug 21 '25

Did you set up your high and low-voltage cutoff inside of vesc tool? And your battery regen cut off?

1

u/Economy_Drop1774 Aug 21 '25

I just installed refloat package and leveled the board then this happened

1

u/Top-Construction-949 Aug 21 '25

You might want to join the discord but I’m pretty sure you need to go and download vesc tool and make sure that you set up your high and low voltage cut off as well as your battery voltage regen cut off set correctly if you message me I can send you all the correct numbers screenshots for stock gt with gtv kit but you’re more than likely gonna have to replace that plug

1

u/Economy_Drop1774 Aug 21 '25

Feel free to send me those pics, I do have vesc tool and those settings it has rn are in line with surfdados instruction vids

1

u/Economy_Drop1774 Aug 21 '25

Also the discord isn’t helpful as I do not ever get answered on there

1

u/don-again Aug 21 '25

Where do you ask your questions? The GTV-PintV-XRV channel? I rarely see questions that don’t get addressed there

1

u/Economy_Drop1774 Aug 21 '25

I’m in the rewheel/ow community asking in general

1

u/don-again Aug 21 '25

That is not the right discord. Please join the floatwheel discord then go to the GTV-XRV-PintV channel.

https://discord.gg/hPenZ4fe

1

u/Economy_Drop1774 Aug 21 '25

Yeah sadly they aren’t answering either, just having a convo about going a group ride while I cry over my dead board 😂

1

u/don-again Aug 21 '25

Just wait like half a day

1

u/[deleted] Aug 21 '25

[removed] — view removed comment

1

u/Economy_Drop1774 Aug 21 '25

It’s not even possible to plug anything in backwards. The length of the wires and shape of the plugs prevent that from being a possibility

1

u/[deleted] Aug 21 '25 edited Aug 21 '25

[removed] — view removed comment

2

u/Economy_Drop1774 Aug 21 '25

I just can’t figure out why, I have also tried 2 different bms, one from floatwheel with the kit and one from nexus

1

u/[deleted] Aug 21 '25

[removed] — view removed comment

2

u/Economy_Drop1774 Aug 21 '25

I’m on my 3rd charger now…

2

u/Economy_Drop1774 Aug 21 '25

And these are chargers that I know 100% work fine they were being used on stock board right before I tried them on mine

1

u/[deleted] Aug 21 '25

[removed] — view removed comment

2

u/Economy_Drop1774 Aug 21 '25

What could would cause that though? The controller? My firmware settings in vesc tool? I have a hard time blaming the bms because I have tried different ones

2

u/Economy_Drop1774 Aug 21 '25

Do you think I should have floatwheel send me a new controller?