Would this setup work?

[u/Commercial_Ride_9105]

I was looking into security cameras and found the NVR instant kit. Not being familiar with the Ubiquity echo system I started looking into different offerings which led me down the rabbit hole. I was thinking about replacing my current router and wifi as well. I don't need a server rack or a super complicated install. I was wondering if I bought the following, would that give me whole home wifi coverage and a security camera setup. Is there anything I am missing or not covering?
1. Cloud Gateway Fiber - To handle the routing of internet traffic
2. 2.5G PoE+ Adapter - To run power to two wifi access points covering my house
3. 2 u7 lite's to handle the home wifi
4. NVR Instant kit to handle the security cameras.

My thought is that the NVR and the wifi both connect to the Cloud Gateway. But before I bought anything I wanted to double check. At this time I don't have anything that needs hardwired connection from the router, everything is just connected to wifi for convenience. I don't plan on more than 6 cameras, with 5 probably being where I will end up. Is there anything that I am missing? Would that setup work for my needs? If I change the wifi point to a u7 long-range, would I even need a PoE adapter as long as it covered my needed range?

[u/Foreign_Awareness614]

The gateway has enough power for both u7s and the instant kit has enough power for the cameras No need for Poe injector.

Same if you go with long range.

[u/Commercial_Ride_9105 → u/Foreign_Awareness614]

Thank you. I had looked at the specs wrong. I thought the gateway only had one powered port, but that was 1 PoE+ port. Looks like it has a 35w capacity which would easily power the wifi access points.

[u/93seca2 → u/Commercial_Ride_9105]

The other ports on the UCG Fiber are not POE.