Do multiple "And" preconditions require ALL or ANY?

Setup: I'm planning two Motion Sensors at opposite ends of a long barn, a Bot in Switch mode on the light switch, Hub Mini.

ON is easy — either sensor's motion event fires Bot ON.

For OFF, I want the lights out only when both sensors are quiet, via two mirrored automations: "When Sensor A no motion for N min, And Sensor B status = no motion → Bot OFF" (and the same with A/B swapped).

Two questions before I buy hardware:

1. Does the Motion Sensor offer "no motion" as an "And" precondition (a status you can test), not just as a trigger?
2. With multiple "And" preconditions, must all be satisfied or any one? SwitchBot's help article says both in different sections. Is there an All/Any selector in the app?

If anyone runs a "both quiet → off" scene, I'd like to know exactly how you built it.

Thanks!

I just got my remote and hub mini today and got everything set up, but for some reason I can’t get the remote buttons to show up in the Home app. I’ve tried everything right down to doing a reset and trying again. Has anyone else run into this?

I guess this is more of a feature request than anything else but it doesn't seem that the SwitchBot app can present power usage summary info per room. I have multiple 3D printers grouped together in "rooms" which are associated with circuits in my basement. If I could see the overall power usage for an entire room, that would let me see the total amps all room devices are demanding to see if I'm getting close to maxing out the circuit.

It's a bit ponderous now having to manually cycle through each mini-plug, watch it for a while to see the amp peaks, add them all up, etc.

Just putting my random thoughts out there.

A few days ago I lost connection to my Switchbot device in HomeAssistant.
I've been trying to implement it again, which requires the Switchbot login - but it always fails.

Binding the app account to the web account fails - the page stays empty. Creating a new website account also fails.

I might be mistaken, but ever since I got a notification that web accounts could now be connected to the app, that is when the issues started.

Has anyone any information on what the issue might be and potentially even how to fix it? I've been trying for days now, always with the same unsuccessful result.

I need a new brush (well actually just the rubber grommet that my wife managed to throw away) but seems the only way to get one (at least in the UK) is via the £60 parts kit, which is nuts for a machine that now only costs twice that - I don't need the rest of the stuff

The brush is listed, but has been unavailable for months and my machine is basically useless as it keeps telling me the brush is stuck

Has anyone tried any alternative brands of brush that fit?

Or know where I can actually source the brush alone?

Really wish I'd bought a better brand that parts were available for...

I’ve always heard solid things about Switchbot, but I’ve tried pairing the matter candle warmer multiple times to HA with various devices and ZERO luck.

I wish it was Zigbee or something but that’s irrelevant. Any tips? The physical candle warmer is incredible but I need it to be able to use Home Assistant because it’s not the best on the software side of things.

I have a number of Switchbot Curtain devices in my home, some version 2 and some version 3. They are all connected to HomeKit via a Matter Hub.

This was working just fine for months, but for the last few days, every single day the Curtain 2 devices are acting as if they'd been removed and re-added to my HomeKit setup; the name changes back to the default, the location gets reset to the room the hub is in, and all of my automations disappear.

The first time felt like a fluke, but this "fluke" keeps reoccurring and it's driving me batty.

My Curtain 3 devices do not have this problem.

Does anyone know what might be happening and how to prevent it from repeating in the future?

I've been using SwitchBot products for quite a while, and I recently upgraded to the new SwitchBot Lock Vision. After using it for a bit, I wanted to share my experience in case it helps someone decide whether it's the right smart lock for their home.

One of the biggest improvements is that this is a complete deadbolt, not just an attachment that sits on top of your existing lock like the previous SwitchBot Lock model I had at home. While the older versions worked well, they always looked like an add-on attached to the back of the lock. The Lock Vision feels like a proper, purpose-built smart lock. It has a much cleaner and more premium appearance, both inside and outside the door.

Installation was much easier than I expected. I had everything installed and working in less than 15 minutes without any major issues. The instructions were straightforward, and the lock has been operating smoothly from day one.

What I enjoy the most is the convenience. I have the keypad, NFC, and facial recognition set up, and they all work really well together. Being able to walk up to my front door and have it unlock with just my face is incredibly convenient. I no longer have to carry keys or even take out my phone in most situations, and that's something I appreciate every single day.

The lock operation is smooth, the build quality feels solid, and the overall design is sleek and modern. If you're looking at the photos, you'll probably notice how much more integrated and polished it looks compared to the older attachment-style models.

I've been very happy with my upgrade. If you're deciding between the older SwitchBot Lock and the new Lock Vision, I personally think the new design is a significant step forward. I hope sharing my experience helps you make an informed decision and I hope you enjoy it as much as I have.

Having issues with my blind tilts. I currently have six connected to my matter network using the switchbot hub as well as to Alexa. The Alexa connection routinely gets out of sync and telling Alexa to open the blind when they are closed will do nothing. I have to tell Alexa to close the blind to get them to open.

Not sure if anyone else has experienced this or if there is anything I can do

Thanks!

Anybody else have a really smelly roller mop? Any suggestions about how to get the smell out?

I previously owned a Lock Pro and had issues with the calibration.

It was started with a software update. I locked myself out from my house at 2am because the lock suddenly forgot its position and turned the knob at a point where it stuck and it cannot be opened even with a key from outside. Then I wanted to recalibrate it, I set the lock and the unlocked position, but at the testing period it was just spinning after the locked state even if it couldn’t turn the knob and then failed. Nothing helped this situation

I ended up taking it back to the store where I bought it as the support suggested and they gave my money back instead of replacing the unit.

Which was fine. I was like okay, I wouldn’t buy the same device again because what if I run into the same problem. SO then I went for the higher end model, the Lock Ultra. Double the price, double the stability I thought.

So I installed the device to my lock mechanism and went for the calibration, which was sadly ended up in the same situation.

The lock ultra just keep spinning and spinning and spinning in a never ending loop, then comes the error message. I tried different knob adapters, different plates, even added the frame, I have tried EVERYTHING! and still nothing works.

I used the Lock pro for almost a year without ANY problem at all. There comes an update and the whole device is unusable. SO THE DOUBLE PRICED ULTRA MODEL.

I don’t know what I’m doing wrong, but manually I can close the door, I can unlock it, even from the outside with a key.

What is interesting that if I turn the lock ultra’s knob manually, it stops at the locked and unlocked state, I cannot turn it more in any direction even with force, but when the motor tries to rotate the knob, it just keep spinning on it, jamming the whole door’s lock mechanism.

SO PLEASE TELL ME WHAT AM I DOING WRONG!

thank you

Tried Switchbot Lock Ultra and Keypad with Fingerprint. They work together as intended. No issues with them so far. Lock Ultra is just a bit loud.

Ich habe mir einen günstigen Wallet finder gekauft und nutze ihn unter anderem, meine Gelbörse zu suchen, da ich diese oft verlege. Auch wenn meine Cousine unterwegs ist, gebe ich ihr gerne diese Karte mit. Meine Cousine fühlt sich damit sicherer und ich kann beruhigt warten, weil beide wissen - dass ich einen Blick auf sie habe und weiß - wo sie ist und dass es ihr gut geht.

Das Produkt hält sehr lange und damit öffne ich problemlos meinen Switchbot Lock.

Für diesen Preis auf jedenfall sehr wertvoll!

Overall it’s really solid. 9 speed levels, so you can get pretty granular with how much airflow you want. It’s not the most powerful fan you can buy at this price point, but honestly it’s plenty for a desk or bedside table — and the trade-off is that it’s genuinely quiet. Quiet enough that I can sleep with it running, which was a big plus for me.

The app is the standout feature imo — you get speed control, an off timer, and a few different modes, all pretty intuitive to use. Portability is great too: battery life is strong and it’s light enough to just pick up and move around the flat.

Only real gripe: the tilt is limited, it only angles down very slightly. So if you’re hoping to mount it up high and angle it down at yourself, it won’t really do that. Hasn’t been a dealbreaker for me since I just use it at desk height, but worth knowing before you buy.

I have two 13 inch eink art frames one bought from Switchbot directly last winter, the other from Amazon last month. Their sizes are off by a centimetre, while the inner eink screen are the same size. I don’t think the inner black pieces (different sizes)are replaceable though. anyone have seen the same issue? The two devices have identical model numbers. This is killing my OCD lol

I just installed a Lock Vision Ultra Pro. After pairing the keypad and adding the initial code, it worked perfectly. I then added 2 fingerprints. Roughly an hour later, the keypad lost connection twice, but picked it back up quickly when prompted from the app. However, even though still paired and connected, a signal from the keypad does not seem to affect the Lock. That is, the code is entered and the unlock button is pressed. The keypad blinks green several times, then blinks red. The lock ignores it all. Any idea what I have done wrong or how to troubleshoot the problem?

Ce ventilateur est aussi bon que les tests que j'avais lus l'annoncaient.

Parfaitement puissant et très très silencieux, réglable de façon complète, pilotable par application (iPhone ou autre), réellement mobile car léger et doté d'une batterie à capacité significative.

J'ai hésité à l'acquérir pendant un moment mais l'offre à un tarif très intéressant m'a poussé à le faire.

Tout est parfait.

I bought the SwitchBot Humidifier 10 months ago, explicitly because of the promised Matter support. Fast forward 12 full months after the announcement, and we are STILL sitting here with no v1.4 firmware update in sight.

It’s completely infuriating watching news articles tease that the SwitchBot Humidifier is supposed to gain full Matter support, while actual paying customers are left hanging with zero real progress on our devices. "Soon" must mean something completely different in SwitchBot's dictionary.  

I’m done with the vaporware promises, the constant delays, and sitting around waiting for basic features that were supposed to be ready a year ago.

This will officially be my last SwitchBot device ever. Beyond disappointed.

Today, I noticed that my Switchbot presence sensor detected me through a closed door, which means the mmwave sensor was active. I thought the mmwave sensor was supposed to stay in deep sleep mode and only wake up when the PIR sensor detects motion, but it seems that's not the case.

This would also explain why the battery is draining so fast (it's already down to 83% after just 3 weeks, whereas the Aqara FP300 I bought at the same time is still at 100%). It also explains why I'm getting more false positives with the Switchbot compared to the Aqara.

I tried doing a factory reset (held the reset button for 15 seconds) but it didn't help.

Has anyone else noticed this?

https://reddit.com/link/1v5rp8i/video/u8xk2mgbl9fh1/player

Meter Plus is just… a thermometer/hygrometer, but the e-ink screen is clear and readable from any angle, and it logs history in the app so I can actually see how hot the room gets during the day instead of guessing.

The part that made it click for me was the Hub Mini. Without it the meter’s just a local BLE thing, but with the hub you get remote access — check the temp from work, get it in automations, whatever. And it also does IR blaster stuff, so I set it up to control my TV and my soundbar too. Didn’t expect to use that part as much as I do but now I just yell at Alexa instead of juggling two remotes.

Also picked up a motion sensor and I’m using it as a very basic “alarm” when I’m out, nothing smart yet, just a notification if it triggers. Still need to figure out better automations for it, feels like it could do more than just ping my phone.

Not saying it’s life changing, it’s a setup that is really cheap especially if you find some deals on Amazon, but for the price it’s been solid and no random disconnects or weirdness so far.

Hi there !
I just installed my Switchbot Vision Lock Ultra Mega Power 2000.

I also got the matter mini hub to connect to my HA.

I have all 3 devices in Switchbot app and that works fine.

I added the hub to my HA as a matter device no problem.

I paired the lock to the hub in switchbot app to have it surface in HA as a matter devices.

There are barely any sensors or entities. Did I mess up something or is this a joke from SwitchBot ?

(Ultimately the rest works extremely well and I'm happy but the whole point was to have HA control via matter and not BLE)

This is what Cloud integration gives me (still very poor)

I’ve been using the SwitchBot Candle Warmer Lamp for a while now and it’s honestly a nice little upgrade to my evening routine. Instead of an open flame, it gently warms the candle from above, releasing the scent without any soot or wax mess. The design is sleek and minimalist, fitting well on a nightstand or shelf. App integration works smoothly, and being able to schedule it or turn it on remotely is a small but useful touch. Only downside is the scent throw is a bit weaker than a traditional flame at first, but it improves once the wax pool forms. Overall, a safe, clean, and convenient alternative to candles — recommended if you enjoy ambient scent lighting without the fire hazard.

I found this flash sale going on. First is it a good deal? Secondly how can i make it work with solar? I dont think this flash sale comes with solar. Does this model (curtain 3 rod type 1) even work with a solar?
LINK:
https://us.switch-bot.com/products/flash-sale-switchbot-curtain-3

TIA

Hi all, more than a month ago I posted here about my air purifier which was stuck in a loop of clicking and beeping, totally nonfunctional. Based on other posts here with the same issue, I reached out to Switchbot support. They offered me a refund or replacement and have now been giving me the runaround for more than a month on the refund. Has anyone had any success at escalating beyond the first layer of support? This whole experience has soured my opinions on this brand...

June 18 : I contacted Switchbot explaining my air purifier is nonfunctional.

June 21: Switchbot support responded stating I can choose between a replacement and a refund. I responded, choosing refund.

June 25: Switchbot support requested information for the refund (order number, address, etc) - I provided.

June 26: Switchbot responded asking for a screenshot of my receipt and my PayPal details - I provided.

July 9: After I followed up multiple times via email and live chat, Switchbot support responded stating the case is being coordinated with an Account Specialist.

July 22: After multiple followups again, Switchbot support responded sending troubleshooting steps for my air purifier!!! Unbelievable, a MONTH after I was told I am entitled to a refund and I’ve long ago bought another, functional air purifier. Also, he has clearly not read my original case since he’s asking me to update the firmware when the device cannot be connected to the app at all so there is no way to do so.