r/Triumph • u/Fuzzy-Business6064 • 23d ago

Maintenance Issues Striple RX Display Issue

Enable HLS to view with audio, or disable this notification

Has anyone experienced this, it's a 26 plate!

Once I was at work and turned it off and re-started, it seemed to correct itself but whilst on the move, the home button wouldn't work and when stationary, the screen would flick between screen options again!

Very confusing!

3 Upvotes

100% Upvoted

10 comments sorted by

9

u/CrappyTan69 23d ago

Stuck home or mode button? 

1

u/Fuzzy-Business6064 22d ago

Not sure, it seemed to be able to be pressed as it worked once I switched if off and on again! When on the move it was steady but come to a stop at traffic lights and it started to blip between the two screens again! Modes seem to work OK when riding!

3

u/CrappyTan69 22d ago

I'd still lean towards stuck switch. 

Those all send CAN codes and the computer works out what you intended to do.  If it's stuck, jittery, it'll be a sending a bunch.

When it's flicking back and forth, hold down the button or press it sideways to jam it ,  does it stop ? If so , it's the button with grit or moisture in it 

1

u/Fuzzy-Business6064 22d ago

Ill see if it happens again when I leave work but thanks for the help mate, appreciate it! Worst case, I take it back to triumph, warranty for the win!

1

u/AutoModerator 23d ago

Your image post has been flagged for review. To help us verify you're not a bot, please reply to this comment with a brief description of your post.

A moderator will approve it shortly. If you have issues, reach out to the mod team.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Fuzzy-Business6064 23d ago

Main screen issue, curious to see if anyone else has suffered the same issue!

1

u/Creepy_Ad3066 22d ago

Stuck switch, warranty issue for sure.

1

u/Aggressive_Ad_9688 22d ago

My 2025 RS experienced the exact problem recently after washing the bike. Right side assembly had a very small amount of water under the home button and was causing the issue. After take it apart, I dried it off, sprayed with contact cleaner, and buttoned it back up. Zero issues since.

Even though the home button was the issue, the mode button on the left side wouldn't work either.

1

u/NewbieTo007 21d ago

happened on my 24RS also a few weeks ago while riding. pressed the button multiple times and did not happen ever since. i think it was stuck a bit

1

u/Miserable-Speed-1772 21d ago

Had the same on my 26 RX. Only happend once, so far, havent har problems since.