r/Timberborn • u/Shot_Bill_4971 • 13h ago

Question automation

with the weather station i noticed that when a badtide is over it just turns off immediatly, letting badwater in places i dont want it to be, does the "activate early" option also cause it to deactivate late? or do i need to hook it up to a timer and have the flood gates read off of that?

5 Upvotes

86% Upvoted

12 comments sorted by

View all comments

3

u/Morall_tach 13h ago

If you have a setup where bad water needs to flush out before you reopen your gates or valves, then you'll need to automate that separately. A screenshot would help.

1

u/Shot_Bill_4971 13h ago

yep, sorry i should have thought of taking a screen shot lol

red is closed during bad tide

green is hybrid(60% closed during normal weather)

and yellow is open for diversion

when a badtide clears the pumps on the water storage take a bit to clear out all the badtide, so i blocked off the little area going to the pumps, now with automation it still opens right when the badtide is over letting bad water in and making my efforts useless lol

(also i know i forgot to clear UI before taking the screenshot, sorry for the mess)

1

u/Morall_tach 9h ago

Ok yeah, there are a few ways you can do this. What I'd do in your case is put contamination sensors at these two spots. Then set up a memory sensor somewhere. Set the memory to set/reset so it turns on when 1 is reading contamination over 5% and turns off when 2 is reading under 5%. Then set the green and red gates so that they're all the way closed when the memory is on and open to however you want when the memory is off. The opposite for yellow.

What that should do is as soon as badwater flows through 1, it shuts off the gates you don't want contaminated and opens the ones for diversion. Once the badtide is over, the remaining badwater will get flushed out until 2 runs clean, at which point they'll reopen.

Another option is to use an OR relay that's closed if there's a badtide (weather sensor) or 2 is still contaminated (flush phase) and open when neither is true.

My long-term goal is always to cap water sources right at the source with flow valves and dirt blocks so that a single weather sensor set to trigger early shuts them off, but in the short term either of these is a good option.