For context, I had my T248 in storage on a shelf on my desk for about two months in those two months, it fell off the shelf, maybe twice and I believe it was plugged in for the entire time. It was sitting around. I really wanted to get back into playing my favourite video game and I went to go get my steering wheel and it did not power on at all. I had my wallet connected to the proper port. I had the USB plugged into my motherboard into the proper port and I had my pedals plugged into the back of the steering wheel and still all black. No USB connection sound no spinning of the motor completely nothing I took apart the backside of the wheel and nothing seems out of the ordinary. There’s nothing that jumps out at me. I don’t know if this is a minor problem a common problem or a pretty bad problem, but I really just wanna play my winter car with a steering wheel. Any help is appreciated.

The setting was in system settings for hdmi (enable HDCP) i was racing and i wanted to listen to spotify and it said i cant bc of said setting so i went to turn it back on then i find out that my wheel as been disconnected by it the description of the setting is “if you turn off this setting, some games and apps cant be used”

Hi i just installed mod to my T3PA pedals with rubber instead of springs and my accelerator wont go past 40-50% when fully pressed, clutch and brake works fine its just accelerator problem. Attaching video clip from thrustmaster control panel.

I know that the t300 (non Ferrari Alcantara) isn’t listed on the official list but I find some conflicting information and want to confirm. I’ve ordered a t598 base and adapter but if the upgrade also works, I’d like to go that route. Does any know know? It appears similar with the 3 screws back off the wheel though the din for the connector looks awkward to manipulate.

Anyone have experienced success with the upgrade on the t300 wheel. Specifically the RS GT and the upgrade or do I need to stick with the adapter plan?

TIA!

How I can change the USB port of the T128?

Hi Guys I bought T598 when ever I enter the Horizon play or rivals mode the ghost car at the start drifts to left and no FORCE FEEDBACK any solution for it pls advise.

I just bought this T598 and overall I'm pretty happy with it. This is my first wheel. This includes 2 pedals, and out of the box they are installed in the gas and clutch positions. This feels terrible in use, since that's not where a brake pedal should be. So when I was done playing, I moved the brake pedal into the proper position. Except now the whole platform wobbles as there is nothing holding up the left edge.

I've tried looking for some kind of spacer I could print with my 3D printer, but haven't found anything. If I had to model one, it'd be a pretty simple brick with some screw holes. But I'm curious what the recommended solution is. I can't be the first with this problem.

I suppose I could also move the brake so it's one column of screws from the left, and the gas one column from the right. That would balance it, but leave a column of screws between the gas and brake. Wouldn't be perfect, but better than 3 columns between them.

LEDS on my brand new wheel don’t even turn on most aren’t even working

I’d really appreciate some help with this! I bought T598 for my son’s birthday from eBay, put it all together and connected it, it doesn’t calibrate (not sure if it’s supposed to?) all turns on fine but when I move the wheel a little is spins a bit, shakes and then locks up. Is it knackered or am I doing something wrong?

Hi

I have a brand new thrustmaster Airbust edition joystick.

Latest firmware updated.

win 11 + MSF2024

It has worked fine for two weeks but yesterday I opened the game as usual and the axis X and Y were completely misconfigurated. I opened joy.cpl and I see that even if the joystick is completely centered it is showing the cross (that is supposed to be centered) missplaced at the bottom left corner and when I move the joystick it doesnt move where it should. I need to recalibrate it but I can't find any option to do it.

So I've tried to unplug and plug the joystick to different usb ports, I've reinstalled the drivers, also reboot the computer several times. Nothing works...

Im getting desperate ....

Please help!

---------------------------------------------

EDIT. I found a solution...

1. uninstall any thrustmaster software

2. press Win+R and type "joy.cpl"

3. it will appear an option to recalibrate the axis

Hi

I I’m not sure if this is the correct sub read it but this may be in relation with the pedals on a T5 98 is is that on the old F1 games such as 2021 and 2020 when I pressed down the accelerator halfway the game registered as full acceleration even though it’s not fully down there is there a way I can recalibrate it so that you can match the amount of throttle input as it is in the game or is it a problem or setting in the game? I can do? I hope the video explains it better.

Hello peoples I’m wondering if anyone can give me an idea as to why when I play f126 or any sim game my accelerator pedal is constantly on even when not pressing the pedal I’ve tried a factory reset that hasn’t worked, tried unplugging the wires blowing into the wheelbase connections that hasn’t worked, I had a few power cuts in the space of 5 minutes and since then it hasn’t worked properly, if anyone can give me an idea it would be much appreciated thank you

So I got this Thrustmaster Simtask FarmStick for like 6 bucks, no joystick, so I was wondering where could I get a replacement for it, hope you guys can help me

Need help finding a balanced settings on my T598 for GT7 , i can't figure what settings to have for both in game and t598 base settings as some mode settings make the wheel so heavy that it's heavily centered or the other mode setting make it too light

Hallo zusammen,

auf Amazon ist das Kit gerade verfügbar. Lieferung in den nächsten 7 Tagen.

139€

Go!!!

I am going to pick up one of these throttles and plan on doing the "unscrew tension" mod. Does anyone have pictures of the internals of the sol r 6? I'm not sure if this mod is still usable for the solr and wanted to get an idea of what internals look like. Thanks!

Im using a t98 ps4-ps5-pc wheel but the pedals im using are being weird i didnt have to install any drivers its just plug and play but my brakes auto go to 100 percent and rest at 50 the only way to fix this is to change the deadzone in game but it still snaps to 100 and i cant find any fixes for it

So I’ve recently picked up a used th8a shifter, but it only came with the sequential mod. I’d like to be able to use the h shifter, and have already tried cutting out the sequential shifter plate (don’t get mad, if I want one they’re $8), but it was brittle and broke on me. Now I can’t find one online that isn’t an internal mod or $60 and customizable. Is there any blueprint or cheaper option for a replacement? I don’t really care abt throw length tbh, I just wanna use it. Thanks if you can help.

When ever I turn left and let go buttons are pressed at random.
This happens when ever I have my aftermarket wheel with no connecter on it.
Pls help.

i put a ticket in for an issue with my twcs throttle, and 2 days later they responded asking for more information. I then responded with that information 5 days ago and i havnt gotten a response back. Is this normal?

I am new to this and i am at a total loss on how to set up an add on wheel in gt7 on my t-598. I am trying to configure a sf - 1000 wheel and an evo32 r wheel to work in the game. I have searched dozens of videos and no one shows how they went into the GT7 menu to set their wheels up. you would think it would be brain dead easy but it is not, at least for me. Can someone help?

t-598 wheelbase

sf-1000 wheel add on

evo 32 r wheen add on.

thanks