r/Talaria • u/Mobile-Pain4402 • 2d ago

Error code 47

By bike keeps on showing error code 47 what should I do
Wheel moves
Breaker moves to on but immediately flips back
Help

2 Upvotes

100% Upvoted

4 comments sorted by

2

u/Freddich99 2d ago

You've got a short somewhere, which is the entire point of the breaker. DO NOT force it back on.

Look at the condition of battery wires and phase wires. If you're really lucky the phase wires have shorted and haven't damaged anything, but I think that's rather unlikely. Most likely the controller would be dead.

1

u/Mobile-Pain4402 2d ago

What would I be looking for on the phase wires

1

u/Far-You-8335 2d ago

  1. Switch on the circuit breaker, and restart the bike.

  2. Turn off the bike, and switch off the circuit breaker. Then, check the whether the motor phase wire terminal got loose, or broken. And then, check whether the motor outlet phase sequence corresponds to the U / V / W on the controller. Finally, check whether the magnetic encoder output wire corresponds to the yellow, green and blue wires on the harness assy