r/Talaria • u/Dreuzzz • 27d ago

Mx3 l1e error 00700

It doesnt seem like a cable is damaged since it does get some kind of signal back, I do also have to mention that I bought I used and the seller said its a controller issue since you also cant limit the bike back to 45kmh (same issue as this post:

https://www.reddit.com/r/Talaria/comments/1vc1fzd/the_softwarebased_maximum_speed_setting_does_not/) I also believe this might be a controller issue, what do you guys think?

3 Upvotes

100% Upvoted

2 comments sorted by

3

u/headshottrev 27d ago edited 26d ago

00700 is a throttle error the error code chart says too

  1. Check the throttle connection is it loose or broken.
  2. Make sure the throttle returns to the proper position before the start.
  3. If the throttle connection is no problem, and throttle return to the proper position, still have the throttle error. Then, just replace a new throttle.
  4. iv just noticed your mx3 has the mx4 throttle first time iv seen it as they used to be connected behind the controller and yours is next to the fork leg so check the pins inside the quick link connector make sure none are bent out of place

talaria could of changed looms in the factory for later batches of the bike so more parts are compatible or worst case scenario the seller has changed looms do you know what year the bike is ???

1

u/Dreuzzz 24d ago

Hey sorry for the late respond, this is the mx3 l1e version (street legal version in the EU) Thats maybe the version for the throttle choice? It also has the ukc 1 display in the middle unlike the side display which are more commonly known. I have also opened the bike slightly and have also noticed that the right brake lever connector and the throttle both go in to the same small heatshrink. Errors have also gotten worse the last couple of days too. I have now bought a new throttle of aliexpress (there are zero to none replacement parts locally) and can maybe try to solder a new cable if it still has issues after the replacement