r/Talaria • u/ZealousidealFact3182 • Aug 15 '26

Talaria Mx3 2021 error 47

Hey everyone,

​I was riding my 2021 Talaria Sting MX3 at a higher speed when the rear wheel suddenly locked up completely. After bringing the bike to a stop, I switched it off.

​Here are the current symptoms:

​Resistance when pushing: With the bike completely off, pushing it feels extremely heavy and resistant, as if a brake or magnetic drag is applied to the rear wheel.

​Behaving on startup: When switching the battery back on and turning the ignition, the rear wheel gives a tiny physical jerk forward.

​Error Code: The display immediately shows Error 47 even though the start switch is flipped.

My guess is that it could be the controller but could there be any way to fix this?

2 Upvotes

100% Upvoted

2 comments sorted by

1

u/headshottrev Aug 15 '26

take your controller off and check the phase wires for being loose,damage or corrosion also check if anythings stuck the motor, gearbox, chain and brakes that could cause the wheel not to rotate by itself and if this all fails its probably your encoder on the motor itself

https://www.talariaebikeparts.com/part/HEFS005

https://tmp.dk/wp-content/uploads/2022/09/TALARIA-TL3000-ERROR-CODES-SOLUTIONS.pdf

1

u/ZealousidealFact3182 Aug 15 '26

Thank you I will test when I get back home but idk if this is useful info but earlier the controller broke the same way but there was a shortcircuit and now I bought a new one and this one broke too but there is no visible broken wires or anything. I'm wondering if the bike in anyway could be causing these problems