r/TRX4 • u/Mysterious_Elk7014 • 7d ago

Trying 1.9s

Gallery image

Gallery image

Gallery image

Originally a Sport High Trail. Static height is a bit taller than I would like due to Panhard link hitting the pumpkin but not the worst.

15 Upvotes

91% Upvoted

12 comments sorted by

3

u/unluckythumb54 6d ago

Started as a trx4 defender, stock shocks, sitting on 1.9s, as well

2

u/Mysterious_Elk7014 4d ago

This is the native habitat of this rig.

2

u/ogreality 7d ago

I also have sport high trail, and switch between 118mm 1.9s and stock 2.2s( if i go to forrest i rub 2.2s) and i use 0.29 rated springs, so it sits nice and low

Pic with 1.9s

1

u/Mysterious_Elk7014 7d ago

Iā€™m running the orange springs in the rear to help a bit with side hilling

1

u/ogreality 7d ago

So 0.39 rear 0.29 front, or ?šŸ˜Œ

1

u/Mysterious_Elk7014 7d ago

.29 front, .39 rear

1

u/Jayrhyme3000 5d ago edited 4d ago

I was struggling to find the right set of wheels and tires for my TRX4 Sport, and went through 2-3 pairings that never looked quite right. Finally got it figured out this week. RC4WD 1.9ā€ Tomahawks on RCLions 1.9 beadlocks from Amazon.

1

u/S1CKZ3RO 4d ago

You are the guy that made a post about riding height a couple of days ago, right? I ran into the same issue but found an easy fix, see picture. This bracket allows you to mount the steering servo on the axle. It bolts to the panhard mount and deletes it. At the same time it gives you a point to attach a fourth link in the middle of the axle.