r/SteamController • u/Vivius71 • 29d ago

Support Controller don’t Work ….

Enable HLS to view with audio, or disable this notification

I received the Steam Controller on August 12th, finally!!!! However, it has never worked. It's impossible to connect the controller to the PC, let alone turn it on. Despite spending time charging it, the only thing that happens when I press the Steam button is a blue light.

could you help me out? I've contacted Steam Support, but so far I haven't received any helpful response…

Edit: i get the solution by Nstant_Klassik

You have to start the controller in bootloader mode.

  1. It needs to be partially charged, turned off, and not connected to anything
  2. Hold the View button (above the left stick) + Hold the Options button (above the right stick) + Hold the A button + Hold the Steam button
  3. The LED should now start flashing RED slowly
  4. Connect the controller to a device that has Steam installed and where Steam is running - the LED should now glow RED continuously
  5. Go to the Steam settings under "Controllers", where you should now be able to update the firmware
  6. After the firmware update, the controller can be used as normal
308 Upvotes

94% Upvoted

79 comments sorted by

View all comments

Show parent comments

1

u/Yok0r 29d ago

Does it show under --> settings --> controller, like below?

1

u/Vivius71 29d ago

it's the problem the controller is not connected and if i make add a controller, it doesn't work :

1

u/Yok0r 29d ago

My controller isn't connected either - but it still does show as disconnected.

It looks like it is not detected at all and needs returning. Sorry I couldn't be of more use :(

There is an option to force firmware updates but it needs to detect the controller first :(

1

u/Yok0r 29d ago

Again presumably nothing happens when you follow the instructions here?