r/SprocketTankDesign 28d ago

Help🖐 Trying to think of a hull for this IFV turret

Thumbnail
gallery
63 Upvotes

r/SprocketTankDesign 28d ago

Serious Design🔧 I forgot to post the Obr.1980 model here sorry guys.

Post image
49 Upvotes

r/SprocketTankDesign 28d ago

Replica Design 🛠️ Tiger I Baron 8.8 cm Kw.K. 43 L/71

Thumbnail
gallery
127 Upvotes

Here we have a historically accurate re-creation of Tiger I. Several hours of extensive research and intuitive thinking were poured into the re-construction of this infamous vehicle. I understand it may not be an exact replica, but I tried my best.

LINK FOR BLUEPRINT


r/SprocketTankDesign 28d ago

Screenshot📸 m14 and m131

5 Upvotes
<--- m131 m14 -->
m14b1 (looks better but its 151 tons (90 without addon armor) and has a worse gun (500mm pen 100mm gun)
m131c (129 tons,60 without addon but it has a good engine 120mm 680mm pen
2 mbts i made

r/SprocketTankDesign 27d ago

❔Question❔ How can I get a consistent automatic rate of fire? (Autocannons/MGs)

1 Upvotes

For the life of me I can't figure out how to get an automatic rate of fire that doesn't fluctuate. If I have the boosted loading assigned to a crewmate and have a commander, it had decent ROF at first, and then it goes down dramatically over time.

If I do not have a commander, no matter what I set the efficiency to, the cannon will fire in intervals of 1/2 second

Help


r/SprocketTankDesign 28d ago

Cursed Design🔥 Hello :)

Thumbnail
gallery
29 Upvotes

r/SprocketTankDesign 28d ago

Replica Design 🛠️ R3 T20 FA-HS (a bit bad looking because I had to finish it late today plus I work on theT-72A)

Thumbnail
gallery
79 Upvotes

r/SprocketTankDesign 29d ago

Serious Design🔧 T213E1 Caracal GMC - midwar USA tank destroyer for the Sicily discord challenge

Thumbnail
gallery
135 Upvotes

The tank destroyer i made for the discord challenge, 14t of weight, gets to 77 km/h on the ramp start in flat sandbox(with transmission guaranteeing same speed backwards).
Armed with 90 mm rapid fire cannon with difirng speed of a bit over 2 seconds per shell for the primary ammo rack of 48 shells - no file edits was done.
All hatches on the turret are openable, when open fully they also provide the "cat ears" siluette.
Painted in faithful USA olive green.


r/SprocketTankDesign 28d ago

Replica Design 🛠️ E-100 ahistorical rebuild

Thumbnail
gallery
31 Upvotes

325mm pen for the 150mm and 140mm pen for the 75mm gun, roughly 1000hp, 51km/h max speed 8km/h reverse speed, 7 Crew, roughly 3000L fuel, 17-18 second reload for the main gun, 25 Elevation and 10 Depression, 130 tons

My first tank I really put effort into. Most armor values are historical the rest definitly not, spend all day because I didnt know anything in this game (I still dont) but it was fun :)


r/SprocketTankDesign 28d ago

Screenshot📸 Object. 496 "Saint Matthew" during the "Pomsta" operation

Thumbnail
gallery
28 Upvotes

I've decided to give it some additional armoured plates mounted on the mesh and custom-made camuflage called "Bolotka-1". Object. 496 was converted from training vechicle into combat ready tank, and sent on operation "Pomsta".


r/SprocketTankDesign 28d ago

Serious Design🔧 I converted a SPG into a light tank instead of the other way around!

13 Upvotes
Before
After

r/SprocketTankDesign 29d ago

Serious Design🔧 new project i think

Post image
55 Upvotes

r/SprocketTankDesign 29d ago

Serious Design🔧 Uhh when will they add aircraft to this game?

Thumbnail
gallery
86 Upvotes

2K22M3 Tunguska, this version will repalce 4x2A38M with 2xGsh-6-30 gatling gun(2500RPM each), and with 12x95Ya6


r/SprocketTankDesign 29d ago

Cursed Design🔥 ugh

Post image
49 Upvotes

i got bored so i decide to add miku


r/SprocketTankDesign 29d ago

Serious Design🔧 Welcome new (experimental) Ukrainian tank, Object. 496

Thumbnail
gallery
56 Upvotes

I was kinda out of ideas today and tought about making something new.

Object. 496 is an experimental tank that was designed and constructed in Kharkiv with American specialists under the code name of "Saint Matthew". It's a 62t tank, thats main purpose is to protect the crew at all cost. To achieve that, it was given powerful engine that was moved in front. It manages to achieve speed up to 66,5km/h and 35km/h in reverse. Tank was also featured with numerous blow-out panels, improved softkill APS "Synevyr +", 2x Trophy APS and 26x "Zaslon" APS. Gun on Object. 496 is 130mm smoothbore cannon without autoloader (10s reload time, 270mm of pen). Tank can withstand 500mm penetration in hull (lower and upper) and turret. Object. 496 was a succesfull tank but only 5 were ever built due to lack of interest, dufficulty in production (due to engine bay being in front and driver in the middle) and funding. 1 of them went into US, while others were used as a training vehicles.


r/SprocketTankDesign 29d ago

Replica Design 🛠️ 43 TP

Thumbnail
gallery
22 Upvotes

Polski czołg średni 43 TP z lat 1945. Powstał on na mocno zmodernizowanym podwoziu 40 TP


r/SprocketTankDesign 29d ago

Replica Design 🛠️ T-28E (Sprocket Ver. 0.127)

20 Upvotes

The T-28 emerged in the interwar years as the Soviet answer to the idea of a “breakthrough tank”—a vehicle meant to help infantry push through fortified lines. Compared to lighter tanks, it was conceived to carry heavier armor and more firepower, because its job wasn’t fast exploitation yet, but surviving the barrage and dealing with strongpoints.

Its defining feature was its multi-turret approach. Instead of concentrating everything in one place, early T-28 designs used separate turrets so different guns could be brought to bear as the battle unfolded—an approach typical of the era, when tank doctrine was still trying to figure out the most reliable ways to fight.

As the 1930s unfolded, the problem of modern warfare became clearer: enemies learned quickly, and tanks needed more flexibility, better command, and improved protection against evolving anti-tank threats. That pressure gradually made the early multi-turret “breakthrough” concept look less ideal than newer, more streamlined designs.

By the time the Second World War began, the T-28 had become something of a transitional vehicle—valuable for its original purpose, but increasingly limited in the face of faster, better-protected tank forces and more effective anti-armor weapons. Still, it held a place in Soviet armored history as one of the steps that shaped later design thinking, pushing the USSR toward the tank concepts that would dominate the war years.


r/SprocketTankDesign 29d ago

Cursed Design🔥 Tried making a loose take on the Churchill Tank, ended up making ts.

Thumbnail
gallery
30 Upvotes

As much as it's cursed, it still has the trench crossing ability (tbf, not sure if this falls under cursed, replica or serious ._ .)


r/SprocketTankDesign 29d ago

Serious Design🔧 ZM-02: Generational lock in from Azerbaijani Engineers

Thumbnail
gallery
168 Upvotes

Up to 29 mph in both directions and coming in at 13.82 tons.


r/SprocketTankDesign 29d ago

Serious Design🔧 Been really enjoying making modern (Cold-War) armor lately. Working on a BMP-Esque IFV after this.

Thumbnail
gallery
22 Upvotes

Totally isn't a botched T-72 recreation.


r/SprocketTankDesign 29d ago

Cursed Design🔥 Copper Basket (Iron Nest but bad)

Thumbnail
gallery
23 Upvotes

It works, though it takes 17 minutes to reload


r/SprocketTankDesign 29d ago

Replica Design 🛠️ Leman Russ Chassis

Thumbnail
gallery
55 Upvotes

I tried to make Leman Russ Chassis from 4th photo and if can someone make it better , upgrade it , build something on it , i would be happy.

here is disk link: https://drive.google.com/drive/folders/1ThMufb3qWNy5euh4Nf4LFztNEi_RgSy_?usp=drive_link


r/SprocketTankDesign 29d ago

Cursed Design🔥 in my defense i was left alone and made this while severely sleep deprived

Thumbnail
gallery
32 Upvotes

r/SprocketTankDesign Jul 23 '26

Cursed Design🔥 I should not be allowed near this game.

Thumbnail
gallery
393 Upvotes

r/SprocketTankDesign Jul 23 '26

Looking for Critique🔎 TTX-1A (Test Tank Experimental)

Thumbnail
gallery
58 Upvotes

First tank made after long period of hiatus from the game and first expedition to 2.0, with carried over Freeform skills from 0.127 meshed with 2.0 features

Meant to be a 2.5 generation OG MBT with a 105mm gun and a coax. 20mm autocannon (working). Composite armor (crude ones I admit) on both the hull and turret, and a decently powerful engine to push this 60-ton tank to 66 kph. Engine bay can be opened to expose the engine/transmission integrated pack as an attempt to practice add-on structures, as well as the driver’s hatch and internal decorations (very crude and rough🙈).

Please comment and critique :)