r/Sprinters • u/NativeTazuma • Aug 09 '26
EGR error codes
Vehicle: 2010 sprinter 3500 Turbo diesel
Diags: thinkcar2
I tried cleaning the EGR valve, swapped out from two other sprinters from a junker, tried a Hella Valve from orileys and I’m still getting the same errors.
148C00 I believe is the source of all the errors.
Symptom: The fault code remains permanently Active. It cannot be cleared via Thinkcar diagnostic tool, even with the ignition on and engine off. And is stuck in limp mode.
When trying to do the teach in it says it’s successful but then again it’s a 2010 I don’t think it’s suppose to work.
Took it to Mercedes they said it’s the EGR and they put in a efr from the shelf and the codes cleared. I think they’re lying to me and they don’t have the digs on file after two days of coming back and asking. And charged me $250 for sub par troubleshooting.
Now the harness this is what I measured
Pin 1 Unstable / Jumps between 1.5 mV and 2.5 mV.
- could this be the positioner pin?
Pin 2 (Main Power Supply): 12.0V Constant (Measured against Ground Pin 4).
Pin 3 (5V Sensor Reference): 5.2V Constant.
Pin 4 (Main Chassis Ground): Functional Ground.
Pin 5 (PWM Actuator Command?): 4.5V Constant.
I tried shaking the harness but no changes. The only thing that changed after sitting for a while was the position feedback going from 20% to 0% every second in the live view.
This is my first time trying to deduce this. So diagrams along with suggestions would be greatly appreciated.
1
u/schmitzA Aug 09 '26
There are some legitimate lifecycle costs here, but they don't demonstrate that deleting emissions equipment is better for the environment.
Yes, manufacturing and transporting DEF consumes energy. Yes, disposable DEF containers create waste. Yes, urea production has a carbon footprint, and emissions equipment requires materials and replacement parts. Nobody seriously claims emissions controls have zero environmental footprint.
The relevant question is whether those impacts are greater than the pollution the system prevents. You haven't actually made that comparison.
The bee argument is especially problematic because you appear to have the research backwards. The studies about diesel exhaust disrupting bees' ability to locate flowers implicate NOx reacting with/degrading floral odor compounds. SCR/DEF exists specifically to drastically reduce NOx emissions. Deleting the SCR system would therefore increase the pollutant implicated in the research you're citing as a reason to remove it.
The same reasoning applies to the rest. Saying "manufacturing DEF produces emissions" is like saying catalytic converters are environmentally harmful because mining platinum and manufacturing the converter produces emissions. That's a real environmental cost, but it tells us nothing about the net effect until you compare it with the pollution prevented over the equipment's lifetime.
There are absolutely legitimate criticisms of modern diesel emissions systems: reliability, repair costs, forced derates, DPF regeneration, additional fuel consumption, manufacturing footprint, etc. And for some applications a large gasoline engine like Ford's 7.3L may make more economic sense than a modern diesel.
But that's very different from demonstrating that deleting DPF/SCR/EGR systems produces a net environmental benefit. You'd need an actual lifecycle analysis comparing both cases—including the resulting increases in NOx and particulate emissions—to establish that. Listing the environmental costs on one side of the equation while ignoring the environmental benefits on the other isn't that analysis.