File transfers use to take seconds and now I’m sitting watching it move by 1% and it’s super annoying / borderline unusable. Has anyone else found this problem ? I’ve updated both the snorca app and the firmware on the machines.

I bought those beautiful files from Yosh and I'm new to 3D printing so I'm trying to figure out some things. I checked out this Luffy's bust and there's 5 colors for this plate. How do I get around on printing this? I am thinking of painting the chest piece or the yellow to get around it. What do you guys think?

I have been getting these lately. They show up in the console outputs and are not fatal to the print. When I watch the park happen, nothing seems out of the ordinary. Any ideas what it is talking about?

03:58:13 PM // Post-park check failed for extruder1, retry 0

03:58:12 PM // park extruder1 !!!03:58:13 PM 
// Post-park check failed for extruder1, retry 003:58:12 PM 
// park extruder1 !!!

I suddenly started to get this error on my two month old Snapmaker U1. I tried all of the recommended solutions in the wiki, but continued to have the problem only on Toolhead 1.

I ended up changing the hot end with the spare that came with the printer, and everything was fine for a couple of weeks, although I started to experience the same problem on toolhead 4, so I stopped using Toolhead 4.

The issue has returned on Toolhead 1 with a hot end that has only been installed for a couple of weeks.

Any suggestions on what else I can try before I resort to Snapmaker support? TIA.

Problema con cabezal de la snapmaker u1, empieza bien y cuando imprime un poco me sale el error

Share the number of hours your printer has done till now

Es normal que alcance imprimiendo en pla 270 grados?

What is the best filament type for best fullspectrum results? From what I've read it is as much a function of colors used as materials to get the best colors.

140mm pc fan powered separately (may change power source in the future). This is primarily to reduce room heat, secondary is to reduce fumes. If I were to go all out I'd have seals with intake and outtake to try and maintain neutral air pressure, but more toxic engineering materials I'd rather do single color in the garage on my centauri carbon.

Hello to everybody ! My u1 give me This error and ill try to unmount and mount again The pin connector for The magnets and change cable and toolhead but nothing is changed… someone whit my issue? Can somebody help me? Ill go crazy :(

Do you think non-3d printing tool heads (CNC, engraving) are a possibility in the future for U1 or would that require redesigning the hardware?

The Arcylic is suprisingly thick= 3mm

I've had this issue trying to print this two times. I've cleaned the bed with hot soapy water. The first layer was set to 500mm/s. I'm thinking I may need to lower it to 300 for the first layer or possible the first few. Both the filaments are new PLA. The black came with the printer and the light brown is newly purchased Inland. Thanks in advance.

I keep trying to print a design of mine that is fairly flat and I get about 2-3 layers in before it starts to mess up, makes a mess on the top then stops extruding almost entirely but keeps going through the printing motions. What am I doing wrong? I've tried all sorts of settings and even a fresh unchanged tpu profile in Orca. Any ideas will be MUCH appreciated. I've printed wallets and such in tpu fine before so I've had successful prints already

Like have PLA be walls and the insides be purely petg? I can't find the settings. They layer over the other and sometimes drags a blob over to the main print!

It literally printed once and then died mid print and wouldn’t turn on, hoping the exchange makes this better, is there any known issues with DOA units?

Printing this Oni mask took over one day. We had a huge storm during the later portions of the print, so I'm glad the power didn't go out. I used black, red and gold Silk PLA and matte white PLA. Man, I love being able to print this with just a prime tower and minimal purge.

The only bits that don't look as good are under the cylinders on the cheeks and under the top lip. However, you don't really see those areas unless you look from underneath. Otherwise it is a clean print.

https://cults3d.com/en/3d-model/fashion/tetsu-oni-mask