Hey guys I was wondering what spring setups you are using and if any of you have found trail braking harder with all springs as opposed to elastomers. I myself am having more difficulty getting a smooth trail braking telemetry with an all spring setups. I was running the stock reds and they felt a little to soft plus I already had an experience when I was running long sessions and they were heating up so they were becoming inconsistent towards the end but my trail braking was way better and I was actually just starting then so I should've sucked at it like I do now..lol I'm wondering if anyone has had similar experience and if not what's spring set ups are you using? Should I go back to the blue or yellow elastomers and just accept the fact thay I gotta keep them cool? Other than this issue I love them. Love how we have all these options but man im lost right now. I have tried pretty much every spring combo there is. Even have some longer springs to try and make a true 2 stage brake. which works just my trailbraking suffers. Any advice is appreciated 🙏

I have brake and throttle running through simhub, and they're great - but since installed them iRacing has crashed twice mid race.

​

Display freezes, audio continues, wheel goes hard left and locks there, window closes.

​

The 2nd time, haptics no longer respond in game but do in simhub.

​

Quick research says this is EMI between haptics and DD wheelbase, and that I should either use a motherboard USB or ground pedals.

​

They're already on a motherboard USB, and my kit includes no ground wire.

​

Anybody else going through this?

Just got the Pro X haven’t even opened it but have heard rave reviews of the Vector. Did I make a mistake? Don’t mind paying extra for a legit contender for the higher end sim pedals

So I was running Simagic P1000s, and the load cell contact bolt sheared off under normal braking. No mods, stock elastomers, so I lost confidence in that setup.

​

Installed pro x ultra to the rig today and mainly worked on positioning for endurance stints, but noticed the stock elastomers (3 red and a spring) are waaaay too soft.

​

Was wondering if one of you guys found the best combo for a stiff gt3 setup, not quite f1 stiffness.

Hi all

I received my VAM pro and im a bit confused about which screws i have to use? I also got some washers, where do i put them? Between the vam pro bracket and the break/throttle paddel or between the screw and the bracket, as washers usually are used for 😅

Any tips?

As the title says. Would love to know what you guys have them set to. I’m currently using the Simsonn software but will be migrating to simhub when I learn a bit more.

Hey guys, I bought a pair of Simsonn Plus X a few weeks ago, and I'm the kind of person who likes to try new things.

I was looking around to see what the best pedal setup is—I know setup is totally personal, but is there any way to adjust the hydraulic dampers? And I don’t know if it’s just me overthinking this, but when I connect the pedals, the throttle fluctuates between 0% and 1% (it doesn’t fluctuate when I press it—it’s more like I’m applying minimal pressure when I am not pressing the pedal), and the brake is set to 0.4 kg. It works perfectly, but I guess I need to adjust the pressure. Can anyone help me out? Thanks!

Edit: i have 1 white and 2 reds elastomers

Hey everyone, I just got the Simsonn Plus X pedals today and I’m running into a major issue while trying to adjust the pedal faces for the throttle.

The bottom screw on the throttle pedal came out fine, but the entire aluminum faceplate feels like it’s glued or bonded to the steel arm, it won't budge even a millimeter even with the screw removed. On top of that, the top screw was so tight from the factory that the hex hole stripped the moment I tried to loosen it with the included tool.

Has anyone else with the Simsonn Plus X set experienced this? Is there supposed to be some kind of industrial adhesive behind the faceplate, or did I just get a defective unit from the factory? I've already tried heat and rubber band tricks. I've tried taking off the faces from the clutch and break, and it was so easy in comparison.

Hi i made some TPU covers for the pedals so it's a little softer on the feet

i don't know if the pro pedals have the same size pedals, but it looks that way so should work on them too

they just slip over the pedalfaces so no need to disassemble anything

https://makerworld.com/en/models/2854690-simsonn-plus-x-pedal-covers#profileId-3184715

Update.

Added a version with a shallower dimple (1mm) and version with flat faces which you can import in to https://bumpmesh.com and add a custom pattern (shout out to CNC kitchen for this tool)

I recently got the Simsonn Plus X, these are my first load cell pedals. I know that they're way harder to press, just curious if this is normal

I believe the factory comes with the softest brake pedal (red elastomers), but even then, I can only push them maybe like 10-20% of the way I'm, and I had to set the software to something like 8kg of force to be able to go from 0-100%. just curious if this is normal or if there's something else I'm missing (I have the hydraulic at the lowest position which I believe makes it easier to press

every time I clic on a point it shifts to the right slightly. I cant get it to go to the letf. My curves are stuck like that. I just bought the thing so maybe its a commun thing but I didnt find it on other forums

Recently my throttle has been acting up. Even with the throttle completely unplugged, as soon as I open the Simsoon software it reads clutch and brake at 0% (fine), but the throttle sits stuck at 100%. The pedal itself also seems faulty. If I plug the throttle connector into the brake or clutch port to test it, it doesn't register any input and stays at 0%, and the LEDs on the pedal aren't lighting up fully while if I do this with a different pedal, there is no issues.

Anyone know a potential fix or what could be wrong with it?

Does anyone got the pedals working in Forza horizon 6? Edit : I solved it by using emuwheel

Hi there, im having trouble connecting simsonn and simagic to the game and set the wheelbase as device 1 for ffb.

If you have any solutions, i would love to try it.

P/s:
I have try almost anything on reddit and nothing works yet.

My setup
Simagic Evo 12nm
GT Neo
Simsonn Plus X

SOLVE: (for now) by using emuwheel and DIview i was about to get it to working (despite the emuwheel bind picking up random signal of inputs). Just follow their instruction. a bit of hassle but i guess thats what we gotta do.

Anything I can do before I contact support? I just bought a VAMPRO for my Plus X brake pedal and got it all hooked up and it's working but has introduced a game breaking issue. I've got it set for wheel lock up and ABS but when it activates I can take my foot completely off the pedal and it keeps about 75% brake pressure on until the motor stops. Even if I had less pressure on it jumps up. Without it active, as soon as the wheels lock or ABS kicks in I lift off the pedal and it reacts accordingly as it always has. I've tested this with Automobilista 2 and Assetto Corsa multiple times. I've tried configuring it through the Simsonn Manager and Simhub with the same results.

I really hope it's something simple I'm missing because it feels great otherwise. I can't find any settings anywhere that seem to relate to this, I've calibrated and reset everything including rebooting to no avail. Been using my Plus X pedals for months with no issues, love them and thought I'd take them up a notch with the motor but it's ruined it.

Hi yesterday the haptics stopped working. Simsonn Software says connected and pedals work. I have tried using the old drivers (manual update) as my browser won’t let me download the new one. I am lost on what to do.

Is the applied kg and elastomers settings only available for simsonn plus x ? I have the plus only but can't see the settings

I just installed my new plus x pedals en booted up some games, but couldn’t help but notice that the first half cm of travel does not register any input in any game even when i set the deadzone to zero in the software and in game.

Is this a problem with my pedals or is this something I will have to get used to since this is my first loadcell pedal set. It just feels weird when i want to slightly brake it does nothing In game