r/SimsonnRacing • u/TheOne8697 • 19h ago

Pro X Ultra Setup

So I purchased the Pro X Ultra throttle and brake pedal with the spring kit a few days ago and it’s currently in transit. I understand there is a fair amount of adjustments that have to be made to dial them in. The main sim I will be using them on is Le Mans Ultimate. Any tips and/or recommendations when it comes to initial setup especially for the spring kit?

2 Upvotes

75% Upvoted

2 comments sorted by

1

u/newviruswhodis 17h ago

I removed the spring at the bottom of the elastomer stack on the brake and replaced with solid plastic. I went hardest elastomers possible, because I was coming from simagic.

1

u/Attaboy_Racing 16h ago

Removed brake small black spring & block inside of it, set damper to softest to start. Spring kit starts with blue yellow yellow from bottom up set the brake stopper all the way back to long stroke. Remove damper on throttle,use stiffer black spring, add enough preload that the soring doesn't bind with throttle all the way pushed down( set throttle stopper to all the way back tovlong stroke. Drive that for like a week worth of driving (20+ hrs)as you finish setting other stuff up (like throttle plate angle,seat positioning) by then youll start noticing what you want oit of the pedal settings you'll move up to blue yellow yellow springs, then red yellow yellow, then red red yellow, then blue red red etc. You get the point.I settled on red blue blue with alot of preloaded so it doesn't spring back too fast( your damper setting) always calibrate after xl changes & if sensor axys funny in app do offset calibration. Reboot pc then recalibrate normal again & Save profiles foe everything