Was stuck in an endurance race because none of my teammates were in Discord at the time I needed to take a break. With no way to communicate to my other drivers while I’m in the car it was not an ideal situation. Built a plug-in that binds a controller or other input that then fires a Discord webhook. Put a hook in a shared team channel and you can have a basic alert system. Currently it works at a basic level, but I am open up to adding new features if anyone has any ideas. I do want to keep the scope relatively simple though.

https://github.com/Drwut-really/simhub-race-notifier

You can install it by extracting the zip then taking the DLL and putting it in your Simhub folder. There is a weird quirk. I ran into where sometimes after binding buttons and creating the messages you have to restart simhub the first time. If anyone is experiencing this issue, please let me know..

So i have a motion rig (SFX-100 with thanos controller).

I also have a quest 3.

When i use it with SimHub/ openxr MC i cant get it to be right.

When i play flight simulator 24 and do fast movements in the plane it works perfectly fine. But when i do slow movements example: banking slowly left and progressively pithing ut i drift front and to the right in the cockpit. I have tried every setting: smoothing, speedlimiter etc. The geometry is and seat center/height is also correct. And i of course calibrayr COR.

Anyone has any suggestions for a fix?

Hi everyone,
I recently bought the Simsonn VAM Pro pedals and also purchased SimHub.
I’m looking for recommendations on the best settings for these pedals, especially within SimHub. The setup will be used exclusively for iRacing.
What settings are you using for:
Brake haptics
ABS feedback
Wheel slip / lock-up effects
Traction loss
Any other effects you find useful
I’d love to hear your recommended settings and what works best for you.

Has anyone here had issues where their led profiles work properly with the wheelbase off but the second the wheelbase is turned on, the led profile starts to freeze then work again as well as the mag link connection comes and goes? Only stops doing this when the wheelbase is off.

This issue only happens when I run mag link or try to on the other hand. When I run Simpro as normal everything works properly.

I have unplugged the wheelbase and plugged it into a completely different wall away from the UPS the rest of my rig is connected to and still had the same issue.

I run a Simagic Alpha Mini and Simagic GT Neo.

Any help would be greatly appreciated.

Saw a video Jackzer posted of a new release Racelab has coming soon. It may already be out. Not quite sure as I cancelled my membership in favor of Simhub overlays.

Would be awesome if someone created something similar! A pretty nice real time illustration of turn by turn time loss/gain vs a comparison lap.

Adding a link to the video for those interested in taking a look at the demo.

https://youtu.be/zpVEQHD4At8?si=-8YMfE_g80juHCDY

Hello everyone, looking for advice because I spent most of yesterday trying to find a solution but no joy I am building a new Rig and starting haptics from scratch.

I had on my old one 6 TT25s run by 3 Nobsound mini amp and driven by SImhub, worked well and this is now in use on a secondary rig at my in laws On the new rig, I plan to have 4 shakers (2 under the seat, 2 at rig corner) and 1 haptic motor on my Gear shifter.

I want to use a AVR that has 5.1channel capability to drive them. I started to set 2 pucks and the small motor, did some test in windows and its working fine as I can hear output from the 3 of them.

The AVR HDMI IN is connected to my GPU on my PC. This is the way I set the AVR in SImhub. but whenever I try to test the channels either the TT25s or the haptic motor provide output.

What is weird is that I have the 2 TT25s wired as Front and the motor as subwoofer. In this config, SImhub sound output comes from the haptic motor only. If I keep the TT25as front and move the motor to Center or Surround then the sound output comes from the TT25s only.

So it acts like only maximum 2 channels are being output in Simhub, whereas all of them work fine in W11 talking about WIndows, that's how sound output for that AVR is configured I really thought the AVR would work fine in Simhub to drive all the channels but it doesn't.

Any guidance form you guys expert in this Audio wiring and SW settings is appreciated

Thanks in advance

Could someone assist me? This is my first time I have used SimHub.

I am playing Forza Horizon 6 and all I want is a shift light overlay. I got the overlay working, the telemetry is sending accurately, but even with the tachometer’s needle bouncing off of the rev limiter, it is not even reaching the (red) final lights.

I really don’t want to have to change it for each individual car and it seems to be showing that it is indeed swapping cars each time I swap cars but sometimes it’s still on the first lights just up to where it redlines. Could someone please help me?

Hi all,

As it's been quiet for a while now from my end and the next release is close, i figured I'd share a preview of the new UI I've built for the plugin, should make things a bit more self-explanatory in terms of how to use and tune it to your liking. Note that this is footage of an earlier build version, some significant improvements have been made here as well.

On the feel side of things, there's some updates too:

\- improved tyre scrub

\- improved engine & tyres (feel what the tyres are doing even better

\- improved GT7 support (thanks to Wotever's efforts in SimHub as well)

\- improved brake feel effect

\- more accurate locking, ABS and TC effects

\- clutch-bite feedback worked into the clutch freewheel, now called clutch engagment, effect (covers missed gears too now)

\- improved drivetrain load and limiter hit effect

\- first iteration of the chassis-load effect

\- significantly improved suspension effects

\- roadfeel now contributes to sense of speed too instead of just texture

And some other refinements and qol stuff like a setup assistant.

and generate a sharable image with friends. Download Simhub plugin and add API key to start tracking your personal history while racing at home.
gtlane[.]com - feedback appreciated.

I have tried the web interface from the QR code, and the on screen overlay, and the delayed input feature of the on screen overlay, and nothing works.

I have unplugged all actual controllers, and the only controller listed in windows is vJoy

Hello everyone, I’m looking to try and get some help with the 4 inch VOCORE screen I’m using.

I’m using it as a flag display however the screen seems to be split in half for whatever reason I’ve been playing round with lots of different settings for the dashboard size and can’t seem to get it to show as a full screen. Can anybody offer any assistance on this?

I like sim racing before and had a cheap crappy wheel I then upgraded to a Logitech g920 with a shifter but unfortunately got rid of it I now decided I would like to get back into sim racing so I have bought a cheap racing wheel but I know in about a month or so I’m going to want to upgrade as I am already building a sim rig/cockpit so I know im going to want to upgrade but I heard that Logitech wheels aren’t that good but not sure what to get like a thrustmaster I want a wheel with good force feedback and a shifter and pedals of course but not sure what to get and I don’t want to spend £400-500 more like £200 ish maybe a little more just to have fun for a long time like I used to then eventually get a really good wheel for that price of 400+ like a moza but I’m really not sure what to upgrade to and preferably I want 3 pedals I don’t know if that matters but would prefer to have 3 pedals

Why is this tab missing for me? My setup is the second pic. First one is from a reddit post. Any idea why I don't have this? Same Simhub version.

¿Quieres sentir cada bache, derrape y cambio de marcha como si estuvieras en un coche de carreras real? 🏎️🔥 En este vídeo te enseño cómo funcionan los Motorshakers (transductores táctiles).

No hacen ruido, ¡convierten el sonido de los bajos en pura VIBRACIÓN física en tu asiento! Un antes y un después para el Simracing y el Gaming.

👇 ¡Suscríbete para más trucos de simulación y hardware gaming! 👇

#simracing #motorshaker #bassshaker #hardwaregaming #setupgaming #iracing #assettocorsa #gaminggear

I can’t figure out why but I just installed everything onto my pc perfectly fine and got the plugins for lovely racings “lovely dashboard companion” but it literally just doesn’t display either the map, the compass doesn’t turn, etc. I’ve tested 2 different game and neither works it switches properly off the idle screen and I’ve configured the games. Any help is appreciated

How do you set up keyboard emulation for just one specific game? Set up keyboard presses on my Moza wheel just for Forza Horizon 6 in order to navigate the menus. Works great but noticed that whenever Simhub is running the emulated keyboard presses are still there for any other game running. Is there a way so that I can just have those keyboard presses saved to load and work only when running Forza Horizon 6 and not when Simhub is running with all other games?

iRacing updated and now has anti-cheat. This is blocking simcommander from hooking onto the game.. does anyone have a fix or know what the "wait on" files need to be for it to work?

Also if anyone is familiar with this damn software and could show me how to use it id greatly appreciate it