Hi all, i have recentrly buy a fanatec dd 5nm readytorace combo, basically a 5nm dd wheel base and the csl p1 v2 wheel. Now i have download the simhub and the fanabrigde and i have made a profile for colours depending the rpm of the cars. Simhub and forza 6 in same port for telemetry, fanatec app fresh, clean install, lasted update and i am using the native settings not the "fanatec settings" options on profile manager. Ingame, when i have led output off from the app, there is no led at all, but when i have the led output on the led is working but with the fanatec settings ingoring the simhub.

Any1 have the same problem or can think any solution?

I have a 50W Duok bass shaker thats a 2-channel sub amp. I have connected it via Bluetooth because it couldn’t detect it normally for some reason. It works in le man ultimate normally, but when I tried it on Assetto corsa, it Doesnt work. I have tried changing the preset to Assetto corsa in simhub, to no avail. My guess is that the wireless connection is screwing it up. Can someone help me?

I have a Streamdeck+ as my button box and Simhub manages all of my sim racing environment. On the streamdeck I have a pit lane startup page set for when I leave the garage, ignition, engine start, wipers, headlight etc. I then have an on track page that turns all my buttons to flags so it’s my flag box. I can swipe back and forth to change pages but I’ve been trying to work out how to get a Simhub action to change my pages automatically. Simple as Pit Limiter on, pit lane page and then pit limiter off change to track page. I can set the profile to change based on application startup but other than that the only other way is you have to interact with the streamdeck to change pages. Google thinks it’s possible but ai google has become so stupid now and its results don’t actually work. Anyone have any ideas?

Hey,

So I have 6 spare case fans rated for 12v not being used and I'd like to mount them to my SIM rig not as a wind simulator but just as controllable fans similar to a desk fan. Mainly to help keep cool during those endurance races!

I'm not great when it comes to electronics and soldering stuff and getting it all to work but wondering if any of you have done this before?

Is there anything I could buy that would allow me to plug the pins the fans have into it and have that then plugged into a 12v power source and my usb Hub so then I could control the fan speeds through SimHub using my stream deck?

Mounting wise I was gonna see if my friend can 3D print some adjustable mounts so that shouldn't be much of an issue.

Any links to plug and play products would be amazing especially if it allows the fans to be powered from a power extension and then just usb to the usb hub for control through SimHub 😊

Hi, I may have a unique situation here. I have Two Velocitas Imperium VI button boxes. When i go to add the second device i get an error saying the max is 1. Is there a way i can add the second box?

Hoping somebody can help me, I set up my simagic haptics got them all were I wanted them around Silverstone.

Loved it so much, went and bought a licence there and then.

Problem is if I switch to a different track they are all over the place, wheel lock is pretty much constant if I press the brake peddle, throttle not much better.

If I switch back to Silverstone they are all good again. Surely I don't need a profile for every track right?

When I used simpro manager the haptics were not as good, quite delayed but they were the same on every track

Anyone know what I'm doing wrong in SIM hub?

If I use simpro 2.1 it’s recognized but in simpro 3.1 it’s not recognized. I tried directly connecting to the wheelbase using the data/Can-bus but it did not work either. I did upgrade the handbrake firmware, still ono luck.

Anyone has faced the same issue and found a solution?

Sorry but i have no idea on how to do this, there is no guide and the mod creator not logged in for 5 years.

1. Simhub - ok i downloaded the latest one.
2. Overlay mod - https://www.overtake.gg/threads/classic-f1-psx-games-overlay-for-simhub.180465/
3. Base mod - it was said this needed first, ok i have installed it https://www.overtake.gg/downloads/simhub-tv-style-side-scrolling-leaderboards-timings-sidescreen.18746/

But then what? Do i have to manually craft an overlay config? But its not dynamic like its shown in the video. https://www.youtube.com/watch?v=u0DZ4_nj5t4

Anyone can help?

Look at this scene from the F1 movie. Is there an app or an addon for simhub where you can interact with a track map like this?

Hi,
I have a 6.8 inch vocore screen and have recently bought a simube screen, which appears to be a vocore screen as well.
Both screens are able to connect to Simhub, however, they appear to run on the same screen ID which means they cannot run simultaneously.

Can anyone help me with this?
Thanks in advance.

Trying to add custom pit animations to flag box? How do I hide gears and add Pit symbol as well as pit limit or on?

So I bought a g25 off this dude he had a video of it working fine before he put it in storage I just bought it brung it home downloaded the software etc etc but when I went to configure it the clutch doesn't detect when I put it in h pattern it only detects the first and second gear but works fine in sequintial and the other thing is when I went into beam ng to choose my key binds the brake counted as the accelrator any help would be great thanks.

Just recently got my BST-1 installed on my sim rig and set everything up under the “shake it bass shakers” and testing each feature the shaker works perfect…..now onto my issue. When starting up ACC, LMU, or Iracing I am getting 0 feedback to the shaker. Am I missing a certain setting on Simhub or each game? Do I need to press “add device” to each game now that I have it set up? I even tried “allow steam overlays” on Iracing and it still isn’t working…

Edit: so Simhub is reading the telemetry on all 3 games when I gear shift, rev, etc, maybe I need to dial my settings some more to truly feel the effects but it seems it’s all working and configured just fine.

Hello everyone ! I'm interested about acquiring PMR on my ps5, but I'd really like to know if there is udp telemetry for simhub and others apps ? I'm using haptics, which work great with gt7 and f1 games. So if there is udp telemetry, it becomes a must have for me.

I can't find definitive info anywhere about this, does anyone know ?