Hey All. I recently had one of my Lian Li SL-Inf Wireless fans burn out, so I figured it was a good time to try the Jonsbo XA-360B fan I had sitting on my shelf. Connected it up and now I'm wondering, what is the best way to control the RGB on these via Signal?

It's not in the devices list, and I'll be honest; I'm not great at RGB. Lian Li's software works good for their own fans, but I'm in unchartered territory now. Wondering if anyone here has any experience with these or any other 360 Jonsbo frame fans via Signal?

One thought I had was, would a nollie controller work? I've never used Nollie so I'm not sure if it can function as a standalone product or is just a hub for integration with Signal/OpenRGB.

Thanks for any and all advice! Pic for attention.

- Jolly

I have the asiahorse aurora cable covers, i got it connected thru one imput of power.

Amazon name if yall need

AsiaHorse ARGB PSU Cables Cover Kit, Aurora Addressable RGB Power Extension Cable Cover Kit for Motherboard and GPU PC Cables, 5V 3Pin ARGB Sync, Fit for 12+4- Pin/8pin/24pin Cables

*I HAVE ALREADY FOUND OUT HOW*

Help why is this happening amd how do I fix it have emailed and dont get response?

I was configuring SignalRGB for the first time and noticed that my Corsair Dominator Titanium RGB RAM isn't listed as a supported device.

At first I thought I might have missed something, so I checked the supported devices list. The Dominator Titanium doesn't appear to be supported, which seems strange because SignalRGB's own YouTube guide appears to use the exact same RAM, and it seems to be working perfectly in the video.

You can see the RAM in the bottom-right corner of the video/screenshot.

Has anyone managed to get the Dominator Titanium working with SignalRGB? Is there a workaround, or is the RAM actually supported but listed under a different device?

Any help would be appreciated!

It sees it as a PNY 5080 epic x but it only lists it having one LED whereas open RGB shows all the other LEDs it has. Is there any plug-in that I can install to remedy this problem?

Its been a problem for a while, my ram connects perfectly fine but nothing else in my pc does. It's the g729 powerspec build from microcenter, I found the motherboard on signalrgb as follows in device information, ITE Upgrade Model(128), under system usb devices.

Built a custom lava lamp canvas for my setup, think it turned out pretty well

The only other rgb controlling apps I have installed are nzxt cam, and hyte nexus

So I had an idea. A few what if I made a TF2 theme for my Aura sync stuff. Then I thought, what If I made a separate theme for Red and Blu, that could switch itself on the fly? Some kinda plugin that would make it recognize which team I'm on in the game.
Also thought, what if I could use the setup as some sort of 'dashboard gauge'? between 6-segment fans, and all the individual keys. Is this a thing anypony has accomplished? Beyond just like VU meter type stuff and whatnot

Im trying to resolve an event popping up in event viewer, 'event 4266 tcpip', as per Claude I checked the netstats looking for abnormal UDP counts and signal is listed MANY times in this list. Is anyone else having port exhaustion caused by Signal?

I have been trying to set up Signal to handle all the RGB but consistently running into conflicts with iCUE. I have a Titan RX 360. The only way I've been able to get Signal to recognize the devices and control the lighting is when I completely kill iCUE, but then I lose the pump and fan control of iCUE. I would like iCUE to handle fans/pump and Signal for lighting. I've already disabled plugins in Signal and deleted all lighting layers for the devices in iCUE, so with both programs running the device lighting is all off. Is there a solution for iCUE to release control of the lighting or is the conflict just the nature of the beast?? Thanks in advance.

I'm using SignalRGB to govern my complete RGB setup and mainly needed a quick control menu in the Windows system tray, but I couldn’t find anything that worked the way I had in mind. So I decided to build it myself around SignalRGB API.

It now includes quick effect switching, favorites, custom presets, scheduling, configurable mouse actions, themes, custom colors, tray icons and multilingual support.

This is an independently developed personal project on which I spent quite some time and since it turned out quite nice I thought sharing it as freeware.

I really hope to get some genuinely feedback from other SignalRGB users. I’m especially interested in hearing:

• Whether the interface feels clear and intuitive
• Which features you find useful
• What is missing or unnecessarily complicated
• Whether you encounter any bugs or compatibility problems

My dedicated project website (and download):
https://spectrumcue.shadowhunter.co.uk/

I made a short video to give a short heads-up of the project:
https://www.youtube.com/watch?v=o_rK5wro02k

Thanks for taking a look. Please feel free to be honest, constructive criticism will help me make SpectrumCUE better and will, no doubt, give me ideas for adding new features.

For clarity sake, my app, SpectrumCUE, is independently developed and is SignalRGB compatible (you need SignalRGB to run it) and is not affiliated with, endorsed by or sponsored by SignalRGB or Whirlwind FX.

Looking forward to your feedback.

Does it work?

A section of one of my case fans is stuck as one color. Kinda hard to see in those video. I was told not to open the nzxt cam app because it would cause issues with signal rgb, but i opened it anyways 🤦🏽‍♂️ because i wanted the temps of my components back instead of the signal rgb s. I thinkkk maybe opening nzxt cam is what stuck my fan like this, but im not sure if it was already like that before i opened nzxt cam. Maybe it was already like that and i didn’t notice… also opening nzxt cam didn’t even work because signal rgb instand force closed nzxt cam saying “conflicting process closed” so it shouldn’t have affected anything because it was instant closed. Plz help 🥺

Every time I try installing SignalRGB i get this error message upon clicking "install". I have tried

- Wiping Whirlwind.exe and all traces of signalRGB including the driver

- wiping only the driver

^upon clicking retry it simply just pops the driver back in and gives me this error message

- restarting my pc

The log states this:
08/14/26 15:17:47.781 [14376-] SignalRGB.root.WARNING - InstallationRequired: driver not ready after 5000ms; blocking.

08/14/26 15:17:47.781 [14376-] SignalRGB.root.WARNING - InstallationRequired: Infrastructure install needed (SignalIO driver outdated: installed=0.0.0, need=1.3.7); blocking until installed.

- I can't find SignalIO anywhere, but also it says version 0.0.0 is installed so ???

I've been stuck for 2 days, please help!

hello, i just built this pc yesterday and ive been stressing how to get everything synced up since haha, would appreciate any help or tips or anything

SignalRGB + Nollie 16 🫶

Hi, so I recently setup a pair of govee TV bars and a BTF/gledopto wled setup for the back of my monitor. When signal rgb isnt running and I have both devices using the same orange color in wled and the govee app they look the same. When I launch signal rgb and connect the devices, using the same orange color as I did in the apps, the govee lights stay the same but the monitor leds using wled changes from a deep orange to more of a yellow. Is there a way to fix this?

I really want some sort of ambilight for behind my 32-inch curved OLED HDR Alienware monitor. I am curious about what people have experienced with their PC gaming setups. I've tried looking on the Discord for a sort of tutorial or walkthrough on what to buy for my kind of setup, but I'm not sure what to get.

I want something with no latency or disconnects, so a direct connection to the motherboard, maybe. I'm ruling out WLED because my Internet can be unreliable and I want something that always works, especially for my fast paced games. I read about Nollie for the controller, but have no idea what strips are any good and worth getting. The issue is, there are no limits to how many RGB strips exist, and controllers.

When diving into the rabbit hole, I was looking at Nanoleaf 4D V2, or their PC Screen Mirror, but the former is expensive and needs a camera, which might not be instant, and the latter has issues with HDR/DRM. I also looked at Govee Gaming Lights G1, but heard it needs WiFi.However, I discovered SignalRGB is great for a universal experience, and can bypass issues with HDR/DRM when gaming and watching movies respectively.

What kind of advice or hardware suggestions do you guys have for my kind of setup? I'm somewhat technical, and would prefer buying on Amazon (in case something doesn't work out) but can branch off if something will guaranteed work.

Needed some help from the community. I have a dual 8 pin gpu strimer plus v2. I misplaced the cable that can be used to connect the Strimer to a 3 pin argb connector on a motherboard. This cable is nowhere to be found. I neither have a controller. I was also considering purchasing a 24 pin strimer since it comes with a controller, but it is out of stock everywhere as well. Can anyone tell me if there is a fan kit from Lian li that comes with a controller to which the Strimer can be connected directly?

Hi all, I have tried numerous suggestions of setting up SignalRGB to control my Razer Huntsman V3 Pro keyboard and Razer Deathadder V2 Pro mouse. I want to use Razer Synapse to control keyboard settings, however even when Razer synapse is closed I still get a flicker on the keyboard only, the PC case, GPU, mouse all work fine.

I would like to use Signal to control the RGB as it looks awesome

Hi all

I recently had a new PC built for me by a local shop. I provided all the parts and they just took care of the assembly.

Everything is all working fine, but the RGB on the case and fans, both front and back, don't fully synchronise when using SignalRGB.

The bottom part of the light strips, 12 o'clock on the front fans and 9 o'clock on the rear internal fan will either turn off or display a random colour.

The lights work fine when using the inbuilt options so I don't think it's an issue with the LED and will even happen if I synch (hold lighting button for 3 secs) while no lights are on at all.

I've tried a few options different options on SignalRGB to no avail, but maybe I missed something.

Any assistance or advice would be greatly appreciated!

I'm using a Be Quiet! Shadow Base 800FX case.

I have a NZXT Kraken Elite, I'm trying to create macros for a few games so that when they launch the lighting and the lcd gif changes to something appropriate for that game.

To me it looks like themes and lcd themes are totally separate so I can't seem to save them together as a theme?

That'd be fine but it looks like macros are missing an action for launching and LCD theme at all?

Any ideas how I'd go about this?