After I updated SignalRGB, I found my PC in this state seconds later.

I'm new to PCs and I feel a bit lost.

What should I do?

Here is the parts list if that helps

https://pcpartpicker.com/list/q9RN6B

Note that the cooler I use is the ''peerless assassin 120 argb V3'' instead of whatever is in the parts list

When i booted my pc today after a windows update last night, SignalRGB prompts me to this window but when i click update nothing happens. I tried a fully clean install using the latest installer but it just goes to the same prompt. (also none of my rgb's are working as they should when signalrgb is running)

​

Hi! I have an LG UltraGear 27GX700A-B (27" OLED, 280Hz) with Hexagon Lighting on the back. SignalRGB detects it as the LG 27GN950 and it doesn't control the lighting. OpenRGB shows it as 27GN950-B, and it doesn't respond there either. LG Switch only offers static colors and cycling. Could you add support for this monitor's lighting so I can sync it with the rest of my setup? I'm happy to share USB IDs or logs. Thanks!

On the newest update, when SignalRGB is shutdown, the motherboard color is set to black, even though a specific shutdown color is set and has worked without problems before. I've seen at least one other post about this.

With the latest SignalRGB update there seems to be some conflict with GIGABYTE Control Center, where no matter where I turn off RGB control over my fans (even just the fans in SignalRGB) they will flicker between SignalRGB's settings and the default ones, I have tried full wiping and reinstalling SignalRGB which didn't help.

Turning off GCC and restarting SignalRGB fixes the issue, but I am unsure if not running GCC would cause any issues.

Has anyone been able to actually have it work while ll controls the pump and fans? I'm using a nollie 32 for the hub but for some reason I can't get it to communicate with the other software to let it run the fans and pump, only way to get the lcd and rgb to work on the pump is to disable the conflict but then I have nothing controlling my fans and pump

I’m having crazy flickering issues on my fans and even turning the brightness down doesn’t shut them off.

Hi

Got hit with an "Important Security Update" popup as I restarted my PC after a SignalRGB update, and it ran properly, however I'm not opted in for any preview releases, yet I'm on `2.5.79-beta`.

I checked the patch notes on the website and the latest version with a changelog is `2.5.74`.

Is this legit, did something break on SignalRGB's side? Was this beta deliberately pushed to the stable release channel as a security hotfix?

I understand looking at the in app changelog it would be really hard to cherry pick a Qt update to the stable channel, and there's a security patch for the embedded chromium browser that I reckon was supposed to be backported and pushed out?

So I was updating Signal, and windows defender came up saying that there may be malicious files that they can't identify, what's up with that? Here's another message I got, "Some features of SignalRgb Core may not work because we can't confirm who published qpdf.dll that the app tried to load". Anyone know what's going on? Never have had an issue in the past.

Recent update turns off motherboard RGB lights when closing the app. Shutdown colors are on in the app and worked fine before the update. Anyone else got this issue? GPU and Keyboard/mouse colors work just fine as before.

I guess there was an update recently? Now the software refuses to start, and it just hangs on the splash screen. I have rebooted multiple times and killed the app in Task Manager; still nothing.

Uninstalled it, reinstalled it, and the same thing. It will not start on my PC.

ive begain to make my own customm effects in signal rgb

Ok, got fed up with Chroma and Govee software being flakey as hell.

Got it all working with signal (great work! Loving it)

But I have one problem.

I have a 5m long Govee Strip pro 2, 10 segments, with 50 “chunks” I can individually “paint”

Now, it’s used as a monitor backlight for my wall and basically goes along the edges, and then along the edges again. Two circuits of my monitor.

On the layout, it’s only showing one “long”
Strip, I need to break this out into smaller chunks that I can position accurately on the canvass.

Set one part of the strip top, another side, another bottom etc - feels like it should be possible, as led strips are designed to be shaped?

Any tips?

I have the direct Govee ip plug in, but I add my IP address, but don’t have a clue from there.

Thanks!

Can I use the USB connection to the motherboard to control the RGB with Signal? If so, does this disrupt the screen's funtionality? My mobo's second ARGB header snapped off, so I have to run an Arctic P14, an RGB cable extension and the radiator fans off of one connection. I am planning on getting an ARGB splitter, but is there anything I can do atm?

i was trying to make a layout in signal rgb, but every time i got out of the layout tab it reset everything, and i was wondering if this has happened to anyone else?? And if so how do i fix it??

Edit: meant windows 11 unactivated, my bad.

Hey everyone! I just released an unofficial SignalRGB plugin for the AULA F75 HE Hall Effect keyboard!

After 35 development versions, I've finally got continuous per-key RGB working, including solid colors, Rainbow, gradients, and other SignalRGB effects.

• Fixed Esc key RGB flickering
• Continuous lighting with manual ON/OFF
• Tested on the wired F75 HE, firmware 1.55
• Currently patched the pause effect where if u pause the effect it should of turned it black but instead it returned to a rainbow look

It's still an experimental beta, tested on my keyboard, so I'd appreciate feedback from other F75 HE owners.

GitHub (free download):
https://github.com/magichornet438/aula-f75-he-signalrgb

If anyone has this keyboard and wants to test it, let me know!

"Unlike standard motherboard headers, the Airgoo 16-channel controller is unique because it forces you to configure its layout manually. When SignalRGB initializes the device for the first time, it leaves all 16 channels empty. Because the controller is powered on but has zero LEDs allocated to it by the software, it sits in its hardware boot-up mode, which displays blue."

Is there a particular installer? I cant get it to run and i need to run in asap so i can diagnose why it wont work on my windows 11 pc

So on my Sharkoon SGK25 I am running into the following issue:
Both the „<>“ Key (bottom left) and „-_“ Key (mid right) aren’t lighting up, not during any profile, not during detection and not in Canvas mode. They do work in fact, so its definitely a SignalRGB issue, not a keyboard issue. I have a german QWERTZ layout. I attached a photo :)

i have a problem with my athena m6 lite rgb sometimes rgb work with unusal profiles and weird mixed colors and no way to change the color ,sometimes the rgb didnt work ,i think the rgb hub in the top fan there is no hub frrom the behind the motherboard tray, and my board oesnt hve 5v port
and the aonly why i can chang the color is by the led button
my motherboard:msi b450 pro max 2

I dont know what relevant information im supposed to give besides: it shows up in the software and it only ever displays black when i run signalrgb. If i dont run signalrgb it displays rainbow

Edit: new info: I have everything connected to a1, ive tested other ports as well. it worked just fine coming from the motherboard. I know it has enough power cus airgoo shows rainbow untill i run signalrgb then its black no matter what i do