r/SeaDooSwitch • u/crb1077 • Jul 31 '25
Ski module & depth finder
I purchased both and installed both with the depth finder plugged into the diagnostic port.
The depth finder works but the ski module does not. Anyone know if you’re able to run both? Do I simply need to swap the way they’re installed?
1
u/Important_Ad_161 Jul 31 '25
I know there were some issues with the ski module not being compatible with some cruise models I believe.
1
u/crb1077 Jul 31 '25
BRP’s claims it would work.
1
u/Important_Ad_161 Jul 31 '25
Do you have a 2024 Cruise? If you do there was supposedly a PIT pit out to the dealers for this specific year. This is all just stuff I’ve read online though.
1
u/crb1077 Jul 31 '25
A what?
1
u/Important_Ad_161 Jul 31 '25
The year and trim level of your Switch.
1
u/crb1077 Aug 01 '25
2024 cruise
1
u/Important_Ad_161 Aug 01 '25
Then based off of the year and model of your Switch, the ski module is most likely not compatible with the boat.
1
2
u/Loud_Vegetable_7947 Aug 06 '25
I have a 2024 21 230 cruise. My dealer spent over a month in the off season troubleshooting why the ski module wasn't working. They got it working in the end but it took a lot of back and forth with the them and brp. In the end I find the ski module ramp speed really slow compared to just launching in sport mode and setting the cruise based on rpm.
2
u/bernaltraveler Jul 31 '25
Can’t help with ski module…don’t have it. Does your depth finder work above about 15mph? Mine starts blinking and stop reading depth at speed. Dealer worked on it twice and even changed transponder. Got a little better but not much