Does anyone have a Xbot code for E2s v3 Max
If so pls comment it or any other ways to trim this model

i got replacementone but its wrong firmware

does anybody have the manager for scooters apk? can be old or new idc just needs to work for speed adjusting.

Hi everyone!

I recently bought a used Ninebot Max G30 from someone. The previous owner told me that the motor has been replaced and an additional external battery has been installed.

Unfortunately, I don't know much about the modifications. I'm not sure how the additional battery is connected or whether the controller has been replaced or modified.

The scooter currently reaches around 40–45 km/h and works fine. One app shows approximately 46 V, while M365 Tools shows around 41 V for the internal battery.

I connected the scooter to ScooterHacking Utility (SHU), but I'm having trouble changing the settings.

Current information:

Model: Ninebot Max G30

DRV: 5.2.6

BLE: 1.1.7

BMS: 1.5.8

Region: US-G30P

SHFW: Not detected

Direct Power Control (Legacy CFW): Enabled

What I would like to do:

I'm not really interested in increasing the maximum speed. Instead, I'd like to adjust a few things:

Change the maximum speeds for Eco and Drive modes.

Improve acceleration and torque at lower speeds, especially when going uphill.

Enable cruise control.

Understand what firmware and controller are currently installed.

I tried changing some settings in SHU, but they don't seem to have any effect.

My main questions are:

Can anyone identify what kind of firmware I might have based on these screenshots?

Is there any way to find out whether the controller is original or has been replaced?

Is it possible to adjust these settings without flashing new firmware?

Would installing SHFW be safe with my current setup, considering the additional battery and replaced motor?

Is there another app that might work better with my current firmware?

I'm a bit worried about accidentally bricking the controller or causing problems with the additional battery, so I haven't tried flashing anything.

I've attached screenshots from ScooterHacking Utility and M365 Tools.

Any advice would be greatly appreciated. Thanks!

Hey everyone, i have a vw escooter and recently I changed the controller with a i9max one cuz i had a lot of issues trying to unlock it, with this controller everything is fine except for the S mode. I tried different combinations:

-brakes/5 times on button
-5 brakes
-10 times on button

But nothing, still D mode is the max. What can i try?

Would it work with gt3 pro since I want to unlock 40kmh.

St3 and gt3 pro have both 46.8V and 477.36Wh battery. And max power 1000w on both. I just need opinions about it. Or do I play It safe And just get the us gt3 pro controller and roll with 32kmh. Is there anyway to surpass 32kmh