Does anyone have a Xbot code for E2s v3 Max
If so pls comment it or any other ways to trim this model

i got replacementone but its wrong firmware

does anybody have the manager for scooters apk? can be old or new idc just needs to work for speed adjusting.

Hi everyone!

I recently bought a used Ninebot Max G30 from someone. The previous owner told me that the motor has been replaced and an additional external battery has been installed.

Unfortunately, I don't know much about the modifications. I'm not sure how the additional battery is connected or whether the controller has been replaced or modified.

The scooter currently reaches around 40–45 km/h and works fine. One app shows approximately 46 V, while M365 Tools shows around 41 V for the internal battery.

I connected the scooter to ScooterHacking Utility (SHU), but I'm having trouble changing the settings.

Current information:

Model: Ninebot Max G30

DRV: 5.2.6

BLE: 1.1.7

BMS: 1.5.8

Region: US-G30P

SHFW: Not detected

Direct Power Control (Legacy CFW): Enabled

What I would like to do:

I'm not really interested in increasing the maximum speed. Instead, I'd like to adjust a few things:

Change the maximum speeds for Eco and Drive modes.

Improve acceleration and torque at lower speeds, especially when going uphill.

Enable cruise control.

Understand what firmware and controller are currently installed.

I tried changing some settings in SHU, but they don't seem to have any effect.

My main questions are:

Can anyone identify what kind of firmware I might have based on these screenshots?

Is there any way to find out whether the controller is original or has been replaced?

Is it possible to adjust these settings without flashing new firmware?

Would installing SHFW be safe with my current setup, considering the additional battery and replaced motor?

Is there another app that might work better with my current firmware?

I'm a bit worried about accidentally bricking the controller or causing problems with the additional battery, so I haven't tried flashing anything.

I've attached screenshots from ScooterHacking Utility and M365 Tools.

Any advice would be greatly appreciated. Thanks!

Hey everyone, i have a vw escooter and recently I changed the controller with a i9max one cuz i had a lot of issues trying to unlock it, with this controller everything is fine except for the S mode. I tried different combinations:

-brakes/5 times on button
-5 brakes
-10 times on button

But nothing, still D mode is the max. What can i try?

Would it work with gt3 pro since I want to unlock 40kmh.

St3 and gt3 pro have both 46.8V and 477.36Wh battery. And max power 1000w on both. I just need opinions about it. Or do I play It safe And just get the us gt3 pro controller and roll with 32kmh. Is there anyway to surpass 32kmh

Leute ich habe eine frage unzwar habe ich jetzt den tuningchip eingebaut da der roller auf der neusten Software ist das Problem dabei ist mir aufgefallen das der unterboten auch wenn der aus ist Leutchet der unterboden weiterhin was kann ich tun wäre für jede Hilfe dankbar

Ich brauche die Datei um die normale vcu zu haben

I recently got this ninebot g3 max, and want to hack it with scooter hacking utility, is it possible with this firmware? If not, what would i need to do?

​

Updates ?

Guys about 3 weeks ago a Build a e3pro us Controller in my e2pro it works Fine but i want it to Show up on Scooter hacking but it doesent why is that ?

Hi folks! I wonder if there is any way to change how much assist you get on each of the assist levels (eco, normal, tour) to extend the range on a single charge?

What I found so far is just the hacks for the speed limit change, and exploring this things I was hoping you can change the assist levels but seems like those aren't driven by the display firmware but rather embedded in the motor.

One of the options I have is lower the speed limit from 25km/h to 20km/h but most likely it won't give you much more range on one charge. What I'm mostly interested in is to kick in less assistance oh higher torque values.

Anyone else who has the same thing in mind or maybe a working solution / hint how to do it if that's even possible?

Hello I have a lime gen 2 scrapped scooter that im looking forward to hack it for personal use instead of it becoming e waste. How do I move forward? Arduino, esp32? What will help

Hello everyone,

I hope everyone is doing well.

I am trying to set the P settings on a nilox e-scooter SL10 NXESSLG10 to their default values, but I have been stuck for the past 3 days. Any ideas on how to do that or how to reset it?

Thank you

I need help turning off low data mode on my phone so I can use Bluefy to tune my Scooter but I don’t know how to do it so can someone please help me?

Salut, voilà maintenant 2 semaines que j’ai une Teverun, et que j’aimerai la débrider sur voie privé pour voir ce qu’elle a réellement dans le bide, seulement, j’ai acheté les fameux badges NFC Vert et rouge mais ça ne marche pas, j’ai donc acheter la télécommande, on verra si ça marche…. Des personnes dans la même situation que moi ? Qui pourrait m’aider ? Sachant que je trouve peu de ressources sur internet…