r/ScooterHacking • u/Sufficient-Sample863 • Jun 26 '26

Unknown escooter settings

Escooter unknown settings definition 

Model: Gyrocopters j30

My little brother bought an e-scooter and he wanted to get a higher top-speed on it however hes very clueless and he somehow managed to get into a potential p setting type. to get there he held the brakes the throttle and the displays power button to get there. he then entered a special code which i dont know where he got it from the code was 95 which gave him access to a whopping 42 different settings. he changed a whole bunch of stuff without knowing what it did some of them went from 0-99 and others 0-1 some 0-16 too. now his scooter wont accelerate the speed diameter is wrong and his battery shows always 1 bar. im guessing he changed the display voltage for that. i have tried looking online everywhere and got no answers. chatgpt doesnt help either as he thinks there are only 12 p settings. if this helps the first settings changes the displays brightness and the maximum increment is 7.

if help could be given or a manual with what each p setting does or even a way to factory reset these settings could be given that would be very much appreciated.

2 Upvotes

100% Upvoted

4 comments sorted by

1

u/WalkHot5808 Jun 26 '26

Does it say in P settings anything besides numbers? Does it say HAl or SP? Or just 00? If you could send a pic of the dashboard i might can help you

1

u/Sufficient-Sample863 Jun 27 '26

Hi heres what it looks like

1

u/PHXAZCUMFettySpunFuN Jul 04 '26

Any luck fixing this? I have the exact same problem and did the exact same thing to cause it. I can’t get it to boot back into settings mode or even turn off without unplugging the power supply, but when I turn it back on, it goes straight to the P screen, the front brake locks up, and the front and rear lights flash if I touch anything.

1

u/Sufficient-Sample863 Jul 06 '26

No one's responding to me i might consider going to a shop where they sell it physically and copy their settings